From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Vincent Knecht <vincent.knecht@mailoo.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 1/3] clk: qcom: smd: Add support for MSM8936 rpm clocks
Date: Fri, 1 May 2020 22:57:26 +0200 [thread overview]
Message-ID: <20200501205728.152048-1-konradybcio@gmail.com> (raw)
From: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Vincent Knecht <vincent.knecht@mailoo.org>
---
drivers/clk/qcom/clk-smd-rpm.c | 50 ++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/drivers/clk/qcom/clk-smd-rpm.c b/drivers/clk/qcom/clk-smd-rpm.c
index 52f63ad787ba9..4ac80d8ac6c25 100644
--- a/drivers/clk/qcom/clk-smd-rpm.c
+++ b/drivers/clk/qcom/clk-smd-rpm.c
@@ -452,6 +452,55 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8916 = {
.num_clks = ARRAY_SIZE(msm8916_clks),
};
+/* msm8936 */
+DEFINE_CLK_SMD_RPM(msm8936, pcnoc_clk, pcnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8936, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
+DEFINE_CLK_SMD_RPM(msm8936, bimc_clk, bimc_a_clk, QCOM_SMD_RPM_MEM_CLK, 0);
+DEFINE_CLK_SMD_RPM(msm8936, sysmmnoc_clk, sysmmnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 2);
+DEFINE_CLK_SMD_RPM_QDSS(msm8936, qdss_clk, qdss_a_clk, QCOM_SMD_RPM_MISC_CLK, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, bb_clk1, bb_clk1_a, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, bb_clk2, bb_clk2_a, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, rf_clk1, rf_clk1_a, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER(msm8936, rf_clk2, rf_clk2_a, 5);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, bb_clk1_pin, bb_clk1_a_pin, 1);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, bb_clk2_pin, bb_clk2_a_pin, 2);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, rf_clk1_pin, rf_clk1_a_pin, 4);
+DEFINE_CLK_SMD_RPM_XO_BUFFER_PINCTRL(msm8936, rf_clk2_pin, rf_clk2_a_pin, 5);
+
+static struct clk_smd_rpm *msm8936_clks[] = {
+ [RPM_SMD_PCNOC_CLK] = &msm8936_pcnoc_clk,
+ [RPM_SMD_PCNOC_A_CLK] = &msm8936_pcnoc_a_clk,
+ [RPM_SMD_SNOC_CLK] = &msm8936_snoc_clk,
+ [RPM_SMD_SNOC_A_CLK] = &msm8936_snoc_a_clk,
+ [RPM_SMD_BIMC_CLK] = &msm8936_bimc_clk,
+ [RPM_SMD_BIMC_A_CLK] = &msm8936_bimc_a_clk,
+ [RPM_SMD_SYSMMNOC_CLK] = &msm8936_sysmmnoc_clk,
+ [RPM_SMD_SYSMMNOC_A_CLK] = &msm8936_sysmmnoc_a_clk,
+ [RPM_SMD_QDSS_CLK] = &msm8936_qdss_clk,
+ [RPM_SMD_QDSS_A_CLK] = &msm8936_qdss_a_clk,
+ [RPM_SMD_BB_CLK1] = &msm8936_bb_clk1,
+ [RPM_SMD_BB_CLK1_A] = &msm8936_bb_clk1_a,
+ [RPM_SMD_BB_CLK2] = &msm8936_bb_clk2,
+ [RPM_SMD_BB_CLK2_A] = &msm8936_bb_clk2_a,
+ [RPM_SMD_RF_CLK1] = &msm8936_rf_clk1,
+ [RPM_SMD_RF_CLK1_A] = &msm8936_rf_clk1_a,
+ [RPM_SMD_RF_CLK2] = &msm8936_rf_clk2,
+ [RPM_SMD_RF_CLK2_A] = &msm8936_rf_clk2_a,
+ [RPM_SMD_BB_CLK1_PIN] = &msm8936_bb_clk1_pin,
+ [RPM_SMD_BB_CLK1_A_PIN] = &msm8936_bb_clk1_a_pin,
+ [RPM_SMD_BB_CLK2_PIN] = &msm8936_bb_clk2_pin,
+ [RPM_SMD_BB_CLK2_A_PIN] = &msm8936_bb_clk2_a_pin,
+ [RPM_SMD_RF_CLK1_PIN] = &msm8936_rf_clk1_pin,
+ [RPM_SMD_RF_CLK1_A_PIN] = &msm8936_rf_clk1_a_pin,
+ [RPM_SMD_RF_CLK2_PIN] = &msm8936_rf_clk2_pin,
+ [RPM_SMD_RF_CLK2_A_PIN] = &msm8936_rf_clk2_a_pin,
+};
+
+static const struct rpm_smd_clk_desc rpm_clk_msm8936 = {
+ .clks = msm8936_clks,
+ .num_clks = ARRAY_SIZE(msm8936_clks),
+};
+
/* msm8974 */
DEFINE_CLK_SMD_RPM(msm8974, pnoc_clk, pnoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 0);
DEFINE_CLK_SMD_RPM(msm8974, snoc_clk, snoc_a_clk, QCOM_SMD_RPM_BUS_CLK, 1);
@@ -768,6 +817,7 @@ static const struct rpm_smd_clk_desc rpm_clk_msm8998 = {
static const struct of_device_id rpm_smd_clk_match_table[] = {
{ .compatible = "qcom,rpmcc-msm8916", .data = &rpm_clk_msm8916 },
+ { .compatible = "qcom,rpmcc-msm8936", .data = &rpm_clk_msm8936 },
{ .compatible = "qcom,rpmcc-msm8974", .data = &rpm_clk_msm8974 },
{ .compatible = "qcom,rpmcc-msm8976", .data = &rpm_clk_msm8976 },
{ .compatible = "qcom,rpmcc-msm8996", .data = &rpm_clk_msm8996 },
--
2.26.1
next reply other threads:[~2020-05-01 20:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-01 20:57 Konrad Dybcio [this message]
2020-05-01 20:57 ` [PATCH 2/3] dt-bindings: clock: rpmcc: Document MSM8936 compatible Konrad Dybcio
2020-05-27 3:01 ` Stephen Boyd
2020-05-01 20:57 ` [PATCH 3/3] dt-bindings: soc: qcom: Document MSM8936 SMD RPM compatible Konrad Dybcio
2020-05-27 3:01 ` Stephen Boyd
2020-05-27 3:01 ` [PATCH 1/3] clk: qcom: smd: Add support for MSM8936 rpm clocks Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200501205728.152048-1-konradybcio@gmail.com \
--to=konradybcio@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=skrzynka@konradybcio.pl \
--cc=vincent.knecht@mailoo.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.