[PATCH 2/2] PCI: Prevent Pericom USB controller OHCI/EHCI PME# defect

[Kai-Heng Feng <kai.heng.feng@canonical.com>]

Both Pericom OHCI and EHCI devices support PME# from all power states:
06:00.0 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e] (rev 01) (prog-if 10 [OHCI])
	Subsystem: Pericom Semiconductor PI7C9X442SL USB OHCI Controller [12d8:400e]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at a5502000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-

06:00.2 USB controller [0c03]: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f] (rev 01) (prog-if 20 [EHCI])
	Subsystem: Pericom Semiconductor PI7C9X442SL USB EHCI Controller [12d8:400f]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 19
	Region 0: Memory at a5500000 (32-bit, non-prefetchable) [size=256]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D3 NoSoftRst+ PME-Enable+ DSel=0 DScale=0 PME-

Though my original approach [1] appears to work, further testing shows
that there is a 20% chance PME# won't be asserted when USB device is
plugged.

So remove the PME support for both devices to make USB plugging works.

[1] https://lore.kernel.org/lkml/20191227092405.29588-1-kai.heng.feng@canonical.com/
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205981

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
---
 drivers/pci/quirks.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ca9ed5774eb1..db2590243f0d 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -5568,6 +5568,18 @@ static void pci_fixup_no_d0_pme(struct pci_dev *dev)
 }
 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ASMEDIA, 0x2142, pci_fixup_no_d0_pme);
 
+/*
+ * Device [12d8:0x400e] and [12d8:0x400f]
+ * PME# doesn't always get asserted on all power states claim to support PME#
+ */
+static void pci_fixup_no_pme(struct pci_dev *dev)
+{
+	pci_info(dev, "PME# isn't reliable, disabling it\n");
+	dev->pme_support = 0;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400e, pci_fixup_no_pme);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_PERICOM, 0x400f, pci_fixup_no_pme);
+
 static void apex_pci_fixup_class(struct pci_dev *pdev)
 {
 	pdev->class = (PCI_CLASS_SYSTEM_OTHER << 8) | pdev->class;
-- 
2.17.1