From: Robert Foss <robert.foss@linaro.org> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, Sakari Ailus <sakari.ailus@iki.fi>, Marco Felsch <m.felsch@pengutronix.de>, Maxime Ripard <maxime@cerno.tech>, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Dongchun Zhu <dongchun.zhu@mediatek.com>, Fabio Estevam <festevam@gmail.com>, Tomasz Figa <tfiga@chromium.org>, Ben Kao <ben.kao@intel.com>, Robert Foss <robert.foss@linaro.org> Subject: [PATCH v8 3/3] media: ov8856: Implement sensor module revision identification Date: Mon, 11 May 2020 13:03:50 +0200 [thread overview] Message-ID: <20200511110350.11565-4-robert.foss@linaro.org> (raw) In-Reply-To: <20200511110350.11565-1-robert.foss@linaro.org> Query the sensor for its module revision, and compare it to known revisions. Currently 2A and 1B revision indentification is supported. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- - Changes since v7: * Marco: Align broken line - Changes since v3: * Actually add module revision 2A - Changes since v2: * Add module revision 2A * Sakari: Remove ov8856_check_revision() * Sakari: Stop EEPROM streaming mode drivers/media/i2c/ov8856.c | 53 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c index 68cf2d6c5804..1657e03d9a9d 100644 --- a/drivers/media/i2c/ov8856.c +++ b/drivers/media/i2c/ov8856.c @@ -32,6 +32,19 @@ #define OV8856_MODE_STANDBY 0x00 #define OV8856_MODE_STREAMING 0x01 +/* module revisions */ +#define OV8856_2A_MODULE 0x01 +#define OV8856_1B_MODULE 0x02 + +/* the OTP read-out buffer is at 0x7000 and 0xf is the offset + * of the byte in the OTP that means the module revision + */ +#define OV8856_MODULE_REVISION 0x700f +#define OV8856_OTP_MODE_CTRL 0x3d84 +#define OV8856_OTP_LOAD_CTRL 0x3d81 +#define OV8856_OTP_MODE_AUTO 0x00 +#define OV8856_OTP_LOAD_CTRL_ENABLE BIT(0) + /* vertical-timings from sensor */ #define OV8856_REG_VTS 0x380e #define OV8856_VTS_MAX 0x7fff @@ -1156,6 +1169,46 @@ static int ov8856_identify_module(struct ov8856 *ov8856) return -ENXIO; } + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, + OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING); + if (ret) + return ret; + + ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL, + OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO); + if (ret) { + dev_err(&client->dev, "failed to set otp mode"); + return ret; + } + + ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL, + OV8856_REG_VALUE_08BIT, + OV8856_OTP_LOAD_CTRL_ENABLE); + if (ret) { + dev_err(&client->dev, "failed to enable load control"); + return ret; + } + + ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION, + OV8856_REG_VALUE_08BIT, &val); + if (ret) { + dev_err(&client->dev, "failed to read module revision"); + return ret; + } + + dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n", + val, + val == OV8856_2A_MODULE ? "2A" : + val == OV8856_1B_MODULE ? "1B" : "unknown revision", + client->addr); + + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, + OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY); + if (ret) { + dev_err(&client->dev, "failed to exit streaming mode"); + return ret; + } + return 0; } -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Robert Foss <robert.foss@linaro.org> To: Andy Shevchenko <andriy.shevchenko@linux.intel.com>, Sakari Ailus <sakari.ailus@iki.fi>, Marco Felsch <m.felsch@pengutronix.de>, Maxime Ripard <maxime@cerno.tech>, linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Ben Kao <ben.kao@intel.com>, Fabio Estevam <festevam@gmail.com>, Dongchun Zhu <dongchun.zhu@mediatek.com>, Robert Foss <robert.foss@linaro.org>, Tomasz Figa <tfiga@chromium.org> Subject: [PATCH v8 3/3] media: ov8856: Implement sensor module revision identification Date: Mon, 11 May 2020 13:03:50 +0200 [thread overview] Message-ID: <20200511110350.11565-4-robert.foss@linaro.org> (raw) In-Reply-To: <20200511110350.11565-1-robert.foss@linaro.org> Query the sensor for its module revision, and compare it to known revisions. Currently 2A and 1B revision indentification is supported. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- - Changes since v7: * Marco: Align broken line - Changes since v3: * Actually add module revision 2A - Changes since v2: * Add module revision 2A * Sakari: Remove ov8856_check_revision() * Sakari: Stop EEPROM streaming mode drivers/media/i2c/ov8856.c | 53 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 53 insertions(+) diff --git a/drivers/media/i2c/ov8856.c b/drivers/media/i2c/ov8856.c index 68cf2d6c5804..1657e03d9a9d 100644 --- a/drivers/media/i2c/ov8856.c +++ b/drivers/media/i2c/ov8856.c @@ -32,6 +32,19 @@ #define OV8856_MODE_STANDBY 0x00 #define OV8856_MODE_STREAMING 0x01 +/* module revisions */ +#define OV8856_2A_MODULE 0x01 +#define OV8856_1B_MODULE 0x02 + +/* the OTP read-out buffer is at 0x7000 and 0xf is the offset + * of the byte in the OTP that means the module revision + */ +#define OV8856_MODULE_REVISION 0x700f +#define OV8856_OTP_MODE_CTRL 0x3d84 +#define OV8856_OTP_LOAD_CTRL 0x3d81 +#define OV8856_OTP_MODE_AUTO 0x00 +#define OV8856_OTP_LOAD_CTRL_ENABLE BIT(0) + /* vertical-timings from sensor */ #define OV8856_REG_VTS 0x380e #define OV8856_VTS_MAX 0x7fff @@ -1156,6 +1169,46 @@ static int ov8856_identify_module(struct ov8856 *ov8856) return -ENXIO; } + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, + OV8856_REG_VALUE_08BIT, OV8856_MODE_STREAMING); + if (ret) + return ret; + + ret = ov8856_write_reg(ov8856, OV8856_OTP_MODE_CTRL, + OV8856_REG_VALUE_08BIT, OV8856_OTP_MODE_AUTO); + if (ret) { + dev_err(&client->dev, "failed to set otp mode"); + return ret; + } + + ret = ov8856_write_reg(ov8856, OV8856_OTP_LOAD_CTRL, + OV8856_REG_VALUE_08BIT, + OV8856_OTP_LOAD_CTRL_ENABLE); + if (ret) { + dev_err(&client->dev, "failed to enable load control"); + return ret; + } + + ret = ov8856_read_reg(ov8856, OV8856_MODULE_REVISION, + OV8856_REG_VALUE_08BIT, &val); + if (ret) { + dev_err(&client->dev, "failed to read module revision"); + return ret; + } + + dev_info(&client->dev, "OV8856 revision %x (%s) at address 0x%02x\n", + val, + val == OV8856_2A_MODULE ? "2A" : + val == OV8856_1B_MODULE ? "1B" : "unknown revision", + client->addr); + + ret = ov8856_write_reg(ov8856, OV8856_REG_MODE_SELECT, + OV8856_REG_VALUE_08BIT, OV8856_MODE_STANDBY); + if (ret) { + dev_err(&client->dev, "failed to exit streaming mode"); + return ret; + } + return 0; } -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-11 11:04 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-11 11:03 [PATCH v8 0/3] media: ov8856: Add devicetree support Robert Foss 2020-05-11 11:03 ` Robert Foss 2020-05-11 11:03 ` [PATCH v11 1/3] media: dt-bindings: ov8856: Document YAML bindings Robert Foss 2020-05-11 11:03 ` Robert Foss 2020-05-11 11:03 ` [PATCH v8 2/3] media: ov8856: Add devicetree support Robert Foss 2020-05-11 11:03 ` Robert Foss 2020-05-12 0:25 ` Sakari Ailus 2020-05-12 0:25 ` Sakari Ailus 2020-05-12 8:13 ` Robert Foss 2020-05-12 8:13 ` Robert Foss 2020-05-11 11:03 ` Robert Foss [this message] 2020-05-11 11:03 ` [PATCH v8 3/3] media: ov8856: Implement sensor module revision identification Robert Foss
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200511110350.11565-4-robert.foss@linaro.org \ --to=robert.foss@linaro.org \ --cc=andriy.shevchenko@linux.intel.com \ --cc=ben.kao@intel.com \ --cc=devicetree@vger.kernel.org \ --cc=dongchun.zhu@mediatek.com \ --cc=festevam@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=m.felsch@pengutronix.de \ --cc=maxime@cerno.tech \ --cc=sakari.ailus@iki.fi \ --cc=tfiga@chromium.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.