From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
To: linux-renesas-soc@vger.kernel.org, linux-media@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "Kieran Bingham" <kieran.bingham@ideasonboard.com>,
"Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
"Jacopo Mondi" <jacopo@jmondi.org>,
"Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
sakari.ailus@iki.fi, "Hans Verkuil" <hverkuil@xs4all.nl>,
"Hyun Kwon" <hyunk@xilinx.com>,
"Manivannan Sadhasivam" <manivannan.sadhasivam@linaro.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Jacopo Mondi" <jacopo+renesas@jmondi.org>,
"Laurent Pinchart" <laurent.pinchart+renesas@ideasonboard.com>,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Kieran Bingham" <kieran.bingham+renesas@ideasonboard.com>,
"Rob Herring" <robh@kernel.org>
Subject: [PATCH v9 4/4] media: i2c: Add RDACM20 driver
Date: Tue, 12 May 2020 16:51:05 +0100 [thread overview]
Message-ID: <20200512155105.1068064-5-kieran.bingham+renesas@ideasonboard.com> (raw)
In-Reply-To: <20200512155105.1068064-1-kieran.bingham+renesas@ideasonboard.com>
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
The RDACM20 is a GMSL camera supporting 1280x800 resolution images
developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271
GMSL serializer.
The GMSL link carries power, control (I2C) and video data over a
single coax cable.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
v2:
- Fix MAINTAINERS entry
v3:
- Use new V4L2_MBUS_CSI2_DPHY bus type
- Remove 'always zero' error print
- Fix module description
v5:
- use sleep rather than busy loops for 10 ms delays
- Return ov10635_set_regs directly
- Use devm_kzalloc instead of kzalloc in probe()
- Or in the flags: dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE
- Ensure v4l2_ctrl_handler_free() is called
- rdacm20_probe converted to use .probe_new and drop i2c device id
tables
- Remove rdacm20_g_mbus_config
v7:
- Use new i2c_new_dummy_device API
v8:
- Almost a new version, main changes are:
- Split max9271 out
- Rework bindings to yaml format and include forthcoming RDACM21
- Remove unecessary header file
- Add pixel rate calculation
- Drop unused fields and dead code
- Rebase on media-master v5.7-rc1
- A detailed list of changes provided as fixup patches is avilable at
git://jmondi.org/linux #gmsl/jmondi/media-master/max9286-v8+old-rdacm20+split
which includes the following list of patches:
squash!: rdacm20: Report pixel rate
squash!: rdacm20: Force sensor ID re-read
squash!: rdamc20: Check register programming result
squash!: rdacm20: Update to use the new max9271 APIs
squash!: rdacm20: Start with serial link disabled
squash!: rdacm20: Hard reset the sensor
squash!: rdacm20: Cache i2c addresses
squash!: rdacm20: Adjust to use new max9271 API
squash!: rdacm20: Drop unused format definition
squash!: rdacm20: Refresh file header
squash!: max9271: Add two functions to control addresses
squash!: max9271: Do not rewrite i2c address
squash!: max9271: Improve gpio handling
squash!: max9271: Rework core functions
squash!: max9271 refresh
squash!: rdacm20: Update maintainers file
squash!: rdacm20: Remove unsued/duplicated defines
squash!: rdacm20: Remove header file
squash!: rdacm20: Move content of header into C file
squash!: rdacm20: Reorganize register table
squash!: rdacm20: Fix subdevice flag creation
squash!: rdacm20: Drop i2c id table
squash!: rdacm20: Release control handler
squash!: rdacm20: Better handle i2c dummy error
squash!: rdacm20: Use devm_kzalloc
squash!: rdacm20: Use probe_new()
squash!: rdacm20: Drop deprecated g_mbus_config
media: i2c: rdacm20: Break max9271 out from rdacm20
squash!: rdacm20: Rebase on latest media/maste
media: i2c: Add RDACM20 driver
dt-bindings: media: i2c: Add bindings for IMI RDACM2x
v9:
- Drop OV10635_FORMAT and use MEDIA_BUS_FMT_UYVY8_2X8 as suggested by
Hans
MAINTAINERS | 12 +
drivers/media/i2c/Kconfig | 13 +
drivers/media/i2c/Makefile | 2 +
drivers/media/i2c/max9271.c | 341 ++++++++++++++++++
drivers/media/i2c/max9271.h | 224 ++++++++++++
drivers/media/i2c/rdacm20.c | 667 ++++++++++++++++++++++++++++++++++++
6 files changed, 1259 insertions(+)
create mode 100644 drivers/media/i2c/max9271.c
create mode 100644 drivers/media/i2c/max9271.h
create mode 100644 drivers/media/i2c/rdacm20.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 99e3bf7760fd..713b56652181 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14206,6 +14206,18 @@ S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git dev
F: tools/testing/selftests/rcutorture
+RDACM20 Camera Sensor
+M: Jacopo Mondi <jacopo+renesas@jmondi.org>
+M: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
+M: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
+M: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/imi,rdacm2x-gmsl.yaml
+F: drivers/media/i2c/rdacm20.c
+F: drivers/media/i2c/max9271.c
+F: drivers/media/i2c/max9271.h
+
RDC R-321X SoC
M: Florian Fainelli <florian@openwrt.org>
S: Maintained
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 2e390f41f6da..6e3300760c7f 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -1157,6 +1157,19 @@ config VIDEO_NOON010PC30
source "drivers/media/i2c/m5mols/Kconfig"
+config VIDEO_RDACM20
+ tristate "IMI RDACM20 camera support"
+ depends on I2C
+ select V4L2_FWNODE
+ select VIDEO_V4L2_SUBDEV_API
+ select MEDIA_CONTROLLER
+ help
+ This driver supports the IMI RDACM20 GMSL camera, used in
+ ADAS systems.
+
+ This camera should be used in conjunction with a GMSL
+ deserialiser such as the MAX9286.
+
config VIDEO_RJ54N1
tristate "Sharp RJ54N1CB0C sensor support"
depends on I2C && VIDEO_V4L2
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index f0b001ee4b05..64e6df50f68c 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -118,6 +118,8 @@ obj-$(CONFIG_VIDEO_IMX290) += imx290.o
obj-$(CONFIG_VIDEO_IMX319) += imx319.o
obj-$(CONFIG_VIDEO_IMX355) += imx355.o
obj-$(CONFIG_VIDEO_MAX9286) += max9286.o
+rdacm20-camera_module-objs := rdacm20.o max9271.o
+obj-$(CONFIG_VIDEO_RDACM20) += rdacm20-camera_module.o
obj-$(CONFIG_VIDEO_ST_MIPID02) += st-mipid02.o
obj-$(CONFIG_SDR_MAX2175) += max2175.o
diff --git a/drivers/media/i2c/max9271.c b/drivers/media/i2c/max9271.c
new file mode 100644
index 000000000000..0f6f7a092a46
--- /dev/null
+++ b/drivers/media/i2c/max9271.c
@@ -0,0 +1,341 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2017-2020 Jacopo Mondi
+ * Copyright (C) 2017-2020 Kieran Bingham
+ * Copyright (C) 2017-2020 Laurent Pinchart
+ * Copyright (C) 2017-2020 Niklas Söderlund
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * This file exports functions to control the Maxim MAX9271 GMSL serializer
+ * chip. This is not a self-contained driver, as MAX9271 is usually embedded in
+ * camera modules with at least one image sensor and optional additional
+ * components, such as uController units or ISPs/DSPs.
+ *
+ * Drivers for the camera modules (i.e. rdacm20/21) are expected to use
+ * functions exported from this library driver to maximize code re-use.
+ */
+
+#include <linux/delay.h>
+#include <linux/i2c.h>
+
+#include "max9271.h"
+
+static int max9271_read(struct max9271_device *dev, u8 reg)
+{
+ int ret;
+
+ dev_dbg(&dev->client->dev, "%s(0x%02x)\n", __func__, reg);
+
+ ret = i2c_smbus_read_byte_data(dev->client, reg);
+ if (ret < 0)
+ dev_dbg(&dev->client->dev,
+ "%s: register 0x%02x read failed (%d)\n",
+ __func__, reg, ret);
+
+ return ret;
+}
+
+static int max9271_write(struct max9271_device *dev, u8 reg, u8 val)
+{
+ int ret;
+
+ dev_dbg(&dev->client->dev, "%s(0x%02x, 0x%02x)\n", __func__, reg, val);
+
+ ret = i2c_smbus_write_byte_data(dev->client, reg, val);
+ if (ret < 0)
+ dev_err(&dev->client->dev,
+ "%s: register 0x%02x write failed (%d)\n",
+ __func__, reg, ret);
+
+ return ret;
+}
+
+/*
+ * max9271_pclk_detect() - Detect valid pixel clock from image sensor
+ *
+ * Wait up to 10ms for a valid pixel clock.
+ *
+ * Returns 0 for success, < 0 for pixel clock not properly detected
+ */
+static int max9271_pclk_detect(struct max9271_device *dev)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < 100; i++) {
+ ret = max9271_read(dev, 0x15);
+ if (ret < 0)
+ return ret;
+
+ if (ret & MAX9271_PCLKDET)
+ return 0;
+
+ usleep_range(50, 100);
+ }
+
+ dev_err(&dev->client->dev, "Unable to detect valid pixel clock\n");
+
+ return -EIO;
+}
+
+int max9271_set_serial_link(struct max9271_device *dev, bool enable)
+{
+ int ret;
+ u8 val = MAX9271_REVCCEN | MAX9271_FWDCCEN;
+
+ if (enable) {
+ ret = max9271_pclk_detect(dev);
+ if (ret)
+ return ret;
+
+ val |= MAX9271_SEREN;
+ } else {
+ val |= MAX9271_CLINKEN;
+ }
+
+ /*
+ * The serializer temporarily disables the reverse control channel for
+ * 350µs after starting/stopping the forward serial link, but the
+ * deserializer synchronization time isn't clearly documented.
+ *
+ * According to the serializer datasheet we should wait 3ms, while
+ * according to the deserializer datasheet we should wait 5ms.
+ *
+ * Short delays here appear to show bit-errors in the writes following.
+ * Therefore a conservative delay seems best here.
+ */
+ max9271_write(dev, 0x04, val);
+ usleep_range(5000, 8000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_set_serial_link);
+
+int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config)
+{
+ int ret;
+
+ ret = max9271_write(dev, 0x0d, i2c_config);
+ if (ret)
+ return ret;
+
+ /* The delay required after an I2C bus configuration change is not
+ * characterized in the serializer manual. Sleep up to 5msec to
+ * stay safe.
+ */
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_configure_i2c);
+
+int max9271_set_high_threshold(struct max9271_device *dev, bool enable)
+{
+ int ret;
+
+ ret = max9271_read(dev, 0x08);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Enable or disable reverse channel high threshold to increase
+ * immunity to power supply noise.
+ */
+ max9271_write(dev, 0x08, enable ? ret | BIT(0) : ret & ~BIT(0));
+ usleep_range(2000, 2500);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_set_high_threshold);
+
+int max9271_configure_gmsl_link(struct max9271_device *dev)
+{
+ /*
+ * Configure the GMSL link:
+ *
+ * - Double input mode, high data rate, 24-bit mode
+ * - Latch input data on PCLKIN rising edge
+ * - Enable HS/VS encoding
+ * - 1-bit parity error detection
+ *
+ * TODO: Make the GMSL link configuration parametric.
+ */
+ max9271_write(dev, 0x07, MAX9271_DBL | MAX9271_HVEN |
+ MAX9271_EDC_1BIT_PARITY);
+ usleep_range(5000, 8000);
+
+ /*
+ * Adjust spread spectrum to +4% and auto-detect pixel clock
+ * and serial link rate.
+ */
+ max9271_write(dev, 0x02, MAX9271_SPREAD_SPECT_4 | MAX9271_R02_RES |
+ MAX9271_PCLK_AUTODETECT | MAX9271_SERIAL_AUTODETECT);
+ usleep_range(5000, 8000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_configure_gmsl_link);
+
+int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+ int ret;
+
+ ret = max9271_read(dev, 0x0f);
+ if (ret < 0)
+ return 0;
+
+ ret |= gpio_mask;
+ ret = max9271_write(dev, 0x0f, ret);
+ if (ret < 0) {
+ dev_err(&dev->client->dev, "Failed to set gpio (%d)\n", ret);
+ return ret;
+ }
+
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_set_gpios);
+
+int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+ int ret;
+
+ ret = max9271_read(dev, 0x0f);
+ if (ret < 0)
+ return 0;
+
+ ret &= ~gpio_mask;
+ ret = max9271_write(dev, 0x0f, ret);
+ if (ret < 0) {
+ dev_err(&dev->client->dev, "Failed to clear gpio (%d)\n", ret);
+ return ret;
+ }
+
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_clear_gpios);
+
+int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+ int ret;
+
+ ret = max9271_read(dev, 0x0f);
+ if (ret < 0)
+ return 0;
+
+ /* BIT(0) reserved: GPO is always enabled. */
+ ret |= gpio_mask | BIT(0);
+ ret = max9271_write(dev, 0x0e, ret);
+ if (ret < 0) {
+ dev_err(&dev->client->dev, "Failed to enable gpio (%d)\n", ret);
+ return ret;
+ }
+
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_enable_gpios);
+
+int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask)
+{
+ int ret;
+
+ ret = max9271_read(dev, 0x0f);
+ if (ret < 0)
+ return 0;
+
+ /* BIT(0) reserved: GPO cannot be disabled */
+ ret &= (~gpio_mask | BIT(0));
+ ret = max9271_write(dev, 0x0e, ret);
+ if (ret < 0) {
+ dev_err(&dev->client->dev, "Failed to disable gpio (%d)\n", ret);
+ return ret;
+ }
+
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_disable_gpios);
+
+int max9271_verify_id(struct max9271_device *dev)
+{
+ int ret;
+
+ ret = max9271_read(dev, 0x1e);
+ if (ret < 0) {
+ dev_err(&dev->client->dev, "MAX9271 ID read failed (%d)\n",
+ ret);
+ return ret;
+ }
+
+ if (ret != MAX9271_ID) {
+ dev_err(&dev->client->dev, "MAX9271 ID mismatch (0x%02x)\n",
+ ret);
+ return -ENXIO;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_verify_id);
+
+int max9271_set_address(struct max9271_device *dev, u8 addr)
+{
+ int ret;
+
+ ret = max9271_write(dev, 0x00, addr << 1);
+ if (ret < 0) {
+ dev_err(&dev->client->dev,
+ "MAX9271 I2C address change failed (%d)\n", ret);
+ return ret;
+ }
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_set_address);
+
+int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr)
+{
+ int ret;
+
+ ret = max9271_write(dev, 0x01, addr << 1);
+ if (ret < 0) {
+ dev_err(&dev->client->dev,
+ "MAX9271 deserializer address set failed (%d)\n", ret);
+ return ret;
+ }
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_set_deserializer_address);
+
+int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest)
+{
+ int ret;
+
+ ret = max9271_write(dev, 0x09, source << 1);
+ if (ret < 0) {
+ dev_err(&dev->client->dev,
+ "MAX9271 I2C translation setup failed (%d)\n", ret);
+ return ret;
+ }
+ usleep_range(3500, 5000);
+
+ ret = max9271_write(dev, 0x0a, dest << 1);
+ if (ret < 0) {
+ dev_err(&dev->client->dev,
+ "MAX9271 I2C translation setup failed (%d)\n", ret);
+ return ret;
+ }
+ usleep_range(3500, 5000);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(max9271_set_translation);
diff --git a/drivers/media/i2c/max9271.h b/drivers/media/i2c/max9271.h
new file mode 100644
index 000000000000..d78fb21441e9
--- /dev/null
+++ b/drivers/media/i2c/max9271.h
@@ -0,0 +1,224 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2017-2020 Jacopo Mondi
+ * Copyright (C) 2017-2020 Kieran Bingham
+ * Copyright (C) 2017-2020 Laurent Pinchart
+ * Copyright (C) 2017-2020 Niklas Söderlund
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+#include <linux/i2c.h>
+
+#define MAX9271_DEFAULT_ADDR 0x40
+
+/* Register 0x02 */
+#define MAX9271_SPREAD_SPECT_0 (0 << 5)
+#define MAX9271_SPREAD_SPECT_05 (1 << 5)
+#define MAX9271_SPREAD_SPECT_15 (2 << 5)
+#define MAX9271_SPREAD_SPECT_1 (5 << 5)
+#define MAX9271_SPREAD_SPECT_2 (3 << 5)
+#define MAX9271_SPREAD_SPECT_3 (6 << 5)
+#define MAX9271_SPREAD_SPECT_4 (7 << 5)
+#define MAX9271_R02_RES BIT(4)
+#define MAX9271_PCLK_AUTODETECT (3 << 2)
+#define MAX9271_SERIAL_AUTODETECT (0x03)
+/* Register 0x04 */
+#define MAX9271_SEREN BIT(7)
+#define MAX9271_CLINKEN BIT(6)
+#define MAX9271_PRBSEN BIT(5)
+#define MAX9271_SLEEP BIT(4)
+#define MAX9271_INTTYPE_I2C (0 << 2)
+#define MAX9271_INTTYPE_UART (1 << 2)
+#define MAX9271_INTTYPE_NONE (2 << 2)
+#define MAX9271_REVCCEN BIT(1)
+#define MAX9271_FWDCCEN BIT(0)
+/* Register 0x07 */
+#define MAX9271_DBL BIT(7)
+#define MAX9271_DRS BIT(6)
+#define MAX9271_BWS BIT(5)
+#define MAX9271_ES BIT(4)
+#define MAX9271_HVEN BIT(2)
+#define MAX9271_EDC_1BIT_PARITY (0 << 0)
+#define MAX9271_EDC_6BIT_CRC (1 << 0)
+#define MAX9271_EDC_6BIT_HAMMING (2 << 0)
+/* Register 0x08 */
+#define MAX9271_INVVS BIT(7)
+#define MAX9271_INVHS BIT(6)
+#define MAX9271_REV_LOGAIN BIT(3)
+#define MAX9271_REV_HIVTH BIT(0)
+/* Register 0x09 */
+#define MAX9271_ID 0x09
+/* Register 0x0d */
+#define MAX9271_I2CLOCACK BIT(7)
+#define MAX9271_I2CSLVSH_1046NS_469NS (3 << 5)
+#define MAX9271_I2CSLVSH_938NS_352NS (2 << 5)
+#define MAX9271_I2CSLVSH_469NS_234NS (1 << 5)
+#define MAX9271_I2CSLVSH_352NS_117NS (0 << 5)
+#define MAX9271_I2CMSTBT_837KBPS (7 << 2)
+#define MAX9271_I2CMSTBT_533KBPS (6 << 2)
+#define MAX9271_I2CMSTBT_339KBPS (5 << 2)
+#define MAX9271_I2CMSTBT_173KBPS (4 << 2)
+#define MAX9271_I2CMSTBT_105KBPS (3 << 2)
+#define MAX9271_I2CMSTBT_84KBPS (2 << 2)
+#define MAX9271_I2CMSTBT_28KBPS (1 << 2)
+#define MAX9271_I2CMSTBT_8KBPS (0 << 2)
+#define MAX9271_I2CSLVTO_NONE (3 << 0)
+#define MAX9271_I2CSLVTO_1024US (2 << 0)
+#define MAX9271_I2CSLVTO_256US (1 << 0)
+#define MAX9271_I2CSLVTO_64US (0 << 0)
+/* Register 0x0f */
+#define MAX9271_GPIO5OUT BIT(5)
+#define MAX9271_GPIO4OUT BIT(4)
+#define MAX9271_GPIO3OUT BIT(3)
+#define MAX9271_GPIO2OUT BIT(2)
+#define MAX9271_GPIO1OUT BIT(1)
+#define MAX9271_GPO BIT(0)
+/* Register 0x15 */
+#define MAX9271_PCLKDET BIT(0)
+
+/**
+ * struct max9271_device - max9271 device
+ * @client: The i2c client for the max9271 instance
+ */
+struct max9271_device {
+ struct i2c_client *client;
+};
+
+/**
+ * max9271_set_serial_link() - Enable/disable serial link
+ * @dev: The max9271 device
+ * @enable: Serial link enable/disable flag
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_serial_link(struct max9271_device *dev, bool enable);
+
+/**
+ * max9271_configure_i2c() - Configure I2C bus parameters
+ * @dev: The max9271 device
+ * @i2c_config: The I2C bus configuration bit mask
+ *
+ * Configure MAX9271 I2C interface. The bus configuration provided in the
+ * @i2c_config parameter shall be assembled using bit values defined by the
+ * MAX9271_I2C* macros.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_configure_i2c(struct max9271_device *dev, u8 i2c_config);
+
+/**
+ * max9271_set_high_threshold() - Enable or disable reverse channel high
+ * threshold
+ * @dev: The max9271 device
+ * @enable: High threshold enable/disable flag
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_high_threshold(struct max9271_device *dev, bool enable);
+
+/**
+ * max9271_configure_gmsl_link() - Configure the GMSL link
+ * @dev: The max9271 device
+ *
+ * FIXME: the GMSL link configuration is currently hardcoded and performed
+ * by programming registers 0x04, 0x07 and 0x02.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_configure_gmsl_link(struct max9271_device *dev);
+
+/**
+ * max9271_set_gpios() - Set gpio lines to physical high value
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to set to high value
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]*
+ * bit values.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_clear_gpios() - Set gpio lines to physical low value
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to set to low value
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GP[IO|O]*
+ * bit values.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_clear_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_enable_gpios() - Enable gpio lines
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to enable
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO*
+ * bit values. GPO line is always enabled by default.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_enable_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_disable_gpios() - Disable gpio lines
+ * @dev: The max9271 device
+ * @gpio_mask: The mask of gpio lines to disable
+ *
+ * The @gpio_mask parameter shall be assembled using the MAX9271_GPIO*
+ * bit values. GPO line is always enabled by default and cannot be disabled.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_disable_gpios(struct max9271_device *dev, u8 gpio_mask);
+
+/**
+ * max9271_verify_id() - Read and verify MAX9271 id
+ * @dev: The max9271 device
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_verify_id(struct max9271_device *dev);
+
+/**
+ * max9271_set_address() - Program a new I2C address
+ * @dev: The max9271 device
+ * @addr: The new I2C address in 7-bit format
+ *
+ * This function only takes care of programming the new I2C address @addr to
+ * in the MAX9271 chip registers, it is responsiblity of the caller to set
+ * the i2c address client to the @addr value to be able to communicate with
+ * the MAX9271 chip using the I2C framework APIs after this function returns.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_address(struct max9271_device *dev, u8 addr);
+
+/**
+ * max9271_set_deserializer_address() - Program the remote deserializer address
+ * @dev: The max9271 device
+ * @addr: The deserializer I2C address in 7-bit format
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_deserializer_address(struct max9271_device *dev, u8 addr);
+
+/**
+ * max9271_set_translation() - Program I2C address translation
+ * @dev: The max9271 device
+ * @source: The I2C source address
+ * @dest: The I2C destination address
+ *
+ * Program address translation from @source to @dest. This is required to
+ * communicate with local devices that do not support address reprogramming.
+ *
+ * TODO: The device supports translation of two address, this function currently
+ * supports a single one.
+ *
+ * Return 0 on success or a negative error code on failure
+ */
+int max9271_set_translation(struct max9271_device *dev, u8 source, u8 dest);
diff --git a/drivers/media/i2c/rdacm20.c b/drivers/media/i2c/rdacm20.c
new file mode 100644
index 000000000000..cda3e6372ea9
--- /dev/null
+++ b/drivers/media/i2c/rdacm20.c
@@ -0,0 +1,667 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * IMI RDACM20 GMSL Camera Driver
+ *
+ * Copyright (C) 2017-2020 Jacopo Mondi
+ * Copyright (C) 2017-2020 Kieran Bingham
+ * Copyright (C) 2017-2019 Laurent Pinchart
+ * Copyright (C) 2017-2019 Niklas Söderlund
+ * Copyright (C) 2016 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ */
+
+/*
+ * The camera is made of an Omnivision OV10635 sensor connected to a Maxim
+ * MAX9271 GMSL serializer.
+ */
+
+#include <linux/delay.h>
+#include <linux/fwnode.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/videodev2.h>
+
+#include <media/v4l2-async.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-subdev.h>
+
+#include "max9271.h"
+
+#define OV10635_I2C_ADDRESS 0x30
+
+#define OV10635_SOFTWARE_RESET 0x0103
+#define OV10635_PID 0x300a
+#define OV10635_VER 0x300b
+#define OV10635_SC_CMMN_SCCB_ID 0x300c
+#define OV10635_SC_CMMN_SCCB_ID_SELECT BIT(0)
+#define OV10635_VERSION 0xa635
+
+#define OV10635_WIDTH 1280
+#define OV10635_HEIGHT 800
+
+/* VTS = PCLK / FPS / HTS / 2 (= 88MHz / 1572 / 30 / 2) */
+#define OV10635_HTS 1572
+/* FPS = 29,9998 */
+#define OV10635_VTS 933
+
+/*
+ * As the drivers supports a single MEDIA_BUS_FMT_UYVY8_2X8 format we
+ * can harcode the pixel rate.
+ *
+ * PCLK is fed through the system clock, programmed @88MHz.
+ * MEDIA_BUS_FMT_UYVY8_2X8 format = 2 samples per pixel.
+ *
+ * Pixelrate = PCLK / 2
+ * FPS = (OV10635_VTS * OV10635_HTS) / PixelRate
+ * = 29,9998
+ */
+#define OV10635_PIXEL_RATE (44000000)
+
+static const struct ov10635_reg {
+ u16 reg;
+ u8 val;
+} ov10635_regs_wizard[] = {
+ { 0x301b, 0xff }, { 0x301c, 0xff }, { 0x301a, 0xff }, { 0x3011, 0x42 },
+ { 0x6900, 0x0c }, { 0x6901, 0x19 }, { 0x3503, 0x10 }, { 0x3025, 0x03 },
+ { 0x3003, 0x16 }, { 0x3004, 0x30 }, { 0x3005, 0x40 }, { 0x3006, 0x91 },
+ { 0x3600, 0x74 }, { 0x3601, 0x2b }, { 0x3612, 0x00 }, { 0x3611, 0x67 },
+ { 0x3633, 0xca }, { 0x3602, 0xaf }, { 0x3603, 0x04 }, { 0x3630, 0x28 },
+ { 0x3631, 0x16 }, { 0x3714, 0x10 }, { 0x371d, 0x01 }, { 0x4300, 0x3a },
+ { 0x3007, 0x01 }, { 0x3024, 0x03 }, { 0x3020, 0x0a }, { 0x3702, 0x0d },
+ { 0x3703, 0x20 }, { 0x3704, 0x15 }, { 0x3709, 0xa8 }, { 0x370c, 0xc7 },
+ { 0x370d, 0x80 }, { 0x3712, 0x00 }, { 0x3713, 0x20 }, { 0x3715, 0x04 },
+ { 0x381d, 0x40 }, { 0x381c, 0x00 }, { 0x3822, 0x50 }, { 0x3824, 0x10 },
+ { 0x3815, 0x8c }, { 0x3804, 0x05 }, { 0x3805, 0x1f }, { 0x3800, 0x00 },
+ { 0x3801, 0x00 }, { 0x3806, 0x03 }, { 0x3807, 0x28 }, { 0x3802, 0x00 },
+ { 0x3803, 0x07 }, { 0x3808, 0x05 }, { 0x3809, 0x00 }, { 0x380a, 0x03 },
+ { 0x380b, 0x20 }, { 0x380c, OV10635_HTS >> 8 },
+ { 0x380d, OV10635_HTS & 0xff }, { 0x380e, OV10635_VTS >> 8 },
+ { 0x380f, OV10635_VTS & 0xff }, { 0x3813, 0x02 }, { 0x3811, 0x08 },
+ { 0x381f, 0x0c }, { 0x3819, 0x04 }, { 0x3804, 0x01 }, { 0x3805, 0x00 },
+ { 0x3828, 0x03 }, { 0x3829, 0x10 }, { 0x382a, 0x10 }, { 0x3621, 0x63 },
+ { 0x5005, 0x08 }, { 0x56d5, 0x00 }, { 0x56d6, 0x80 }, { 0x56d7, 0x00 },
+ { 0x56d8, 0x00 }, { 0x56d9, 0x00 }, { 0x56da, 0x80 }, { 0x56db, 0x00 },
+ { 0x56dc, 0x00 }, { 0x56e8, 0x00 }, { 0x56e9, 0x7f }, { 0x56ea, 0x00 },
+ { 0x56eb, 0x7f }, { 0x5100, 0x00 }, { 0x5101, 0x80 }, { 0x5102, 0x00 },
+ { 0x5103, 0x80 }, { 0x5104, 0x00 }, { 0x5105, 0x80 }, { 0x5106, 0x00 },
+ { 0x5107, 0x80 }, { 0x5108, 0x00 }, { 0x5109, 0x00 }, { 0x510a, 0x00 },
+ { 0x510b, 0x00 }, { 0x510c, 0x00 }, { 0x510d, 0x00 }, { 0x510e, 0x00 },
+ { 0x510f, 0x00 }, { 0x5110, 0x00 }, { 0x5111, 0x80 }, { 0x5112, 0x00 },
+ { 0x5113, 0x80 }, { 0x5114, 0x00 }, { 0x5115, 0x80 }, { 0x5116, 0x00 },
+ { 0x5117, 0x80 }, { 0x5118, 0x00 }, { 0x5119, 0x00 }, { 0x511a, 0x00 },
+ { 0x511b, 0x00 }, { 0x511c, 0x00 }, { 0x511d, 0x00 }, { 0x511e, 0x00 },
+ { 0x511f, 0x00 }, { 0x56d0, 0x00 }, { 0x5006, 0x04 }, { 0x5608, 0x05 },
+ { 0x52d7, 0x06 }, { 0x528d, 0x08 }, { 0x5293, 0x12 }, { 0x52d3, 0x12 },
+ { 0x5288, 0x06 }, { 0x5289, 0x20 }, { 0x52c8, 0x06 }, { 0x52c9, 0x20 },
+ { 0x52cd, 0x04 }, { 0x5381, 0x00 }, { 0x5382, 0xff }, { 0x5589, 0x76 },
+ { 0x558a, 0x47 }, { 0x558b, 0xef }, { 0x558c, 0xc9 }, { 0x558d, 0x49 },
+ { 0x558e, 0x30 }, { 0x558f, 0x67 }, { 0x5590, 0x3f }, { 0x5591, 0xf0 },
+ { 0x5592, 0x10 }, { 0x55a2, 0x6d }, { 0x55a3, 0x55 }, { 0x55a4, 0xc3 },
+ { 0x55a5, 0xb5 }, { 0x55a6, 0x43 }, { 0x55a7, 0x38 }, { 0x55a8, 0x5f },
+ { 0x55a9, 0x4b }, { 0x55aa, 0xf0 }, { 0x55ab, 0x10 }, { 0x5581, 0x52 },
+ { 0x5300, 0x01 }, { 0x5301, 0x00 }, { 0x5302, 0x00 }, { 0x5303, 0x0e },
+ { 0x5304, 0x00 }, { 0x5305, 0x0e }, { 0x5306, 0x00 }, { 0x5307, 0x36 },
+ { 0x5308, 0x00 }, { 0x5309, 0xd9 }, { 0x530a, 0x00 }, { 0x530b, 0x0f },
+ { 0x530c, 0x00 }, { 0x530d, 0x2c }, { 0x530e, 0x00 }, { 0x530f, 0x59 },
+ { 0x5310, 0x00 }, { 0x5311, 0x7b }, { 0x5312, 0x00 }, { 0x5313, 0x22 },
+ { 0x5314, 0x00 }, { 0x5315, 0xd5 }, { 0x5316, 0x00 }, { 0x5317, 0x13 },
+ { 0x5318, 0x00 }, { 0x5319, 0x18 }, { 0x531a, 0x00 }, { 0x531b, 0x26 },
+ { 0x531c, 0x00 }, { 0x531d, 0xdc }, { 0x531e, 0x00 }, { 0x531f, 0x02 },
+ { 0x5320, 0x00 }, { 0x5321, 0x24 }, { 0x5322, 0x00 }, { 0x5323, 0x56 },
+ { 0x5324, 0x00 }, { 0x5325, 0x85 }, { 0x5326, 0x00 }, { 0x5327, 0x20 },
+ { 0x5609, 0x01 }, { 0x560a, 0x40 }, { 0x560b, 0x01 }, { 0x560c, 0x40 },
+ { 0x560d, 0x00 }, { 0x560e, 0xfa }, { 0x560f, 0x00 }, { 0x5610, 0xfa },
+ { 0x5611, 0x02 }, { 0x5612, 0x80 }, { 0x5613, 0x02 }, { 0x5614, 0x80 },
+ { 0x5615, 0x01 }, { 0x5616, 0x2c }, { 0x5617, 0x01 }, { 0x5618, 0x2c },
+ { 0x563b, 0x01 }, { 0x563c, 0x01 }, { 0x563d, 0x01 }, { 0x563e, 0x01 },
+ { 0x563f, 0x03 }, { 0x5640, 0x03 }, { 0x5641, 0x03 }, { 0x5642, 0x05 },
+ { 0x5643, 0x09 }, { 0x5644, 0x05 }, { 0x5645, 0x05 }, { 0x5646, 0x05 },
+ { 0x5647, 0x05 }, { 0x5651, 0x00 }, { 0x5652, 0x80 }, { 0x521a, 0x01 },
+ { 0x521b, 0x03 }, { 0x521c, 0x06 }, { 0x521d, 0x0a }, { 0x521e, 0x0e },
+ { 0x521f, 0x12 }, { 0x5220, 0x16 }, { 0x5223, 0x02 }, { 0x5225, 0x04 },
+ { 0x5227, 0x08 }, { 0x5229, 0x0c }, { 0x522b, 0x12 }, { 0x522d, 0x18 },
+ { 0x522f, 0x1e }, { 0x5241, 0x04 }, { 0x5242, 0x01 }, { 0x5243, 0x03 },
+ { 0x5244, 0x06 }, { 0x5245, 0x0a }, { 0x5246, 0x0e }, { 0x5247, 0x12 },
+ { 0x5248, 0x16 }, { 0x524a, 0x03 }, { 0x524c, 0x04 }, { 0x524e, 0x08 },
+ { 0x5250, 0x0c }, { 0x5252, 0x12 }, { 0x5254, 0x18 }, { 0x5256, 0x1e },
+ /* fifo_line_length = 2*hts */
+ { 0x4606, (2 * OV10635_HTS) >> 8 }, { 0x4607, (2 * OV10635_HTS) & 0xff },
+ /* fifo_hsync_start = 2*(hts - xres) */
+ { 0x460a, (2 * (OV10635_HTS - OV10635_WIDTH)) >> 8 },
+ { 0x460b, (2 * (OV10635_HTS - OV10635_WIDTH)) & 0xff },
+ { 0x460c, 0x00 }, { 0x4620, 0x0e },
+ /* BT601: 0x08 is also acceptable as HS/VS mode */
+ { 0x4700, 0x04 }, { 0x4701, 0x00 }, { 0x4702, 0x01 }, { 0x4004, 0x04 },
+ { 0x4005, 0x18 }, { 0x4001, 0x06 }, { 0x4050, 0x22 }, { 0x4051, 0x24 },
+ { 0x4052, 0x02 }, { 0x4057, 0x9c }, { 0x405a, 0x00 }, { 0x4202, 0x02 },
+ { 0x3023, 0x10 }, { 0x0100, 0x01 }, { 0x0100, 0x01 }, { 0x6f10, 0x07 },
+ { 0x6f11, 0x82 }, { 0x6f12, 0x04 }, { 0x6f13, 0x00 }, { 0xd000, 0x19 },
+ { 0xd001, 0xa0 }, { 0xd002, 0x00 }, { 0xd003, 0x01 }, { 0xd004, 0xa9 },
+ { 0xd005, 0xad }, { 0xd006, 0x10 }, { 0xd007, 0x40 }, { 0xd008, 0x44 },
+ { 0xd009, 0x00 }, { 0xd00a, 0x68 }, { 0xd00b, 0x00 }, { 0xd00c, 0x15 },
+ { 0xd00d, 0x00 }, { 0xd00e, 0x00 }, { 0xd00f, 0x00 }, { 0xd040, 0x9c },
+ { 0xd041, 0x21 }, { 0xd042, 0xff }, { 0xd043, 0xf8 }, { 0xd044, 0xd4 },
+ { 0xd045, 0x01 }, { 0xd046, 0x48 }, { 0xd047, 0x00 }, { 0xd048, 0xd4 },
+ { 0xd049, 0x01 }, { 0xd04a, 0x50 }, { 0xd04b, 0x04 }, { 0xd04c, 0x18 },
+ { 0xd04d, 0x60 }, { 0xd04e, 0x00 }, { 0xd04f, 0x01 }, { 0xd050, 0xa8 },
+ { 0xd051, 0x63 }, { 0xd052, 0x02 }, { 0xd053, 0xa4 }, { 0xd054, 0x85 },
+ { 0xd055, 0x43 }, { 0xd056, 0x00 }, { 0xd057, 0x00 }, { 0xd058, 0x18 },
+ { 0xd059, 0x60 }, { 0xd05a, 0x00 }, { 0xd05b, 0x01 }, { 0xd05c, 0xa8 },
+ { 0xd05d, 0x63 }, { 0xd05e, 0x03 }, { 0xd05f, 0xf0 }, { 0xd060, 0x98 },
+ { 0xd061, 0xa3 }, { 0xd062, 0x00 }, { 0xd063, 0x00 }, { 0xd064, 0x8c },
+ { 0xd065, 0x6a }, { 0xd066, 0x00 }, { 0xd067, 0x6e }, { 0xd068, 0xe5 },
+ { 0xd069, 0x85 }, { 0xd06a, 0x18 }, { 0xd06b, 0x00 }, { 0xd06c, 0x10 },
+ { 0xd06d, 0x00 }, { 0xd06e, 0x00 }, { 0xd06f, 0x10 }, { 0xd070, 0x9c },
+ { 0xd071, 0x80 }, { 0xd072, 0x00 }, { 0xd073, 0x03 }, { 0xd074, 0x18 },
+ { 0xd075, 0x60 }, { 0xd076, 0x00 }, { 0xd077, 0x01 }, { 0xd078, 0xa8 },
+ { 0xd079, 0x63 }, { 0xd07a, 0x07 }, { 0xd07b, 0x80 }, { 0xd07c, 0x07 },
+ { 0xd07d, 0xff }, { 0xd07e, 0xf9 }, { 0xd07f, 0x03 }, { 0xd080, 0x8c },
+ { 0xd081, 0x63 }, { 0xd082, 0x00 }, { 0xd083, 0x00 }, { 0xd084, 0xa5 },
+ { 0xd085, 0x6b }, { 0xd086, 0x00 }, { 0xd087, 0xff }, { 0xd088, 0x18 },
+ { 0xd089, 0x80 }, { 0xd08a, 0x00 }, { 0xd08b, 0x01 }, { 0xd08c, 0xa8 },
+ { 0xd08d, 0x84 }, { 0xd08e, 0x01 }, { 0xd08f, 0x04 }, { 0xd090, 0xe1 },
+ { 0xd091, 0x6b }, { 0xd092, 0x58 }, { 0xd093, 0x00 }, { 0xd094, 0x94 },
+ { 0xd095, 0x6a }, { 0xd096, 0x00 }, { 0xd097, 0x70 }, { 0xd098, 0xe1 },
+ { 0xd099, 0x6b }, { 0xd09a, 0x20 }, { 0xd09b, 0x00 }, { 0xd09c, 0x95 },
+ { 0xd09d, 0x6b }, { 0xd09e, 0x00 }, { 0xd09f, 0x00 }, { 0xd0a0, 0xe4 },
+ { 0xd0a1, 0x8b }, { 0xd0a2, 0x18 }, { 0xd0a3, 0x00 }, { 0xd0a4, 0x0c },
+ { 0xd0a5, 0x00 }, { 0xd0a6, 0x00 }, { 0xd0a7, 0x23 }, { 0xd0a8, 0x15 },
+ { 0xd0a9, 0x00 }, { 0xd0aa, 0x00 }, { 0xd0ab, 0x00 }, { 0xd0ac, 0x18 },
+ { 0xd0ad, 0x60 }, { 0xd0ae, 0x80 }, { 0xd0af, 0x06 }, { 0xd0b0, 0xa8 },
+ { 0xd0b1, 0x83 }, { 0xd0b2, 0x40 }, { 0xd0b3, 0x08 }, { 0xd0b4, 0xa8 },
+ { 0xd0b5, 0xe3 }, { 0xd0b6, 0x38 }, { 0xd0b7, 0x2a }, { 0xd0b8, 0xa8 },
+ { 0xd0b9, 0xc3 }, { 0xd0ba, 0x40 }, { 0xd0bb, 0x09 }, { 0xd0bc, 0xa8 },
+ { 0xd0bd, 0xa3 }, { 0xd0be, 0x38 }, { 0xd0bf, 0x29 }, { 0xd0c0, 0x8c },
+ { 0xd0c1, 0x65 }, { 0xd0c2, 0x00 }, { 0xd0c3, 0x00 }, { 0xd0c4, 0xd8 },
+ { 0xd0c5, 0x04 }, { 0xd0c6, 0x18 }, { 0xd0c7, 0x00 }, { 0xd0c8, 0x8c },
+ { 0xd0c9, 0x67 }, { 0xd0ca, 0x00 }, { 0xd0cb, 0x00 }, { 0xd0cc, 0xd8 },
+ { 0xd0cd, 0x06 }, { 0xd0ce, 0x18 }, { 0xd0cf, 0x00 }, { 0xd0d0, 0x18 },
+ { 0xd0d1, 0x60 }, { 0xd0d2, 0x80 }, { 0xd0d3, 0x06 }, { 0xd0d4, 0xa8 },
+ { 0xd0d5, 0xe3 }, { 0xd0d6, 0x67 }, { 0xd0d7, 0x02 }, { 0xd0d8, 0xa9 },
+ { 0xd0d9, 0x03 }, { 0xd0da, 0x67 }, { 0xd0db, 0x03 }, { 0xd0dc, 0xa8 },
+ { 0xd0dd, 0xc3 }, { 0xd0de, 0x3d }, { 0xd0df, 0x05 }, { 0xd0e0, 0x8c },
+ { 0xd0e1, 0x66 }, { 0xd0e2, 0x00 }, { 0xd0e3, 0x00 }, { 0xd0e4, 0xb8 },
+ { 0xd0e5, 0x63 }, { 0xd0e6, 0x00 }, { 0xd0e7, 0x18 }, { 0xd0e8, 0xb8 },
+ { 0xd0e9, 0x63 }, { 0xd0ea, 0x00 }, { 0xd0eb, 0x98 }, { 0xd0ec, 0xbc },
+ { 0xd0ed, 0x03 }, { 0xd0ee, 0x00 }, { 0xd0ef, 0x00 }, { 0xd0f0, 0x10 },
+ { 0xd0f1, 0x00 }, { 0xd0f2, 0x00 }, { 0xd0f3, 0x16 }, { 0xd0f4, 0xb8 },
+ { 0xd0f5, 0x83 }, { 0xd0f6, 0x00 }, { 0xd0f7, 0x19 }, { 0xd0f8, 0x8c },
+ { 0xd0f9, 0x67 }, { 0xd0fa, 0x00 }, { 0xd0fb, 0x00 }, { 0xd0fc, 0xb8 },
+ { 0xd0fd, 0xa4 }, { 0xd0fe, 0x00 }, { 0xd0ff, 0x98 }, { 0xd100, 0xb8 },
+ { 0xd101, 0x83 }, { 0xd102, 0x00 }, { 0xd103, 0x08 }, { 0xd104, 0x8c },
+ { 0xd105, 0x68 }, { 0xd106, 0x00 }, { 0xd107, 0x00 }, { 0xd108, 0xe0 },
+ { 0xd109, 0x63 }, { 0xd10a, 0x20 }, { 0xd10b, 0x04 }, { 0xd10c, 0xe0 },
+ { 0xd10d, 0x65 }, { 0xd10e, 0x18 }, { 0xd10f, 0x00 }, { 0xd110, 0xa4 },
+ { 0xd111, 0x83 }, { 0xd112, 0xff }, { 0xd113, 0xff }, { 0xd114, 0xb8 },
+ { 0xd115, 0x64 }, { 0xd116, 0x00 }, { 0xd117, 0x48 }, { 0xd118, 0xd8 },
+ { 0xd119, 0x07 }, { 0xd11a, 0x18 }, { 0xd11b, 0x00 }, { 0xd11c, 0xd8 },
+ { 0xd11d, 0x08 }, { 0xd11e, 0x20 }, { 0xd11f, 0x00 }, { 0xd120, 0x9c },
+ { 0xd121, 0x60 }, { 0xd122, 0x00 }, { 0xd123, 0x00 }, { 0xd124, 0xd8 },
+ { 0xd125, 0x06 }, { 0xd126, 0x18 }, { 0xd127, 0x00 }, { 0xd128, 0x00 },
+ { 0xd129, 0x00 }, { 0xd12a, 0x00 }, { 0xd12b, 0x08 }, { 0xd12c, 0x15 },
+ { 0xd12d, 0x00 }, { 0xd12e, 0x00 }, { 0xd12f, 0x00 }, { 0xd130, 0x8c },
+ { 0xd131, 0x6a }, { 0xd132, 0x00 }, { 0xd133, 0x76 }, { 0xd134, 0xbc },
+ { 0xd135, 0x23 }, { 0xd136, 0x00 }, { 0xd137, 0x00 }, { 0xd138, 0x13 },
+ { 0xd139, 0xff }, { 0xd13a, 0xff }, { 0xd13b, 0xe6 }, { 0xd13c, 0x18 },
+ { 0xd13d, 0x60 }, { 0xd13e, 0x80 }, { 0xd13f, 0x06 }, { 0xd140, 0x03 },
+ { 0xd141, 0xff }, { 0xd142, 0xff }, { 0xd143, 0xdd }, { 0xd144, 0xa8 },
+ { 0xd145, 0x83 }, { 0xd146, 0x40 }, { 0xd147, 0x08 }, { 0xd148, 0x85 },
+ { 0xd149, 0x21 }, { 0xd14a, 0x00 }, { 0xd14b, 0x00 }, { 0xd14c, 0x85 },
+ { 0xd14d, 0x41 }, { 0xd14e, 0x00 }, { 0xd14f, 0x04 }, { 0xd150, 0x44 },
+ { 0xd151, 0x00 }, { 0xd152, 0x48 }, { 0xd153, 0x00 }, { 0xd154, 0x9c },
+ { 0xd155, 0x21 }, { 0xd156, 0x00 }, { 0xd157, 0x08 }, { 0x6f0e, 0x03 },
+ { 0x6f0f, 0x00 }, { 0x460e, 0x08 }, { 0x460f, 0x01 }, { 0x4610, 0x00 },
+ { 0x4611, 0x01 }, { 0x4612, 0x00 }, { 0x4613, 0x01 },
+ /* 8 bits */
+ { 0x4605, 0x08 },
+ /* Swap data bits order [9:0] -> [0:9] */
+ { 0x4709, 0x10 }, { 0x4608, 0x00 }, { 0x4609, 0x08 }, { 0x6804, 0x00 },
+ { 0x6805, 0x06 }, { 0x6806, 0x00 }, { 0x5120, 0x00 }, { 0x3510, 0x00 },
+ { 0x3504, 0x00 }, { 0x6800, 0x00 }, { 0x6f0d, 0x01 },
+ /* PCLK falling edge */
+ { 0x4708, 0x01 }, { 0x5000, 0xff }, { 0x5001, 0xbf }, { 0x5002, 0x7e },
+ { 0x503d, 0x00 }, { 0xc450, 0x01 }, { 0xc452, 0x04 }, { 0xc453, 0x00 },
+ { 0xc454, 0x00 }, { 0xc455, 0x01 }, { 0xc456, 0x01 }, { 0xc457, 0x00 },
+ { 0xc458, 0x00 }, { 0xc459, 0x00 }, { 0xc45b, 0x00 }, { 0xc45c, 0x01 },
+ { 0xc45d, 0x00 }, { 0xc45e, 0x00 }, { 0xc45f, 0x00 }, { 0xc460, 0x00 },
+ { 0xc461, 0x01 }, { 0xc462, 0x01 }, { 0xc464, 0x03 }, { 0xc465, 0x00 },
+ { 0xc466, 0x8a }, { 0xc467, 0x00 }, { 0xc468, 0x86 }, { 0xc469, 0x00 },
+ { 0xc46a, 0x40 }, { 0xc46b, 0x50 }, { 0xc46c, 0x30 }, { 0xc46d, 0x28 },
+ { 0xc46e, 0x60 }, { 0xc46f, 0x40 }, { 0xc47c, 0x01 }, { 0xc47d, 0x38 },
+ { 0xc47e, 0x00 }, { 0xc47f, 0x00 }, { 0xc480, 0x00 }, { 0xc481, 0xff },
+ { 0xc482, 0x00 }, { 0xc483, 0x40 }, { 0xc484, 0x00 }, { 0xc485, 0x18 },
+ { 0xc486, 0x00 }, { 0xc487, 0x18 },
+ { 0xc488, (OV10635_VTS - 8) * 16 >> 8},
+ { 0xc489, (OV10635_VTS - 8) * 16 & 0xff},
+ { 0xc48a, (OV10635_VTS - 8) * 16 >> 8},
+ { 0xc48b, (OV10635_VTS - 8) * 16 & 0xff}, { 0xc48c, 0x00 },
+ { 0xc48d, 0x04 }, { 0xc48e, 0x00 }, { 0xc48f, 0x04 }, { 0xc490, 0x03 },
+ { 0xc492, 0x20 }, { 0xc493, 0x08 }, { 0xc498, 0x02 }, { 0xc499, 0x00 },
+ { 0xc49a, 0x02 }, { 0xc49b, 0x00 }, { 0xc49c, 0x02 }, { 0xc49d, 0x00 },
+ { 0xc49e, 0x02 }, { 0xc49f, 0x60 }, { 0xc4a0, 0x03 }, { 0xc4a1, 0x00 },
+ { 0xc4a2, 0x04 }, { 0xc4a3, 0x00 }, { 0xc4a4, 0x00 }, { 0xc4a5, 0x10 },
+ { 0xc4a6, 0x00 }, { 0xc4a7, 0x40 }, { 0xc4a8, 0x00 }, { 0xc4a9, 0x80 },
+ { 0xc4aa, 0x0d }, { 0xc4ab, 0x00 }, { 0xc4ac, 0x0f }, { 0xc4ad, 0xc0 },
+ { 0xc4b4, 0x01 }, { 0xc4b5, 0x01 }, { 0xc4b6, 0x00 }, { 0xc4b7, 0x01 },
+ { 0xc4b8, 0x00 }, { 0xc4b9, 0x01 }, { 0xc4ba, 0x01 }, { 0xc4bb, 0x00 },
+ { 0xc4bc, 0x01 }, { 0xc4bd, 0x60 }, { 0xc4be, 0x02 }, { 0xc4bf, 0x33 },
+ { 0xc4c8, 0x03 }, { 0xc4c9, 0xd0 }, { 0xc4ca, 0x0e }, { 0xc4cb, 0x00 },
+ { 0xc4cc, 0x0e }, { 0xc4cd, 0x51 }, { 0xc4ce, 0x0e }, { 0xc4cf, 0x51 },
+ { 0xc4d0, 0x04 }, { 0xc4d1, 0x80 }, { 0xc4e0, 0x04 }, { 0xc4e1, 0x02 },
+ { 0xc4e2, 0x01 }, { 0xc4e4, 0x10 }, { 0xc4e5, 0x20 }, { 0xc4e6, 0x30 },
+ { 0xc4e7, 0x40 }, { 0xc4e8, 0x50 }, { 0xc4e9, 0x60 }, { 0xc4ea, 0x70 },
+ { 0xc4eb, 0x80 }, { 0xc4ec, 0x90 }, { 0xc4ed, 0xa0 }, { 0xc4ee, 0xb0 },
+ { 0xc4ef, 0xc0 }, { 0xc4f0, 0xd0 }, { 0xc4f1, 0xe0 }, { 0xc4f2, 0xf0 },
+ { 0xc4f3, 0x80 }, { 0xc4f4, 0x00 }, { 0xc4f5, 0x20 }, { 0xc4f6, 0x02 },
+ { 0xc4f7, 0x00 }, { 0xc4f8, 0x00 }, { 0xc4f9, 0x00 }, { 0xc4fa, 0x00 },
+ { 0xc4fb, 0x01 }, { 0xc4fc, 0x01 }, { 0xc4fd, 0x00 }, { 0xc4fe, 0x04 },
+ { 0xc4ff, 0x02 }, { 0xc500, 0x48 }, { 0xc501, 0x74 }, { 0xc502, 0x58 },
+ { 0xc503, 0x80 }, { 0xc504, 0x05 }, { 0xc505, 0x80 }, { 0xc506, 0x03 },
+ { 0xc507, 0x80 }, { 0xc508, 0x01 }, { 0xc509, 0xc0 }, { 0xc50a, 0x01 },
+ { 0xc50b, 0xa0 }, { 0xc50c, 0x01 }, { 0xc50d, 0x2c }, { 0xc50e, 0x01 },
+ { 0xc50f, 0x0a }, { 0xc510, 0x00 }, { 0xc511, 0x00 }, { 0xc512, 0xe5 },
+ { 0xc513, 0x14 }, { 0xc514, 0x04 }, { 0xc515, 0x00 }, { 0xc518, OV10635_VTS >> 8},
+ { 0xc519, OV10635_VTS & 0xff}, { 0xc51a, OV10635_HTS >> 8},
+ { 0xc51b, OV10635_HTS & 0xff}, { 0xc2e0, 0x00 }, { 0xc2e1, 0x51 },
+ { 0xc2e2, 0x00 }, { 0xc2e3, 0xd6 }, { 0xc2e4, 0x01 }, { 0xc2e5, 0x5e },
+ { 0xc2e9, 0x01 }, { 0xc2ea, 0x7a }, { 0xc2eb, 0x90 }, { 0xc2ed, 0x00 },
+ { 0xc2ee, 0x7a }, { 0xc2ef, 0x64 }, { 0xc308, 0x00 }, { 0xc309, 0x00 },
+ { 0xc30a, 0x00 }, { 0xc30c, 0x00 }, { 0xc30d, 0x01 }, { 0xc30e, 0x00 },
+ { 0xc30f, 0x00 }, { 0xc310, 0x01 }, { 0xc311, 0x60 }, { 0xc312, 0xff },
+ { 0xc313, 0x08 }, { 0xc314, 0x01 }, { 0xc315, 0x00 }, { 0xc316, 0xff },
+ { 0xc317, 0x0b }, { 0xc318, 0x00 }, { 0xc319, 0x0c }, { 0xc31a, 0x00 },
+ { 0xc31b, 0xe0 }, { 0xc31c, 0x00 }, { 0xc31d, 0x14 }, { 0xc31e, 0x00 },
+ { 0xc31f, 0xc5 }, { 0xc320, 0xff }, { 0xc321, 0x4b }, { 0xc322, 0xff },
+ { 0xc323, 0xf0 }, { 0xc324, 0xff }, { 0xc325, 0xe8 }, { 0xc326, 0x00 },
+ { 0xc327, 0x46 }, { 0xc328, 0xff }, { 0xc329, 0xd2 }, { 0xc32a, 0xff },
+ { 0xc32b, 0xe4 }, { 0xc32c, 0xff }, { 0xc32d, 0xbb }, { 0xc32e, 0x00 },
+ { 0xc32f, 0x61 }, { 0xc330, 0xff }, { 0xc331, 0xf9 }, { 0xc332, 0x00 },
+ { 0xc333, 0xd9 }, { 0xc334, 0x00 }, { 0xc335, 0x2e }, { 0xc336, 0x00 },
+ { 0xc337, 0xb1 }, { 0xc338, 0xff }, { 0xc339, 0x64 }, { 0xc33a, 0xff },
+ { 0xc33b, 0xeb }, { 0xc33c, 0xff }, { 0xc33d, 0xe8 }, { 0xc33e, 0x00 },
+ { 0xc33f, 0x48 }, { 0xc340, 0xff }, { 0xc341, 0xd0 }, { 0xc342, 0xff },
+ { 0xc343, 0xed }, { 0xc344, 0xff }, { 0xc345, 0xad }, { 0xc346, 0x00 },
+ { 0xc347, 0x66 }, { 0xc348, 0x01 }, { 0xc349, 0x00 }, { 0x6700, 0x04 },
+ { 0x6701, 0x7b }, { 0x6702, 0xfd }, { 0x6703, 0xf9 }, { 0x6704, 0x3d },
+ { 0x6705, 0x71 }, { 0x6706, 0x78 }, { 0x6708, 0x05 }, { 0x6f06, 0x6f },
+ { 0x6f07, 0x00 }, { 0x6f0a, 0x6f }, { 0x6f0b, 0x00 }, { 0x6f00, 0x03 },
+ { 0xc34c, 0x01 }, { 0xc34d, 0x00 }, { 0xc34e, 0x46 }, { 0xc34f, 0x55 },
+ { 0xc350, 0x00 }, { 0xc351, 0x40 }, { 0xc352, 0x00 }, { 0xc353, 0xff },
+ { 0xc354, 0x04 }, { 0xc355, 0x08 }, { 0xc356, 0x01 }, { 0xc357, 0xef },
+ { 0xc358, 0x30 }, { 0xc359, 0x01 }, { 0xc35a, 0x64 }, { 0xc35b, 0x46 },
+ { 0xc35c, 0x00 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
+ { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
+ { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
+ { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
+ { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
+ { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 },
+ { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0x3042, 0xf0 }, { 0xc261, 0x01 },
+ { 0x301b, 0xf0 }, { 0x301c, 0xf0 }, { 0x301a, 0xf0 }, { 0x6f00, 0xc3 },
+ { 0xc46a, 0x30 }, { 0xc46d, 0x20 }, { 0xc464, 0x84 }, { 0xc465, 0x00 },
+ { 0x6f00, 0x03 }, { 0x6f00, 0x43 }, { 0x381c, 0x00 }, { 0x381d, 0x40 },
+ { 0xc454, 0x01 }, { 0x6f00, 0xc3 }, { 0xc454, 0x00 }, { 0xc4b1, 0x02 },
+ { 0xc4b2, 0x01 }, { 0xc4b3, 0x03 }, { 0x6f00, 0x03 }, { 0x6f00, 0x43 },
+ /* enable FSIN (FRAMESYNC input) functionality */
+ { 0x3832, (0x0d + 2 * 0x20 + 0x15 + 38) >> 8 },
+ { 0x3833, (0x0d + 2 * 0x20 + 0x15 + 38) & 0xff },
+ { 0x3834, OV10635_VTS >> 8 }, { 0x3835, OV10635_VTS & 0xff },
+ { 0x302e, 0x01 },
+};
+
+struct rdacm20_device {
+ struct device *dev;
+ struct max9271_device *serializer;
+ struct i2c_client *sensor;
+ struct v4l2_subdev sd;
+ struct media_pad pad;
+ struct v4l2_ctrl_handler ctrls;
+ u32 addrs[2];
+};
+
+static inline struct rdacm20_device *sd_to_rdacm20(struct v4l2_subdev *sd)
+{
+ return container_of(sd, struct rdacm20_device, sd);
+}
+
+static inline struct rdacm20_device *i2c_to_rdacm20(struct i2c_client *client)
+{
+ return sd_to_rdacm20(i2c_get_clientdata(client));
+}
+
+static int ov10635_read16(struct rdacm20_device *dev, u16 reg)
+{
+ u8 buf[2] = { reg >> 8, reg & 0xff };
+ int ret;
+
+ ret = i2c_master_send(dev->sensor, buf, 2);
+ if (ret != 2) {
+ dev_dbg(dev->dev, "%s: register 0x%04x write failed (%d)\n",
+ __func__, reg, ret);
+ return ret;
+ }
+
+ ret = i2c_master_recv(dev->sensor, buf, 2);
+ if (ret < 0) {
+ dev_dbg(dev->dev, "%s: register 0x%04x read failed (%d)\n",
+ __func__, reg, ret);
+ return ret;
+ }
+
+ return (buf[0] << 8) | buf[1];
+}
+
+static int __ov10635_write(struct rdacm20_device *dev, u16 reg, u8 val)
+{
+ u8 buf[3] = { reg >> 8, reg & 0xff, val };
+ int ret;
+
+ dev_dbg(dev->dev, "%s(0x%04x, 0x%02x)\n", __func__, reg, val);
+
+ ret = i2c_master_send(dev->sensor, buf, 3);
+ return ret < 0 ? ret : 0;
+}
+
+static int ov10635_write(struct rdacm20_device *dev, u16 reg, u8 val)
+{
+ int ret;
+
+ ret = __ov10635_write(dev, reg, val);
+ if (ret < 0)
+ dev_err(dev->dev, "%s: register 0x%04x write failed (%d)\n",
+ __func__, reg, ret);
+
+ return ret;
+}
+
+static int ov10635_set_regs(struct rdacm20_device *dev,
+ const struct ov10635_reg *regs,
+ unsigned int nr_regs)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < nr_regs; i++) {
+ ret = __ov10635_write(dev, regs[i].reg, regs[i].val);
+ if (ret) {
+ dev_err(dev->dev,
+ "%s: register %u (0x%04x) write failed (%d)\n",
+ __func__, i, regs[i].reg, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int rdacm20_s_stream(struct v4l2_subdev *sd, int enable)
+{
+ struct rdacm20_device *dev = sd_to_rdacm20(sd);
+
+ return max9271_set_serial_link(dev->serializer, enable);
+}
+
+static int rdacm20_enum_mbus_code(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_mbus_code_enum *code)
+{
+ if (code->pad || code->index > 0)
+ return -EINVAL;
+
+ code->code = MEDIA_BUS_FMT_UYVY8_2X8;
+
+ return 0;
+}
+
+static int rdacm20_get_fmt(struct v4l2_subdev *sd,
+ struct v4l2_subdev_pad_config *cfg,
+ struct v4l2_subdev_format *format)
+{
+ struct v4l2_mbus_framefmt *mf = &format->format;
+
+ if (format->pad)
+ return -EINVAL;
+
+ mf->width = OV10635_WIDTH;
+ mf->height = OV10635_HEIGHT;
+ mf->code = MEDIA_BUS_FMT_UYVY8_2X8;
+ mf->colorspace = V4L2_COLORSPACE_RAW;
+ mf->field = V4L2_FIELD_NONE;
+ mf->ycbcr_enc = V4L2_YCBCR_ENC_601;
+ mf->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+ mf->xfer_func = V4L2_XFER_FUNC_NONE;
+
+ return 0;
+}
+
+static struct v4l2_subdev_video_ops rdacm20_video_ops = {
+ .s_stream = rdacm20_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops rdacm20_subdev_pad_ops = {
+ .enum_mbus_code = rdacm20_enum_mbus_code,
+ .get_fmt = rdacm20_get_fmt,
+ .set_fmt = rdacm20_get_fmt,
+};
+
+static struct v4l2_subdev_ops rdacm20_subdev_ops = {
+ .video = &rdacm20_video_ops,
+ .pad = &rdacm20_subdev_pad_ops,
+};
+
+static int rdacm20_initialize(struct rdacm20_device *dev)
+{
+ unsigned int retry = 3;
+ int ret;
+
+ /* Verify communication with the MAX9271: ping to wakeup. */
+ dev->serializer->client->addr = MAX9271_DEFAULT_ADDR;
+ i2c_smbus_read_byte(dev->serializer->client);
+
+ /* Serial link disabled during config as it needs a valid pixel clock. */
+ ret = max9271_set_serial_link(dev->serializer, false);
+ if (ret)
+ return ret;
+
+ /*
+ * Ensure that we have a good link configuration before attempting to
+ * identify the device.
+ */
+ max9271_configure_i2c(dev->serializer, MAX9271_I2CSLVSH_469NS_234NS |
+ MAX9271_I2CSLVTO_1024US |
+ MAX9271_I2CMSTBT_105KBPS);
+
+ max9271_configure_gmsl_link(dev->serializer);
+
+ ret = max9271_verify_id(dev->serializer);
+ if (ret < 0)
+ return ret;
+
+ ret = max9271_set_address(dev->serializer, dev->addrs[0]);
+ if (ret < 0)
+ return ret;
+ dev->serializer->client->addr = dev->addrs[0];
+
+ /*
+ * Reset the sensor by cycling the OV10635 reset signal connected to the
+ * MAX9271 GPIO1 and verify communication with the OV10635.
+ */
+ max9271_clear_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ mdelay(10);
+ max9271_set_gpios(dev->serializer, MAX9271_GPIO1OUT);
+ mdelay(10);
+
+again:
+ ret = ov10635_read16(dev, OV10635_PID);
+ if (ret < 0) {
+ if (retry--)
+ goto again;
+
+ dev_err(dev->dev, "OV10635 ID read failed (%d)\n",
+ ret);
+ return -ENXIO;
+ }
+
+ if (ret != OV10635_VERSION) {
+ if (retry--)
+ goto again;
+
+ dev_err(dev->dev, "OV10635 ID mismatch (0x%04x)\n",
+ ret);
+ return -ENXIO;
+ }
+
+ /* Change the sensor I2C address. */
+ ret = ov10635_write(dev, OV10635_SC_CMMN_SCCB_ID,
+ (dev->addrs[1] << 1) |
+ OV10635_SC_CMMN_SCCB_ID_SELECT);
+ if (ret < 0) {
+ dev_err(dev->dev,
+ "OV10635 I2C address change failed (%d)\n", ret);
+ return ret;
+ }
+ dev->sensor->addr = dev->addrs[1];
+ usleep_range(3500, 5000);
+
+ /* Program the 0V10635 initial configuration. */
+ ret = ov10635_set_regs(dev, ov10635_regs_wizard,
+ ARRAY_SIZE(ov10635_regs_wizard));
+ if (ret)
+ return ret;
+
+ dev_info(dev->dev, "Identified MAX9271 + OV10635 device\n");
+
+ return 0;
+}
+
+static int rdacm20_probe(struct i2c_client *client)
+{
+ struct rdacm20_device *dev;
+ struct fwnode_handle *ep;
+ int ret;
+
+ dev = devm_kzalloc(&client->dev, sizeof(*dev), GFP_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ dev->dev = &client->dev;
+
+ dev->serializer = devm_kzalloc(&client->dev, sizeof(*dev->serializer),
+ GFP_KERNEL);
+ if (!dev->serializer)
+ return -ENOMEM;
+
+ dev->serializer->client = client;
+
+ ret = of_property_read_u32_array(client->dev.of_node, "reg",
+ dev->addrs, 2);
+ if (ret < 0) {
+ dev_err(dev->dev, "Invalid DT reg property: %d\n", ret);
+ return -EINVAL;
+ }
+
+ /* Create the dummy I2C client for the sensor. */
+ dev->sensor = i2c_new_dummy_device(client->adapter,
+ OV10635_I2C_ADDRESS);
+ if (IS_ERR(dev->sensor)) {
+ ret = PTR_ERR(dev->sensor);
+ goto error;
+ }
+
+ /* Initialize the hardware. */
+ ret = rdacm20_initialize(dev);
+ if (ret < 0)
+ goto error;
+
+ /* Initialize and register the subdevice. */
+ v4l2_i2c_subdev_init(&dev->sd, client, &rdacm20_subdev_ops);
+ dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+
+ v4l2_ctrl_handler_init(&dev->ctrls, 1);
+ v4l2_ctrl_new_std(&dev->ctrls, NULL, V4L2_CID_PIXEL_RATE,
+ OV10635_PIXEL_RATE, OV10635_PIXEL_RATE, 1,
+ OV10635_PIXEL_RATE);
+ dev->sd.ctrl_handler = &dev->ctrls;
+
+ ret = dev->ctrls.error;
+ if (ret)
+ goto error_free_ctrls;
+
+ dev->pad.flags = MEDIA_PAD_FL_SOURCE;
+ dev->sd.entity.flags |= MEDIA_ENT_F_CAM_SENSOR;
+ ret = media_entity_pads_init(&dev->sd.entity, 1, &dev->pad);
+ if (ret < 0)
+ goto error_free_ctrls;
+
+ ep = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
+ if (!ep) {
+ dev_err(&client->dev,
+ "Unable to get endpoint in node %pOF\n",
+ client->dev.of_node);
+ ret = -ENOENT;
+ goto error_free_ctrls;
+ }
+ dev->sd.fwnode = ep;
+
+ ret = v4l2_async_register_subdev(&dev->sd);
+ if (ret)
+ goto error_put_node;
+
+ return 0;
+
+error_put_node:
+ fwnode_handle_put(ep);
+error_free_ctrls:
+ v4l2_ctrl_handler_free(&dev->ctrls);
+error:
+ media_entity_cleanup(&dev->sd.entity);
+ if (dev->sensor)
+ i2c_unregister_device(dev->sensor);
+
+ dev_err(&client->dev, "probe failed\n");
+
+ return ret;
+}
+
+static int rdacm20_remove(struct i2c_client *client)
+{
+ struct rdacm20_device *dev = i2c_to_rdacm20(client);
+
+ fwnode_handle_put(dev->sd.fwnode);
+ v4l2_async_unregister_subdev(&dev->sd);
+ v4l2_ctrl_handler_free(&dev->ctrls);
+ media_entity_cleanup(&dev->sd.entity);
+ i2c_unregister_device(dev->sensor);
+
+ return 0;
+}
+
+static void rdacm20_shutdown(struct i2c_client *client)
+{
+ struct rdacm20_device *dev = i2c_to_rdacm20(client);
+
+ /* make sure stream off during shutdown (reset/reboot) */
+ rdacm20_s_stream(&dev->sd, 0);
+}
+
+static const struct of_device_id rdacm20_of_ids[] = {
+ { .compatible = "imi,rdacm20", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, rdacm20_of_ids);
+
+static struct i2c_driver rdacm20_i2c_driver = {
+ .driver = {
+ .name = "rdacm20",
+ .of_match_table = rdacm20_of_ids,
+ },
+ .probe_new = rdacm20_probe,
+ .remove = rdacm20_remove,
+ .shutdown = rdacm20_shutdown,
+};
+
+module_i2c_driver(rdacm20_i2c_driver);
+
+MODULE_DESCRIPTION("GMSL Camera driver for RDACM20");
+MODULE_AUTHOR("Vladimir Barinov");
+MODULE_LICENSE("GPL");
--
2.25.1
next prev parent reply other threads:[~2020-05-12 15:51 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-12 15:51 [PATCH v9 0/4] MAX9286 GMSL Support (+RDACM20) Kieran Bingham
2020-05-12 15:51 ` [PATCH v9 1/4] dt-bindings: media: i2c: Add bindings for Maxim Integrated MAX9286 Kieran Bingham
2020-05-12 22:33 ` Rob Herring
2020-05-13 12:54 ` Jacopo Mondi
2020-05-14 9:43 ` [PATCH] fixup! dt-bindings: media: i2c: Add bindings for Maxima Integrated MAX9286 Kieran Bingham
2020-05-14 10:20 ` Jacopo Mondi
2020-05-12 22:36 ` [PATCH v9 1/4] dt-bindings: media: i2c: Add bindings for Maxim " Rob Herring
2020-05-13 12:28 ` Jacopo Mondi
2020-05-12 15:51 ` [PATCH v9 2/4] media: i2c: Add MAX9286 driver Kieran Bingham
2020-05-12 17:40 ` Manivannan Sadhasivam
2020-05-14 9:53 ` Kieran Bingham
2020-05-14 9:59 ` Manivannan Sadhasivam
2020-05-14 10:05 ` Kieran Bingham
2020-05-12 18:17 ` Manivannan Sadhasivam
2020-05-14 10:02 ` Kieran Bingham
2020-05-14 10:13 ` Manivannan Sadhasivam
2020-05-14 11:47 ` Kieran Bingham
2020-05-14 11:59 ` Geert Uytterhoeven
2020-05-14 12:48 ` Manivannan Sadhasivam
2020-05-14 13:50 ` Kieran Bingham
2020-05-14 11:47 ` Kieran Bingham
2020-05-14 12:27 ` Kieran Bingham
2020-05-14 12:54 ` Manivannan Sadhasivam
2020-05-16 21:51 ` Sakari Ailus
2020-05-18 11:45 ` Kieran Bingham
2020-05-18 12:38 ` Jacopo Mondi
2020-05-18 13:09 ` Kieran Bingham
2020-05-18 16:11 ` [PATCH] fixes! [max9286]: Validate link formats Kieran Bingham
2020-05-18 18:44 ` Kieran Bingham
2020-05-19 8:13 ` Sakari Ailus
2020-05-19 7:56 ` Jacopo Mondi
2020-05-19 9:00 ` Kieran Bingham
2020-05-19 8:10 ` [PATCH v9 2/4] media: i2c: Add MAX9286 driver Sakari Ailus
2020-05-19 8:55 ` Kieran Bingham
2020-05-19 9:03 ` Sakari Ailus
2020-05-20 0:50 ` Laurent Pinchart
2020-05-26 8:54 ` Sakari Ailus
2020-05-12 15:51 ` [PATCH v9 3/4] dt-bindings: media: i2c: Add bindings for IMI RDACM2x Kieran Bingham
2020-05-12 15:51 ` Kieran Bingham [this message]
2020-05-16 22:36 ` [PATCH v9 4/4] media: i2c: Add RDACM20 driver Sakari Ailus
2020-05-18 7:35 ` Jacopo Mondi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512155105.1068064-5-kieran.bingham+renesas@ideasonboard.com \
--to=kieran.bingham+renesas@ideasonboard.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil@xs4all.nl \
--cc=hyunk@xilinx.com \
--cc=jacopo+renesas@jmondi.org \
--cc=jacopo@jmondi.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=laurent.pinchart+renesas@ideasonboard.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.