All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Ohad Ben-Cohen <ohad@wizery.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-remoteproc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 3/5] remoteproc: qcom: Update PIL relocation info on load
Date: Tue, 12 May 2020 22:56:39 -0700	[thread overview]
Message-ID: <20200513055641.1413100-4-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20200513055641.1413100-1-bjorn.andersson@linaro.org>

Update the PIL relocation information in IMEM with information about
where the firmware for various remoteprocs are loaded.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

Changes since v4:
- Dropped unnecessary comment about ignoring return value.

 drivers/remoteproc/Kconfig          |  3 +++
 drivers/remoteproc/qcom_q6v5_adsp.c | 16 +++++++++++++---
 drivers/remoteproc/qcom_q6v5_mss.c  |  3 +++
 drivers/remoteproc/qcom_q6v5_pas.c  | 15 ++++++++++++---
 drivers/remoteproc/qcom_q6v5_wcss.c | 14 +++++++++++---
 drivers/remoteproc/qcom_wcnss.c     | 14 +++++++++++---
 6 files changed, 53 insertions(+), 12 deletions(-)

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 8088ca4dd6dc..6bd42a411ca8 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -126,6 +126,7 @@ config QCOM_Q6V5_ADSP
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
+	select QCOM_PIL_INFO
 	select QCOM_MDT_LOADER
 	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
@@ -158,6 +159,7 @@ config QCOM_Q6V5_PAS
 	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select MFD_SYSCON
+	select QCOM_PIL_INFO
 	select QCOM_MDT_LOADER
 	select QCOM_Q6V5_COMMON
 	select QCOM_RPROC_COMMON
@@ -209,6 +211,7 @@ config QCOM_WCNSS_PIL
 	depends on QCOM_SMEM
 	depends on QCOM_SYSMON || QCOM_SYSMON=n
 	select QCOM_MDT_LOADER
+	select QCOM_PIL_INFO
 	select QCOM_RPROC_COMMON
 	select QCOM_SCM
 	help
diff --git a/drivers/remoteproc/qcom_q6v5_adsp.c b/drivers/remoteproc/qcom_q6v5_adsp.c
index d2a2574dcf35..c539e89664cb 100644
--- a/drivers/remoteproc/qcom_q6v5_adsp.c
+++ b/drivers/remoteproc/qcom_q6v5_adsp.c
@@ -26,6 +26,7 @@
 #include <linux/soc/qcom/smem_state.h>
 
 #include "qcom_common.h"
+#include "qcom_pil_info.h"
 #include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
@@ -82,6 +83,7 @@ struct qcom_adsp {
 	unsigned int halt_lpass;
 
 	int crash_reason_smem;
+	const char *info_name;
 
 	struct completion start_done;
 	struct completion stop_done;
@@ -164,10 +166,17 @@ static int qcom_adsp_shutdown(struct qcom_adsp *adsp)
 static int adsp_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+	int ret;
+
+	ret = qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0,
+				    adsp->mem_region, adsp->mem_phys,
+				    adsp->mem_size, &adsp->mem_reloc);
+	if (ret)
+		return ret;
+
+	qcom_pil_info_store(adsp->info_name, adsp->mem_reloc, adsp->mem_size);
 
-	return qcom_mdt_load_no_init(adsp->dev, fw, rproc->firmware, 0,
-			     adsp->mem_region, adsp->mem_phys, adsp->mem_size,
-			     &adsp->mem_reloc);
+	return 0;
 }
 
 static int adsp_start(struct rproc *rproc)
@@ -436,6 +445,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp = (struct qcom_adsp *)rproc->priv;
 	adsp->dev = &pdev->dev;
 	adsp->rproc = rproc;
+	adsp->info_name = desc->sysmon_name;
 	platform_set_drvdata(pdev, adsp);
 
 	ret = adsp_alloc_memory_region(adsp);
diff --git a/drivers/remoteproc/qcom_q6v5_mss.c b/drivers/remoteproc/qcom_q6v5_mss.c
index c4936f4d1e80..fdbcae11ae64 100644
--- a/drivers/remoteproc/qcom_q6v5_mss.c
+++ b/drivers/remoteproc/qcom_q6v5_mss.c
@@ -29,6 +29,7 @@
 
 #include "remoteproc_internal.h"
 #include "qcom_common.h"
+#include "qcom_pil_info.h"
 #include "qcom_q6v5.h"
 
 #include <linux/qcom_scm.h>
@@ -1221,6 +1222,8 @@ static int q6v5_mpss_load(struct q6v5 *qproc)
 	else if (ret < 0)
 		dev_err(qproc->dev, "MPSS authentication failed: %d\n", ret);
 
+	qcom_pil_info_store("modem", mpss_reloc, qproc->mpss_size);
+
 release_firmware:
 	release_firmware(fw);
 out:
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index 3bb69f58e086..84cb19231c35 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -25,6 +25,7 @@
 #include <linux/soc/qcom/smem_state.h>
 
 #include "qcom_common.h"
+#include "qcom_pil_info.h"
 #include "qcom_q6v5.h"
 #include "remoteproc_internal.h"
 
@@ -64,6 +65,7 @@ struct qcom_adsp {
 	int pas_id;
 	int crash_reason_smem;
 	bool has_aggre2_clk;
+	const char *info_name;
 
 	struct completion start_done;
 	struct completion stop_done;
@@ -117,11 +119,17 @@ static void adsp_pds_disable(struct qcom_adsp *adsp, struct device **pds,
 static int adsp_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_adsp *adsp = (struct qcom_adsp *)rproc->priv;
+	int ret;
 
-	return qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
-			     adsp->mem_region, adsp->mem_phys, adsp->mem_size,
-			     &adsp->mem_reloc);
+	ret = qcom_mdt_load(adsp->dev, fw, rproc->firmware, adsp->pas_id,
+			    adsp->mem_region, adsp->mem_phys, adsp->mem_size,
+			    &adsp->mem_reloc);
+	if (ret)
+		return ret;
 
+	qcom_pil_info_store(adsp->info_name, adsp->mem_reloc, adsp->mem_size);
+
+	return 0;
 }
 
 static int adsp_start(struct rproc *rproc)
@@ -405,6 +413,7 @@ static int adsp_probe(struct platform_device *pdev)
 	adsp->rproc = rproc;
 	adsp->pas_id = desc->pas_id;
 	adsp->has_aggre2_clk = desc->has_aggre2_clk;
+	adsp->info_name = desc->sysmon_name;
 	platform_set_drvdata(pdev, adsp);
 
 	ret = adsp_alloc_memory_region(adsp);
diff --git a/drivers/remoteproc/qcom_q6v5_wcss.c b/drivers/remoteproc/qcom_q6v5_wcss.c
index f1924b740a10..962e37a86b8b 100644
--- a/drivers/remoteproc/qcom_q6v5_wcss.c
+++ b/drivers/remoteproc/qcom_q6v5_wcss.c
@@ -421,10 +421,18 @@ static void *q6v5_wcss_da_to_va(struct rproc *rproc, u64 da, size_t len)
 static int q6v5_wcss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct q6v5_wcss *wcss = rproc->priv;
+	int ret;
+
+	ret = qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
+				    0, wcss->mem_region, wcss->mem_phys,
+				    wcss->mem_size, &wcss->mem_reloc);
+	if (ret)
+		return ret;
+
+	/* Failures only affect post mortem debugging, so ignore return value */
+	qcom_pil_info_store("wcnss", wcss->mem_reloc, wcss->mem_size);
 
-	return qcom_mdt_load_no_init(wcss->dev, fw, rproc->firmware,
-				     0, wcss->mem_region, wcss->mem_phys,
-				     wcss->mem_size, &wcss->mem_reloc);
+	return ret;
 }
 
 static const struct rproc_ops q6v5_wcss_ops = {
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 5d65e1a9329a..229482b3231f 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -27,6 +27,7 @@
 
 #include "qcom_common.h"
 #include "remoteproc_internal.h"
+#include "qcom_pil_info.h"
 #include "qcom_wcnss.h"
 
 #define WCNSS_CRASH_REASON_SMEM		422
@@ -145,10 +146,17 @@ void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
+	int ret;
+
+	ret = qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID,
+			    wcnss->mem_region, wcnss->mem_phys,
+			    wcnss->mem_size, &wcnss->mem_reloc);
+	if (ret)
+		return ret;
+
+	qcom_pil_info_store("wcnss", wcnss->mem_reloc, wcnss->mem_size);
 
-	return qcom_mdt_load(wcnss->dev, fw, rproc->firmware, WCNSS_PAS_ID,
-			     wcnss->mem_region, wcnss->mem_phys,
-			     wcnss->mem_size, &wcnss->mem_reloc);
+	return 0;
 }
 
 static void wcnss_indicate_nv_download(struct qcom_wcnss *wcnss)
-- 
2.26.2


  parent reply	other threads:[~2020-05-13  6:06 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-13  5:56 [PATCH v5 0/5] remoteproc: qcom: PIL info support Bjorn Andersson
2020-05-13  5:56 ` [PATCH v5 1/5] dt-bindings: remoteproc: Add Qualcomm PIL info binding Bjorn Andersson
2020-05-20 17:59   ` Mathieu Poirier
2020-05-26 22:32   ` Rob Herring
2020-05-13  5:56 ` [PATCH v5 2/5] remoteproc: qcom: Introduce helper to store pil info in IMEM Bjorn Andersson
2020-05-20 18:00   ` Mathieu Poirier
2020-05-13  5:56 ` Bjorn Andersson [this message]
2020-05-14 18:48   ` [PATCH v5 3/5] remoteproc: qcom: Update PIL relocation info on load kbuild test robot
2020-05-14 18:48     ` kbuild test robot
2020-05-19 18:14   ` rishabhb
2020-05-19 23:07     ` Bjorn Andersson
2020-05-13  5:56 ` [PATCH v5 4/5] arm64: dts: qcom: qcs404: Add IMEM and PIL info region Bjorn Andersson
2020-05-13  5:56 ` [PATCH v5 5/5] arm64: dts: qcom: sdm845: " Bjorn Andersson
2020-05-14 16:53 ` [PATCH v5 0/5] remoteproc: qcom: PIL info support Vinod Koul

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200513055641.1413100-4-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=agross@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=ohad@wizery.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.