All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Gleixner <tglx@linutronix.de>
To: LKML <linux-kernel@vger.kernel.org>
Cc: x86@kernel.org, Paolo Bonzini <pbonzini@redhat.com>,
	kvm@vger.kernel.org,
	Alexandre Chartre <alexandre.chartre@oracle.com>,
	Peter Zijlstra <peterz@infradead.org>,
	Juergen Gross <jgross@suse.com>,
	Tom Lendacky <thomas.lendacky@amd.com>
Subject: [patch 4/7] x86/kvm/vmx: Move guest enter/exit into .noinstr.text
Date: Tue, 19 May 2020 22:31:32 +0200	[thread overview]
Message-ID: <20200519211224.566955854@linutronix.de> (raw)
In-Reply-To: 20200519203128.773151484@linutronix.de


Move the functions which are inside the RCU off region into the
non-instrumentable text section.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lkml.kernel.org/r/20200505134341.781667216@linutronix.de


diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h
index 07533795b8d2..275e7fd20310 100644
--- a/arch/x86/include/asm/hardirq.h
+++ b/arch/x86/include/asm/hardirq.h
@@ -67,12 +67,12 @@ static inline void kvm_set_cpu_l1tf_flush_l1d(void)
 	__this_cpu_write(irq_stat.kvm_cpu_l1tf_flush_l1d, 1);
 }
 
-static inline void kvm_clear_cpu_l1tf_flush_l1d(void)
+static __always_inline void kvm_clear_cpu_l1tf_flush_l1d(void)
 {
 	__this_cpu_write(irq_stat.kvm_cpu_l1tf_flush_l1d, 0);
 }
 
-static inline bool kvm_get_cpu_l1tf_flush_l1d(void)
+static __always_inline bool kvm_get_cpu_l1tf_flush_l1d(void)
 {
 	return __this_cpu_read(irq_stat.kvm_cpu_l1tf_flush_l1d);
 }
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index fd78bd44b2d6..b7492c804c30 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -1620,7 +1620,15 @@ asmlinkage void kvm_spurious_fault(void);
 	insn "\n\t"							\
 	"jmp	668f \n\t"						\
 	"667: \n\t"							\
+	"1: \n\t"							\
+	".pushsection .discard.instr_begin \n\t"			\
+	".long 1b - . \n\t"						\
+	".popsection \n\t"						\
 	"call	kvm_spurious_fault \n\t"				\
+	"1: \n\t"							\
+	".pushsection .discard.instr_end \n\t"				\
+	".long 1b - . \n\t"						\
+	".popsection \n\t"						\
 	"668: \n\t"							\
 	_ASM_EXTABLE(666b, 667b)
 
diff --git a/arch/x86/kvm/vmx/ops.h b/arch/x86/kvm/vmx/ops.h
index 5f1ac002b4b6..692b0c31c9c8 100644
--- a/arch/x86/kvm/vmx/ops.h
+++ b/arch/x86/kvm/vmx/ops.h
@@ -146,7 +146,9 @@ do {									\
 			  : : op1 : "cc" : error, fault);		\
 	return;								\
 error:									\
+	instrumentation_begin();					\
 	insn##_error(error_args);					\
+	instrumentation_end();						\
 	return;								\
 fault:									\
 	kvm_spurious_fault();						\
@@ -161,7 +163,9 @@ do {									\
 			  : : op1, op2 : "cc" : error, fault);		\
 	return;								\
 error:									\
+	instrumentation_begin();					\
 	insn##_error(error_args);					\
+	instrumentation_end();						\
 	return;								\
 fault:									\
 	kvm_spurious_fault();						\
diff --git a/arch/x86/kvm/vmx/vmenter.S b/arch/x86/kvm/vmx/vmenter.S
index e0a182cb3cdd..799db084a336 100644
--- a/arch/x86/kvm/vmx/vmenter.S
+++ b/arch/x86/kvm/vmx/vmenter.S
@@ -27,7 +27,7 @@
 #define VCPU_R15	__VCPU_REGS_R15 * WORD_SIZE
 #endif
 
-	.text
+.section .noinstr.text, "ax"
 
 /**
  * vmx_vmenter - VM-Enter the current loaded VMCS
@@ -234,6 +234,9 @@ SYM_FUNC_START(__vmx_vcpu_run)
 	jmp 1b
 SYM_FUNC_END(__vmx_vcpu_run)
 
+
+.section .text, "ax"
+
 /**
  * vmread_error_trampoline - Trampoline from inline asm to vmread_error()
  * @field:	VMCS field encoding that failed
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index afdb6f489ab2..0a751a6ddf6e 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -6090,7 +6090,7 @@ static int vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
  * information but as all relevant affected CPUs have 32KiB L1D cache size
  * there is no point in doing so.
  */
-static void vmx_l1d_flush(struct kvm_vcpu *vcpu)
+static noinstr void vmx_l1d_flush(struct kvm_vcpu *vcpu)
 {
 	int size = PAGE_SIZE << L1D_CACHE_ORDER;
 
@@ -6123,7 +6123,7 @@ static void vmx_l1d_flush(struct kvm_vcpu *vcpu)
 	vcpu->stat.l1d_flush++;
 
 	if (static_cpu_has(X86_FEATURE_FLUSH_L1D)) {
-		wrmsrl(MSR_IA32_FLUSH_CMD, L1D_FLUSH);
+		native_wrmsrl(MSR_IA32_FLUSH_CMD, L1D_FLUSH);
 		return;
 	}
 
@@ -6626,7 +6626,7 @@ static void vmx_update_hv_timer(struct kvm_vcpu *vcpu)
 	}
 }
 
-void vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)
+void noinstr vmx_update_host_rsp(struct vcpu_vmx *vmx, unsigned long host_rsp)
 {
 	if (unlikely(host_rsp != vmx->loaded_vmcs->host_state.rsp)) {
 		vmx->loaded_vmcs->host_state.rsp = host_rsp;
@@ -6648,6 +6648,63 @@ static fastpath_t vmx_exit_handlers_fastpath(struct kvm_vcpu *vcpu)
 
 bool __vmx_vcpu_run(struct vcpu_vmx *vmx, unsigned long *regs, bool launched);
 
+static noinstr void vmx_vcpu_enter_exit(struct kvm_vcpu *vcpu,
+					struct vcpu_vmx *vmx)
+{
+	/*
+	 * VMENTER enables interrupts (host state), but the kernel state is
+	 * interrupts disabled when this is invoked. Also tell RCU about
+	 * it. This is the same logic as for exit_to_user_mode().
+	 *
+	 * This ensures that e.g. latency analysis on the host observes
+	 * guest mode as interrupt enabled.
+	 *
+	 * guest_enter_irqoff() informs context tracking about the
+	 * transition to guest mode and if enabled adjusts RCU state
+	 * accordingly.
+	 */
+	instrumentation_begin();
+	trace_hardirqs_on_prepare();
+	lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+	instrumentation_end();
+
+	guest_enter_irqoff();
+	lockdep_hardirqs_on(CALLER_ADDR0);
+
+	/* L1D Flush includes CPU buffer clear to mitigate MDS */
+	if (static_branch_unlikely(&vmx_l1d_should_flush))
+		vmx_l1d_flush(vcpu);
+	else if (static_branch_unlikely(&mds_user_clear))
+		mds_clear_cpu_buffers();
+
+	if (vcpu->arch.cr2 != read_cr2())
+		write_cr2(vcpu->arch.cr2);
+
+	vmx->fail = __vmx_vcpu_run(vmx, (unsigned long *)&vcpu->arch.regs,
+				   vmx->loaded_vmcs->launched);
+
+	vcpu->arch.cr2 = read_cr2();
+
+	/*
+	 * VMEXIT disables interrupts (host state), but tracing and lockdep
+	 * have them in state 'on' as recorded before entering guest mode.
+	 * Same as enter_from_user_mode().
+	 *
+	 * guest_exit_irqoff() restores host context and reinstates RCU if
+	 * enabled and required.
+	 *
+	 * This needs to be done before the below as native_read_msr()
+	 * contains a tracepoint and x86_spec_ctrl_restore_host() calls
+	 * into world and some more.
+	 */
+	lockdep_hardirqs_off(CALLER_ADDR0);
+	guest_exit_irqoff();
+
+	instrumentation_begin();
+	trace_hardirqs_off_prepare();
+	instrumentation_end();
+}
+
 static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	fastpath_t exit_fastpath;
@@ -6724,52 +6781,8 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	x86_spec_ctrl_set_guest(vmx->spec_ctrl, 0);
 
-	/*
-	 * VMENTER enables interrupts (host state), but the kernel state is
-	 * interrupts disabled when this is invoked. Also tell RCU about
-	 * it. This is the same logic as for exit_to_user_mode().
-	 *
-	 * This ensures that e.g. latency analysis on the host observes
-	 * guest mode as interrupt enabled.
-	 *
-	 * guest_enter_irqoff() informs context tracking about the
-	 * transition to guest mode and if enabled adjusts RCU state
-	 * accordingly.
-	 */
-	trace_hardirqs_on_prepare();
-	lockdep_hardirqs_on_prepare(CALLER_ADDR0);
-	guest_enter_irqoff();
-	lockdep_hardirqs_on(CALLER_ADDR0);
-
-	/* L1D Flush includes CPU buffer clear to mitigate MDS */
-	if (static_branch_unlikely(&vmx_l1d_should_flush))
-		vmx_l1d_flush(vcpu);
-	else if (static_branch_unlikely(&mds_user_clear))
-		mds_clear_cpu_buffers();
-
-	if (vcpu->arch.cr2 != read_cr2())
-		write_cr2(vcpu->arch.cr2);
-
-	vmx->fail = __vmx_vcpu_run(vmx, (unsigned long *)&vcpu->arch.regs,
-				   vmx->loaded_vmcs->launched);
-
-	vcpu->arch.cr2 = read_cr2();
-
-	/*
-	 * VMEXIT disables interrupts (host state), but tracing and lockdep
-	 * have them in state 'on' as recorded before entering guest mode.
-	 * Same as enter_from_user_mode().
-	 *
-	 * guest_exit_irqoff() restores host context and reinstates RCU if
-	 * enabled and required.
-	 *
-	 * This needs to be done before the below as native_read_msr()
-	 * contains a tracepoint and x86_spec_ctrl_restore_host() calls
-	 * into world and some more.
-	 */
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	guest_exit_irqoff();
-	trace_hardirqs_off_prepare();
+	/* The actual VMENTER/EXIT is in the .noinstr.text section. */
+	vmx_vcpu_enter_exit(vcpu, vmx);
 
 	/*
 	 * We do not use IBRS in the kernel. If this vCPU has used the
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 28663a6688d1..c1257100ecbb 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -379,7 +379,7 @@ int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 }
 EXPORT_SYMBOL_GPL(kvm_set_apic_base);
 
-asmlinkage __visible void kvm_spurious_fault(void)
+asmlinkage __visible noinstr void kvm_spurious_fault(void)
 {
 	/* Fault while not rebooting.  We want the trace. */
 	BUG_ON(!kvm_rebooting);


  parent reply	other threads:[~2020-05-19 21:13 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-19 20:31 [patch 0/7] x86/KVM: Async #PF and instrumentation protection Thomas Gleixner
2020-05-19 20:31 ` [patch 1/7] x86/kvm: Move context tracking where it belongs Thomas Gleixner
2020-05-19 20:31 ` [patch 2/7] x86/kvm/vmx: Add hardirq tracing to guest enter/exit Thomas Gleixner
2020-05-20  5:48   ` kbuild test robot
2020-05-19 20:31 ` [patch 3/7] x86/kvm/svm: Add hardirq tracing on " Thomas Gleixner
2020-05-20  8:19   ` kbuild test robot
2020-05-19 20:31 ` Thomas Gleixner [this message]
2020-05-19 20:31 ` [patch 5/7] x86/kvm/svm: Move guest enter/exit into .noinstr.text Thomas Gleixner
2020-05-20  9:20   ` kbuild test robot
2020-05-20 13:45   ` kbuild test robot
2020-05-19 20:31 ` [patch 6/7] x86/kvm/svm: Use uninstrumented wrmsrl() to restore GS Thomas Gleixner
2020-05-19 20:31 ` [patch 7/7] x86/kvm/vmx: Use native read/write_cr2() Thomas Gleixner
2020-05-20  7:41 ` [patch 0/7] x86/KVM: Async #PF and instrumentation protection Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200519211224.566955854@linutronix.de \
    --to=tglx@linutronix.de \
    --cc=alexandre.chartre@oracle.com \
    --cc=jgross@suse.com \
    --cc=kvm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=pbonzini@redhat.com \
    --cc=peterz@infradead.org \
    --cc=thomas.lendacky@amd.com \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.