All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lucas De Marchi <lucas.demarchi@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: fernando.pacheco@intel.com, Matthew Auld <matthew.auld@intel.com>
Subject: [Intel-gfx] [PATCH 21/37] drm/i915/dg1: Add and setup DPLLs for DG1
Date: Wed, 20 May 2020 17:37:47 -0700	[thread overview]
Message-ID: <20200521003803.18936-22-lucas.demarchi@intel.com> (raw)
In-Reply-To: <20200521003803.18936-1-lucas.demarchi@intel.com>

From: Aditya Swarup <aditya.swarup@intel.com>

Add entries for dg1 plls and setup dg1_pll_mgr to reuse icl callbacks.
Initial setup for shared dplls DPLL0/1 for DDIA/B and DPLL2/3 for
DDIC/D. Configure dpll cfgcrx registers to drive the plls on DG1.

Signed-off-by: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
---
 drivers/gpu/drm/i915/display/intel_dpll_mgr.c | 41 +++++++++++++++++--
 1 file changed, 37 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
index f8078a288379..d764b6438114 100644
--- a/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
+++ b/drivers/gpu/drm/i915/display/intel_dpll_mgr.c
@@ -3528,7 +3528,17 @@ static bool icl_get_combo_phy_dpll(struct intel_atomic_state *state,
 		return false;
 	}
 
-	if (IS_ROCKETLAKE(dev_priv)) {
+	if (IS_DG1(dev_priv)) {
+		if (port == PORT_D || port == PORT_E) {
+			dpll_mask =
+				BIT(DPLL_ID_DG1_DPLL2) |
+				BIT(DPLL_ID_DG1_DPLL3);
+		} else {
+			dpll_mask =
+				BIT(DPLL_ID_DG1_DPLL0) |
+				BIT(DPLL_ID_DG1_DPLL1);
+		}
+	} else if (IS_ROCKETLAKE(dev_priv)) {
 		dpll_mask =
 			BIT(DPLL_ID_EHL_DPLL4) |
 			BIT(DPLL_ID_ICL_DPLL1) |
@@ -3818,7 +3828,10 @@ static bool icl_pll_get_hw_state(struct drm_i915_private *dev_priv,
 	if (!(val & PLL_ENABLE))
 		goto out;
 
-	if (INTEL_GEN(dev_priv) >= 12) {
+	if (IS_DG1(dev_priv)) {
+		hw_state->cfgcr0 = intel_de_read(dev_priv, DG1_DPLL_CFGCR0(id));
+		hw_state->cfgcr1 = intel_de_read(dev_priv, DG1_DPLL_CFGCR1(id));
+	} else if (INTEL_GEN(dev_priv) >= 12) {
 		hw_state->cfgcr0 = intel_de_read(dev_priv,
 						 TGL_DPLL_CFGCR0(id));
 		hw_state->cfgcr1 = intel_de_read(dev_priv,
@@ -3871,7 +3884,10 @@ static void icl_dpll_write(struct drm_i915_private *dev_priv,
 	const enum intel_dpll_id id = pll->info->id;
 	i915_reg_t cfgcr0_reg, cfgcr1_reg;
 
-	if (INTEL_GEN(dev_priv) >= 12) {
+	if (IS_DG1(dev_priv)) {
+		cfgcr0_reg = DG1_DPLL_CFGCR0(id);
+		cfgcr1_reg = DG1_DPLL_CFGCR1(id);
+	} else if (INTEL_GEN(dev_priv) >= 12) {
 		cfgcr0_reg = TGL_DPLL_CFGCR0(id);
 		cfgcr1_reg = TGL_DPLL_CFGCR1(id);
 	} else {
@@ -4317,6 +4333,21 @@ static const struct intel_dpll_mgr rkl_pll_mgr = {
 	.dump_hw_state = icl_dump_hw_state,
 };
 
+static const struct dpll_info dg1_plls[] = {
+	{ "DPLL 0", &combo_pll_funcs, DPLL_ID_DG1_DPLL0, 0 },
+	{ "DPLL 1", &combo_pll_funcs, DPLL_ID_DG1_DPLL1, 0 },
+	{ "DPLL 2", &combo_pll_funcs, DPLL_ID_DG1_DPLL2, 0 },
+	{ "DPLL 3", &combo_pll_funcs, DPLL_ID_DG1_DPLL3, 0 },
+	{ },
+};
+
+static const struct intel_dpll_mgr dg1_pll_mgr = {
+	.dpll_info = dg1_plls,
+	.get_dplls = icl_get_dplls,
+	.put_dplls = icl_put_dplls,
+	.dump_hw_state = icl_dump_hw_state,
+};
+
 /**
  * intel_shared_dpll_init - Initialize shared DPLLs
  * @dev: drm device
@@ -4330,7 +4361,9 @@ void intel_shared_dpll_init(struct drm_device *dev)
 	const struct dpll_info *dpll_info;
 	int i;
 
-	if (IS_ROCKETLAKE(dev_priv))
+	if (IS_DG1(dev_priv))
+		dpll_mgr = &dg1_pll_mgr;
+	else if (IS_ROCKETLAKE(dev_priv))
 		dpll_mgr = &rkl_pll_mgr;
 	else if (INTEL_GEN(dev_priv) >= 12)
 		dpll_mgr = &tgl_pll_mgr;
-- 
2.26.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2020-05-21  0:38 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-21  0:37 [Intel-gfx] [PATCH 00/37] Introduce DG1 Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 01/37] drm/i915/rkl: Add DPLL4 support Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 02/37] drm/i915/rkl: Add DDC pin mapping Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 03/37] drm/i915/rkl: Setup ports/phys Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 04/37] drm/i915/rkl: provide port/phy mapping for vbt Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 05/37] drm/i915/rkl: Handle HTI Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 06/37] drm/i915/rkl: Handle comp master/slave relationships for PHYs Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 07/37] drm/i915/rkl: Add initial workarounds Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 08/37] drm/i915: make intel_{uncore, de}_rmw() more useful Lucas De Marchi
2020-05-21 17:24   ` Souza, Jose
2020-05-21 17:30     ` Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 09/37] drm/i915: Add has_master_unit_irq flag Lucas De Marchi
2020-05-26 18:10   ` Souza, Jose
2020-05-21  0:37 ` [Intel-gfx] [PATCH 10/37] drm/i915: add pcie snoop flag Lucas De Marchi
2020-05-21  8:15   ` Chris Wilson
2020-05-21  0:37 ` [Intel-gfx] [PATCH 11/37] drm/i915/dg1: add initial DG-1 definitions Lucas De Marchi
2020-05-26 17:34   ` Souza, Jose
2020-05-26 17:51     ` Lucas De Marchi
2020-05-26 18:02       ` Souza, Jose
2020-05-26 17:51   ` Souza, Jose
2020-05-21  0:37 ` [Intel-gfx] [PATCH 12/37] drm/i915/dg1: Add DG1 PCI IDs Lucas De Marchi
2020-05-26 17:35   ` Souza, Jose
2020-05-21  0:37 ` [Intel-gfx] [PATCH 13/37] drm/i915/dg1: Add fake PCH Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 14/37] drm/i915/dg1: Initialize RAWCLK properly Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 15/37] drm/i915/dg1: Define MOCS table for DG1 Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 16/37] drm/i915/dg1: Add DG1 power wells Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 17/37] drm/i915/dg1: Increase mmio size to 4MB Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 18/37] drm/i915/dg1: add support for the master unit interrupt Lucas De Marchi
2020-05-26 18:02   ` Souza, Jose
2020-05-21  0:37 ` [Intel-gfx] [PATCH 19/37] drm/i915/dg1: Wait for pcode/uncore handshake at startup Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 20/37] drm/i915/dg1: Add DPLL macros for DG1 Lucas De Marchi
2020-05-21  0:37 ` Lucas De Marchi [this message]
2020-05-21  0:37 ` [Intel-gfx] [PATCH 22/37] drm/i915/dg1: Enable DPLL " Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 23/37] drm/i915/dg1: add hpd interrupt handling Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 24/37] drm/i915/dg1: invert HPD pins Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 25/37] drm/i915/dg1: gmbus pin mapping Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 26/37] drm/i915/dg1: Handle GRF/IC ECC error irq Lucas De Marchi
2020-05-21  8:19   ` Chris Wilson
2020-05-21  0:37 ` [Intel-gfx] [PATCH 27/37] drm/i915/dg1: Log counter on SLM ECC error Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 28/37] drm/i915/dg1: Enable first 2 ports for DG1 Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 29/37] drm/i915/dg1: Don't program PHY_MISC for PHY-C and PHY-D Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 30/37] drm/i915/dg1: Update comp master/slave relationships for PHYs Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 31/37] drm/i915/dg1: Update voltage swing tables for DP Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 32/37] drm/i915/dg1: provide port/phy mapping for vbt Lucas De Marchi
2020-05-21  0:37 ` [Intel-gfx] [PATCH 33/37] drm/i915/dg1: map/unmap pll clocks Lucas De Marchi
2020-05-21  0:38 ` [Intel-gfx] [PATCH 34/37] drm/i915/dg1: enable PORT C/D aka D/E Lucas De Marchi
2020-05-21  0:38 ` [Intel-gfx] [PATCH 35/37] drm/i915/dg1: Load DMC Lucas De Marchi
2020-05-26 17:42   ` Souza, Jose
2020-05-26 17:49     ` Lucas De Marchi
2020-05-21  0:38 ` [Intel-gfx] [PATCH 36/37] drm/i915/dg1: Add initial DG1 workarounds Lucas De Marchi
2020-05-21  0:38 ` [Intel-gfx] [PATCH 37/37] drm/i915/dg1: Remove SHPD_FILTER_CNT register programming Lucas De Marchi
2020-05-26 17:44   ` Souza, Jose
2020-05-21  1:05 ` [Intel-gfx] ✗ Fi.CI.CHECKPATCH: warning for Introduce DG1 Patchwork
2020-05-21  1:06 ` [Intel-gfx] ✗ Fi.CI.SPARSE: " Patchwork
2020-05-21  1:26 ` [Intel-gfx] ✓ Fi.CI.BAT: success " Patchwork
2020-05-21 18:34 ` [Intel-gfx] ✓ Fi.CI.IGT: " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200521003803.18936-22-lucas.demarchi@intel.com \
    --to=lucas.demarchi@intel.com \
    --cc=fernando.pacheco@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=matthew.auld@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.