All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: Johannes Berg <johannes@sipsolutions.net>, ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
	Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH v2 2/9] ath11k: add 6G frequency list supported by driver
Date: Fri, 22 May 2020 00:24:24 -0700	[thread overview]
Message-ID: <20200522072431.27601-3-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200522072431.27601-1-pradeepc@codeaurora.org>

This patch adds support for 6GHz frequency listing.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 71 +++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 36882562b976..f699e882949b 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -33,6 +33,15 @@
 	.max_power              = 30, \
 }
 
+#define CHAN6G(_channel, _freq, _flags) { \
+	.band                   = NL80211_BAND_6GHZ, \
+	.hw_value               = (_channel), \
+	.center_freq            = (_freq), \
+	.flags                  = (_flags), \
+	.max_antenna_gain       = 0, \
+	.max_power              = 30, \
+}
+
 /* frame mode values are mapped as per enum ath11k_hw_txrx_mode */
 static unsigned int ath11k_frame_mode = ATH11K_HW_TXRX_NATIVE_WIFI;
 module_param_named(frame_mode, ath11k_frame_mode, uint, 0644);
@@ -86,6 +95,68 @@ static const struct ieee80211_channel ath11k_5ghz_channels[] = {
 	CHAN5G(173, 5865, 0),
 };
 
+static const struct ieee80211_channel ath11k_6ghz_channels[] = {
+	CHAN6G(1, 5945, 0),
+	CHAN6G(5, 5965, 0),
+	CHAN6G(9, 5985, 0),
+	CHAN6G(13, 6005, 0),
+	CHAN6G(17, 6025, 0),
+	CHAN6G(21, 6045, 0),
+	CHAN6G(25, 6065, 0),
+	CHAN6G(29, 6085, 0),
+	CHAN6G(33, 6105, 0),
+	CHAN6G(37, 6125, 0),
+	CHAN6G(41, 6145, 0),
+	CHAN6G(45, 6165, 0),
+	CHAN6G(49, 6185, 0),
+	CHAN6G(53, 6205, 0),
+	CHAN6G(57, 6225, 0),
+	CHAN6G(61, 6245, 0),
+	CHAN6G(65, 6265, 0),
+	CHAN6G(69, 6285, 0),
+	CHAN6G(73, 6305, 0),
+	CHAN6G(77, 6325, 0),
+	CHAN6G(81, 6345, 0),
+	CHAN6G(85, 6365, 0),
+	CHAN6G(89, 6385, 0),
+	CHAN6G(93, 6405, 0),
+	CHAN6G(97, 6425, 0),
+	CHAN6G(101, 6445, 0),
+	CHAN6G(105, 6465, 0),
+	CHAN6G(109, 6485, 0),
+	CHAN6G(113, 6505, 0),
+	CHAN6G(117, 6525, 0),
+	CHAN6G(121, 6545, 0),
+	CHAN6G(125, 6565, 0),
+	CHAN6G(129, 6585, 0),
+	CHAN6G(133, 6605, 0),
+	CHAN6G(137, 6625, 0),
+	CHAN6G(141, 6645, 0),
+	CHAN6G(145, 6665, 0),
+	CHAN6G(149, 6685, 0),
+	CHAN6G(153, 6705, 0),
+	CHAN6G(157, 6725, 0),
+	CHAN6G(161, 6745, 0),
+	CHAN6G(165, 6765, 0),
+	CHAN6G(169, 6785, 0),
+	CHAN6G(173, 6805, 0),
+	CHAN6G(177, 6825, 0),
+	CHAN6G(181, 6845, 0),
+	CHAN6G(185, 6865, 0),
+	CHAN6G(189, 6885, 0),
+	CHAN6G(193, 6905, 0),
+	CHAN6G(197, 6925, 0),
+	CHAN6G(201, 6945, 0),
+	CHAN6G(205, 6965, 0),
+	CHAN6G(209, 6985, 0),
+	CHAN6G(213, 7005, 0),
+	CHAN6G(217, 7025, 0),
+	CHAN6G(221, 7045, 0),
+	CHAN6G(225, 7065, 0),
+	CHAN6G(229, 7085, 0),
+	CHAN6G(233, 7105, 0),
+};
+
 static struct ieee80211_rate ath11k_legacy_rates[] = {
 	{ .bitrate = 10,
 	  .hw_value = ATH11K_HW_RATE_CCK_LP_1M },
-- 
2.17.1

WARNING: multiple messages have this Message-ID (diff)
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: Johannes Berg <johannes@sipsolutions.net>, ath11k@lists.infradead.org
Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>,
	linux-wireless@vger.kernel.org
Subject: [PATCH v2 2/9] ath11k: add 6G frequency list supported by driver
Date: Fri, 22 May 2020 00:24:24 -0700	[thread overview]
Message-ID: <20200522072431.27601-3-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200522072431.27601-1-pradeepc@codeaurora.org>

This patch adds support for 6GHz frequency listing.

Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
 drivers/net/wireless/ath/ath11k/mac.c | 71 +++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 36882562b976..f699e882949b 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -33,6 +33,15 @@
 	.max_power              = 30, \
 }
 
+#define CHAN6G(_channel, _freq, _flags) { \
+	.band                   = NL80211_BAND_6GHZ, \
+	.hw_value               = (_channel), \
+	.center_freq            = (_freq), \
+	.flags                  = (_flags), \
+	.max_antenna_gain       = 0, \
+	.max_power              = 30, \
+}
+
 /* frame mode values are mapped as per enum ath11k_hw_txrx_mode */
 static unsigned int ath11k_frame_mode = ATH11K_HW_TXRX_NATIVE_WIFI;
 module_param_named(frame_mode, ath11k_frame_mode, uint, 0644);
@@ -86,6 +95,68 @@ static const struct ieee80211_channel ath11k_5ghz_channels[] = {
 	CHAN5G(173, 5865, 0),
 };
 
+static const struct ieee80211_channel ath11k_6ghz_channels[] = {
+	CHAN6G(1, 5945, 0),
+	CHAN6G(5, 5965, 0),
+	CHAN6G(9, 5985, 0),
+	CHAN6G(13, 6005, 0),
+	CHAN6G(17, 6025, 0),
+	CHAN6G(21, 6045, 0),
+	CHAN6G(25, 6065, 0),
+	CHAN6G(29, 6085, 0),
+	CHAN6G(33, 6105, 0),
+	CHAN6G(37, 6125, 0),
+	CHAN6G(41, 6145, 0),
+	CHAN6G(45, 6165, 0),
+	CHAN6G(49, 6185, 0),
+	CHAN6G(53, 6205, 0),
+	CHAN6G(57, 6225, 0),
+	CHAN6G(61, 6245, 0),
+	CHAN6G(65, 6265, 0),
+	CHAN6G(69, 6285, 0),
+	CHAN6G(73, 6305, 0),
+	CHAN6G(77, 6325, 0),
+	CHAN6G(81, 6345, 0),
+	CHAN6G(85, 6365, 0),
+	CHAN6G(89, 6385, 0),
+	CHAN6G(93, 6405, 0),
+	CHAN6G(97, 6425, 0),
+	CHAN6G(101, 6445, 0),
+	CHAN6G(105, 6465, 0),
+	CHAN6G(109, 6485, 0),
+	CHAN6G(113, 6505, 0),
+	CHAN6G(117, 6525, 0),
+	CHAN6G(121, 6545, 0),
+	CHAN6G(125, 6565, 0),
+	CHAN6G(129, 6585, 0),
+	CHAN6G(133, 6605, 0),
+	CHAN6G(137, 6625, 0),
+	CHAN6G(141, 6645, 0),
+	CHAN6G(145, 6665, 0),
+	CHAN6G(149, 6685, 0),
+	CHAN6G(153, 6705, 0),
+	CHAN6G(157, 6725, 0),
+	CHAN6G(161, 6745, 0),
+	CHAN6G(165, 6765, 0),
+	CHAN6G(169, 6785, 0),
+	CHAN6G(173, 6805, 0),
+	CHAN6G(177, 6825, 0),
+	CHAN6G(181, 6845, 0),
+	CHAN6G(185, 6865, 0),
+	CHAN6G(189, 6885, 0),
+	CHAN6G(193, 6905, 0),
+	CHAN6G(197, 6925, 0),
+	CHAN6G(201, 6945, 0),
+	CHAN6G(205, 6965, 0),
+	CHAN6G(209, 6985, 0),
+	CHAN6G(213, 7005, 0),
+	CHAN6G(217, 7025, 0),
+	CHAN6G(221, 7045, 0),
+	CHAN6G(225, 7065, 0),
+	CHAN6G(229, 7085, 0),
+	CHAN6G(233, 7105, 0),
+};
+
 static struct ieee80211_rate ath11k_legacy_rates[] = {
 	{ .bitrate = 10,
 	  .hw_value = ATH11K_HW_RATE_CCK_LP_1M },
-- 
2.17.1

_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k

  parent reply	other threads:[~2020-05-22  7:24 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-22  7:24 [PATCH v2 0/9] add 6GHz radio support in ath11k driver Pradeep Kumar Chitrapu
2020-05-22  7:24 ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 1/9] cfg80211: Add new channel flag to identify 6GHz PSC channel Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22 20:38   ` Johannes Berg
2020-05-22 20:38     ` Johannes Berg
2020-05-22 23:46     ` Pradeep Kumar Chitrapu
2020-05-22 23:46       ` Pradeep Kumar Chitrapu
2020-05-25  8:57       ` Johannes Berg
2020-05-25  8:57         ` Johannes Berg
2020-05-22  7:24 ` Pradeep Kumar Chitrapu [this message]
2020-05-22  7:24   ` [PATCH v2 2/9] ath11k: add 6G frequency list supported by driver Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 3/9] ath11k: add support for 6GHz radio in driver Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 4/9] ath11k: Use freq instead of channel number in rx path Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 5/9] ath11k: extend peer_assoc_cmd for 6GHz band Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 6/9] ath11k: set psc channel flag when sending channel list to firmware Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 7/9] ath11k: Add 6G scan dwell time parameter in scan request command Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 8/9] ath11k: Send multiple scan_chan_list messages if required Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu
2020-05-22  7:24 ` [PATCH v2 9/9] ath11k: Add support for 6g scan hint Pradeep Kumar Chitrapu
2020-05-22  7:24   ` Pradeep Kumar Chitrapu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200522072431.27601-3-pradeepc@codeaurora.org \
    --to=pradeepc@codeaurora.org \
    --cc=ath11k@lists.infradead.org \
    --cc=johannes@sipsolutions.net \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.