From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: Johannes Berg <johannes@sipsolutions.net>, ath11k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org,
Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Subject: [PATCH v2 3/9] ath11k: add support for 6GHz radio in driver
Date: Fri, 22 May 2020 00:24:25 -0700 [thread overview]
Message-ID: <20200522072431.27601-4-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200522072431.27601-1-pradeepc@codeaurora.org>
This patch adds 6GHz band support and mac80211 registration for
the 6G phy radio.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v2:
- fixed phymode to be set in 6ghz band
drivers/net/wireless/ath/ath11k/core.h | 6 +-
drivers/net/wireless/ath/ath11k/mac.c | 103 +++++++++++++++++++++----
drivers/net/wireless/ath/ath11k/wmi.c | 16 +++-
3 files changed, 105 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 7e51445cfa20..83bffd7f633a 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -353,7 +353,10 @@ struct ath11k_sta {
#endif
};
-#define ATH11K_NUM_CHANS 41
+#define ATH11K_MIN_5G_FREQ 4150
+#define ATH11K_MIN_6G_FREQ 5935
+#define ATH11K_MAX_6G_FREQ 7105
+#define ATH11K_NUM_CHANS 100
#define ATH11K_MAX_5G_CHAN 173
enum ath11k_state {
@@ -431,6 +434,7 @@ struct ath11k {
u32 vht_cap_info;
struct ath11k_he ar_he;
enum ath11k_state state;
+ bool supports_6ghz;
struct {
struct completion started;
struct completion completed;
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index f699e882949b..36b406ab09a3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -205,6 +205,17 @@ ath11k_phymodes[NUM_NL80211_BANDS][ATH11K_CHAN_WIDTH_NUM] = {
[NL80211_CHAN_WIDTH_160] = MODE_11AX_HE160,
[NL80211_CHAN_WIDTH_80P80] = MODE_11AX_HE80_80,
},
+ [NL80211_BAND_6GHZ] = {
+ [NL80211_CHAN_WIDTH_5] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_10] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_20_NOHT] = MODE_11AX_HE20,
+ [NL80211_CHAN_WIDTH_20] = MODE_11AX_HE20,
+ [NL80211_CHAN_WIDTH_40] = MODE_11AX_HE40,
+ [NL80211_CHAN_WIDTH_80] = MODE_11AX_HE80,
+ [NL80211_CHAN_WIDTH_160] = MODE_11AX_HE160,
+ [NL80211_CHAN_WIDTH_80P80] = MODE_11AX_HE80_80,
+ },
+
};
const struct htt_rx_ring_tlv_filter ath11k_mac_mon_status_filter_default = {
@@ -1560,6 +1571,7 @@ static void ath11k_peer_assoc_h_phymode(struct ath11k *ar,
}
break;
case NL80211_BAND_5GHZ:
+ case NL80211_BAND_6GHZ:
/* Check HE first */
if (sta->he_cap.has_he) {
phymode = ath11k_mac_get_phymode_he(ar, sta);
@@ -3492,6 +3504,18 @@ static void ath11k_mac_setup_ht_vht_cap(struct ath11k *ar,
band->vht_cap = ath11k_create_vht_cap(ar, rate_cap_tx_chainmask,
rate_cap_rx_chainmask);
}
+
+ if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
+ ar->supports_6ghz) {
+ band = &ar->mac.sbands[NL80211_BAND_6GHZ];
+ ht_cap = cap->band[NL80211_BAND_6GHZ].ht_cap_info;
+ if (ht_cap_info)
+ *ht_cap_info = ht_cap;
+ band->ht_cap = ath11k_create_ht_cap(ar, ht_cap,
+ rate_cap_rx_chainmask);
+ band->vht_cap = ath11k_create_vht_cap(ar, rate_cap_tx_chainmask,
+ rate_cap_rx_chainmask);
+ }
}
static int ath11k_check_chain_mask(struct ath11k *ar, u32 ant, bool is_tx_ant)
@@ -3746,6 +3770,17 @@ static void ath11k_mac_setup_he_cap(struct ath11k *ar,
band->iftype_data = ar->mac.iftype[NL80211_BAND_5GHZ];
band->n_iftype_data = count;
}
+
+ if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
+ ar->supports_6ghz) {
+ count = ath11k_mac_copy_he_cap(ar, cap,
+ ar->mac.iftype[NL80211_BAND_6GHZ],
+ NL80211_BAND_6GHZ);
+ band = &ar->mac.sbands[NL80211_BAND_6GHZ];
+ band->iftype_data = ar->mac.iftype[NL80211_BAND_6GHZ];
+ band->n_iftype_data = count;
+ }
+
}
static int __ath11k_set_antenna(struct ath11k *ar, u32 tx_ant, u32 rx_ant)
@@ -4188,6 +4223,12 @@ ath11k_mac_setup_vdev_create_params(struct ath11k_vif *arvif,
params->chains[NL80211_BAND_5GHZ].tx = ar->num_tx_chains;
params->chains[NL80211_BAND_5GHZ].rx = ar->num_rx_chains;
}
+ if (pdev->cap.supported_bands & WMI_HOST_WLAN_5G_CAP &&
+ ar->supports_6ghz) {
+ params->chains[NL80211_BAND_6GHZ].tx = ar->num_tx_chains;
+ params->chains[NL80211_BAND_6GHZ].rx = ar->num_rx_chains;
+ }
+
}
static u32
@@ -5320,7 +5361,7 @@ ath11k_mac_get_single_legacy_rate(struct ath11k *ar,
rate_idx = ffs(mask->control[band].legacy) - 1;
- if (band == NL80211_BAND_5GHZ)
+ if (band == NL80211_BAND_5GHZ || band == NL80211_BAND_6GHZ)
rate_idx += ATH11K_MAC_FIRST_OFDM_RATE_IDX;
hw_rate = ath11k_legacy_rates[rate_idx].hw_value;
@@ -5786,7 +5827,8 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
void *channels;
BUILD_BUG_ON((ARRAY_SIZE(ath11k_2ghz_channels) +
- ARRAY_SIZE(ath11k_5ghz_channels)) !=
+ ARRAY_SIZE(ath11k_5ghz_channels) +
+ ARRAY_SIZE(ath11k_6ghz_channels)) !=
ATH11K_NUM_CHANS);
reg_cap = &ar->ab->hal_reg_cap[ar->pdev_idx];
@@ -5799,6 +5841,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
return -ENOMEM;
band = &ar->mac.sbands[NL80211_BAND_2GHZ];
+ band->band = NL80211_BAND_2GHZ;
band->n_channels = ARRAY_SIZE(ath11k_2ghz_channels);
band->channels = channels;
band->n_bitrates = ath11k_g_rates_size;
@@ -5810,23 +5853,48 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
}
if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
- channels = kmemdup(ath11k_5ghz_channels,
- sizeof(ath11k_5ghz_channels),
- GFP_KERNEL);
- if (!channels) {
- kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
- return -ENOMEM;
+ if (reg_cap->high_5ghz_chan >= ATH11K_MAX_6G_FREQ) {
+ channels = kmemdup(ath11k_6ghz_channels,
+ sizeof(ath11k_6ghz_channels), GFP_KERNEL);
+ if (!channels) {
+ kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
+ return -ENOMEM;
+ }
+
+ ar->supports_6ghz = true;
+ band = &ar->mac.sbands[NL80211_BAND_6GHZ];
+ band->band = NL80211_BAND_6GHZ;
+ band->n_channels = ARRAY_SIZE(ath11k_6ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath11k_a_rates_size;
+ band->bitrates = ath11k_a_rates;
+ ar->hw->wiphy->bands[NL80211_BAND_6GHZ] = band;
+ ath11k_mac_update_ch_list(ar, band,
+ reg_cap->low_5ghz_chan,
+ reg_cap->high_5ghz_chan);
}
- band = &ar->mac.sbands[NL80211_BAND_5GHZ];
- band->n_channels = ARRAY_SIZE(ath11k_5ghz_channels);
- band->channels = channels;
- band->n_bitrates = ath11k_a_rates_size;
- band->bitrates = ath11k_a_rates;
- ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
- ath11k_mac_update_ch_list(ar, band,
- reg_cap->low_5ghz_chan,
- reg_cap->high_5ghz_chan);
+ if (reg_cap->low_5ghz_chan < ATH11K_MIN_6G_FREQ) {
+ channels = kmemdup(ath11k_5ghz_channels,
+ sizeof(ath11k_5ghz_channels),
+ GFP_KERNEL);
+ if (!channels) {
+ kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
+ kfree(ar->mac.sbands[NL80211_BAND_6GHZ].channels);
+ return -ENOMEM;
+ }
+
+ band = &ar->mac.sbands[NL80211_BAND_5GHZ];
+ band->band = NL80211_BAND_5GHZ;
+ band->n_channels = ARRAY_SIZE(ath11k_5ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath11k_a_rates_size;
+ band->bitrates = ath11k_a_rates;
+ ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
+ ath11k_mac_update_ch_list(ar, band,
+ reg_cap->low_5ghz_chan,
+ reg_cap->high_5ghz_chan);
+ }
}
return 0;
@@ -5880,6 +5948,7 @@ static void __ath11k_mac_unregister(struct ath11k *ar)
kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);
+ kfree(ar->mac.sbands[NL80211_BAND_6GHZ].channels);
SET_IEEE80211_DEV(ar->hw, NULL);
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index c2a972377687..291fb274134f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -368,6 +368,17 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
memcpy(&cap_band->he_ppet, &mac_phy_caps->he_ppet5g,
sizeof(struct ath11k_ppe_threshold));
+ cap_band = &pdev_cap->band[NL80211_BAND_6GHZ];
+ cap_band->max_bw_supported = mac_phy_caps->max_bw_supported_5g;
+ cap_band->ht_cap_info = mac_phy_caps->ht_cap_info_5g;
+ cap_band->he_cap_info[0] = mac_phy_caps->he_cap_info_5g;
+ cap_band->he_cap_info[1] = mac_phy_caps->he_cap_info_5g_ext;
+ cap_band->he_mcs = mac_phy_caps->he_supp_mcs_5g;
+ memcpy(cap_band->he_cap_phy_info, &mac_phy_caps->he_cap_phy_info_5g,
+ sizeof(u32) * PSOC_HOST_MAX_PHY_SIZE);
+ memcpy(&cap_band->he_ppet, &mac_phy_caps->he_ppet5g,
+ sizeof(struct ath11k_ppe_threshold));
+
return 0;
}
@@ -5206,9 +5217,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb)
goto exit;
}
- if (rx_ev.phy_mode == MODE_11B && status->band == NL80211_BAND_5GHZ)
+ if (rx_ev.phy_mode == MODE_11B &&
+ (status->band == NL80211_BAND_5GHZ || status->band == NL80211_BAND_6GHZ))
ath11k_dbg(ab, ATH11K_DBG_WMI,
- "wmi mgmt rx 11b (CCK) on 5GHz\n");
+ "wmi mgmt rx 11b (CCK) on 5/6GHz, band = %d\n", status->band);
sband = &ar->mac.sbands[status->band];
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
To: Johannes Berg <johannes@sipsolutions.net>, ath11k@lists.infradead.org
Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>,
linux-wireless@vger.kernel.org
Subject: [PATCH v2 3/9] ath11k: add support for 6GHz radio in driver
Date: Fri, 22 May 2020 00:24:25 -0700 [thread overview]
Message-ID: <20200522072431.27601-4-pradeepc@codeaurora.org> (raw)
In-Reply-To: <20200522072431.27601-1-pradeepc@codeaurora.org>
This patch adds 6GHz band support and mac80211 registration for
the 6G phy radio.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
---
v2:
- fixed phymode to be set in 6ghz band
drivers/net/wireless/ath/ath11k/core.h | 6 +-
drivers/net/wireless/ath/ath11k/mac.c | 103 +++++++++++++++++++++----
drivers/net/wireless/ath/ath11k/wmi.c | 16 +++-
3 files changed, 105 insertions(+), 20 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index 7e51445cfa20..83bffd7f633a 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -353,7 +353,10 @@ struct ath11k_sta {
#endif
};
-#define ATH11K_NUM_CHANS 41
+#define ATH11K_MIN_5G_FREQ 4150
+#define ATH11K_MIN_6G_FREQ 5935
+#define ATH11K_MAX_6G_FREQ 7105
+#define ATH11K_NUM_CHANS 100
#define ATH11K_MAX_5G_CHAN 173
enum ath11k_state {
@@ -431,6 +434,7 @@ struct ath11k {
u32 vht_cap_info;
struct ath11k_he ar_he;
enum ath11k_state state;
+ bool supports_6ghz;
struct {
struct completion started;
struct completion completed;
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index f699e882949b..36b406ab09a3 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -205,6 +205,17 @@ ath11k_phymodes[NUM_NL80211_BANDS][ATH11K_CHAN_WIDTH_NUM] = {
[NL80211_CHAN_WIDTH_160] = MODE_11AX_HE160,
[NL80211_CHAN_WIDTH_80P80] = MODE_11AX_HE80_80,
},
+ [NL80211_BAND_6GHZ] = {
+ [NL80211_CHAN_WIDTH_5] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_10] = MODE_UNKNOWN,
+ [NL80211_CHAN_WIDTH_20_NOHT] = MODE_11AX_HE20,
+ [NL80211_CHAN_WIDTH_20] = MODE_11AX_HE20,
+ [NL80211_CHAN_WIDTH_40] = MODE_11AX_HE40,
+ [NL80211_CHAN_WIDTH_80] = MODE_11AX_HE80,
+ [NL80211_CHAN_WIDTH_160] = MODE_11AX_HE160,
+ [NL80211_CHAN_WIDTH_80P80] = MODE_11AX_HE80_80,
+ },
+
};
const struct htt_rx_ring_tlv_filter ath11k_mac_mon_status_filter_default = {
@@ -1560,6 +1571,7 @@ static void ath11k_peer_assoc_h_phymode(struct ath11k *ar,
}
break;
case NL80211_BAND_5GHZ:
+ case NL80211_BAND_6GHZ:
/* Check HE first */
if (sta->he_cap.has_he) {
phymode = ath11k_mac_get_phymode_he(ar, sta);
@@ -3492,6 +3504,18 @@ static void ath11k_mac_setup_ht_vht_cap(struct ath11k *ar,
band->vht_cap = ath11k_create_vht_cap(ar, rate_cap_tx_chainmask,
rate_cap_rx_chainmask);
}
+
+ if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
+ ar->supports_6ghz) {
+ band = &ar->mac.sbands[NL80211_BAND_6GHZ];
+ ht_cap = cap->band[NL80211_BAND_6GHZ].ht_cap_info;
+ if (ht_cap_info)
+ *ht_cap_info = ht_cap;
+ band->ht_cap = ath11k_create_ht_cap(ar, ht_cap,
+ rate_cap_rx_chainmask);
+ band->vht_cap = ath11k_create_vht_cap(ar, rate_cap_tx_chainmask,
+ rate_cap_rx_chainmask);
+ }
}
static int ath11k_check_chain_mask(struct ath11k *ar, u32 ant, bool is_tx_ant)
@@ -3746,6 +3770,17 @@ static void ath11k_mac_setup_he_cap(struct ath11k *ar,
band->iftype_data = ar->mac.iftype[NL80211_BAND_5GHZ];
band->n_iftype_data = count;
}
+
+ if (cap->supported_bands & WMI_HOST_WLAN_5G_CAP &&
+ ar->supports_6ghz) {
+ count = ath11k_mac_copy_he_cap(ar, cap,
+ ar->mac.iftype[NL80211_BAND_6GHZ],
+ NL80211_BAND_6GHZ);
+ band = &ar->mac.sbands[NL80211_BAND_6GHZ];
+ band->iftype_data = ar->mac.iftype[NL80211_BAND_6GHZ];
+ band->n_iftype_data = count;
+ }
+
}
static int __ath11k_set_antenna(struct ath11k *ar, u32 tx_ant, u32 rx_ant)
@@ -4188,6 +4223,12 @@ ath11k_mac_setup_vdev_create_params(struct ath11k_vif *arvif,
params->chains[NL80211_BAND_5GHZ].tx = ar->num_tx_chains;
params->chains[NL80211_BAND_5GHZ].rx = ar->num_rx_chains;
}
+ if (pdev->cap.supported_bands & WMI_HOST_WLAN_5G_CAP &&
+ ar->supports_6ghz) {
+ params->chains[NL80211_BAND_6GHZ].tx = ar->num_tx_chains;
+ params->chains[NL80211_BAND_6GHZ].rx = ar->num_rx_chains;
+ }
+
}
static u32
@@ -5320,7 +5361,7 @@ ath11k_mac_get_single_legacy_rate(struct ath11k *ar,
rate_idx = ffs(mask->control[band].legacy) - 1;
- if (band == NL80211_BAND_5GHZ)
+ if (band == NL80211_BAND_5GHZ || band == NL80211_BAND_6GHZ)
rate_idx += ATH11K_MAC_FIRST_OFDM_RATE_IDX;
hw_rate = ath11k_legacy_rates[rate_idx].hw_value;
@@ -5786,7 +5827,8 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
void *channels;
BUILD_BUG_ON((ARRAY_SIZE(ath11k_2ghz_channels) +
- ARRAY_SIZE(ath11k_5ghz_channels)) !=
+ ARRAY_SIZE(ath11k_5ghz_channels) +
+ ARRAY_SIZE(ath11k_6ghz_channels)) !=
ATH11K_NUM_CHANS);
reg_cap = &ar->ab->hal_reg_cap[ar->pdev_idx];
@@ -5799,6 +5841,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
return -ENOMEM;
band = &ar->mac.sbands[NL80211_BAND_2GHZ];
+ band->band = NL80211_BAND_2GHZ;
band->n_channels = ARRAY_SIZE(ath11k_2ghz_channels);
band->channels = channels;
band->n_bitrates = ath11k_g_rates_size;
@@ -5810,23 +5853,48 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
}
if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
- channels = kmemdup(ath11k_5ghz_channels,
- sizeof(ath11k_5ghz_channels),
- GFP_KERNEL);
- if (!channels) {
- kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
- return -ENOMEM;
+ if (reg_cap->high_5ghz_chan >= ATH11K_MAX_6G_FREQ) {
+ channels = kmemdup(ath11k_6ghz_channels,
+ sizeof(ath11k_6ghz_channels), GFP_KERNEL);
+ if (!channels) {
+ kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
+ return -ENOMEM;
+ }
+
+ ar->supports_6ghz = true;
+ band = &ar->mac.sbands[NL80211_BAND_6GHZ];
+ band->band = NL80211_BAND_6GHZ;
+ band->n_channels = ARRAY_SIZE(ath11k_6ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath11k_a_rates_size;
+ band->bitrates = ath11k_a_rates;
+ ar->hw->wiphy->bands[NL80211_BAND_6GHZ] = band;
+ ath11k_mac_update_ch_list(ar, band,
+ reg_cap->low_5ghz_chan,
+ reg_cap->high_5ghz_chan);
}
- band = &ar->mac.sbands[NL80211_BAND_5GHZ];
- band->n_channels = ARRAY_SIZE(ath11k_5ghz_channels);
- band->channels = channels;
- band->n_bitrates = ath11k_a_rates_size;
- band->bitrates = ath11k_a_rates;
- ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
- ath11k_mac_update_ch_list(ar, band,
- reg_cap->low_5ghz_chan,
- reg_cap->high_5ghz_chan);
+ if (reg_cap->low_5ghz_chan < ATH11K_MIN_6G_FREQ) {
+ channels = kmemdup(ath11k_5ghz_channels,
+ sizeof(ath11k_5ghz_channels),
+ GFP_KERNEL);
+ if (!channels) {
+ kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
+ kfree(ar->mac.sbands[NL80211_BAND_6GHZ].channels);
+ return -ENOMEM;
+ }
+
+ band = &ar->mac.sbands[NL80211_BAND_5GHZ];
+ band->band = NL80211_BAND_5GHZ;
+ band->n_channels = ARRAY_SIZE(ath11k_5ghz_channels);
+ band->channels = channels;
+ band->n_bitrates = ath11k_a_rates_size;
+ band->bitrates = ath11k_a_rates;
+ ar->hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
+ ath11k_mac_update_ch_list(ar, band,
+ reg_cap->low_5ghz_chan,
+ reg_cap->high_5ghz_chan);
+ }
}
return 0;
@@ -5880,6 +5948,7 @@ static void __ath11k_mac_unregister(struct ath11k *ar)
kfree(ar->mac.sbands[NL80211_BAND_2GHZ].channels);
kfree(ar->mac.sbands[NL80211_BAND_5GHZ].channels);
+ kfree(ar->mac.sbands[NL80211_BAND_6GHZ].channels);
SET_IEEE80211_DEV(ar->hw, NULL);
}
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index c2a972377687..291fb274134f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -368,6 +368,17 @@ ath11k_pull_mac_phy_cap_svc_ready_ext(struct ath11k_pdev_wmi *wmi_handle,
memcpy(&cap_band->he_ppet, &mac_phy_caps->he_ppet5g,
sizeof(struct ath11k_ppe_threshold));
+ cap_band = &pdev_cap->band[NL80211_BAND_6GHZ];
+ cap_band->max_bw_supported = mac_phy_caps->max_bw_supported_5g;
+ cap_band->ht_cap_info = mac_phy_caps->ht_cap_info_5g;
+ cap_band->he_cap_info[0] = mac_phy_caps->he_cap_info_5g;
+ cap_band->he_cap_info[1] = mac_phy_caps->he_cap_info_5g_ext;
+ cap_band->he_mcs = mac_phy_caps->he_supp_mcs_5g;
+ memcpy(cap_band->he_cap_phy_info, &mac_phy_caps->he_cap_phy_info_5g,
+ sizeof(u32) * PSOC_HOST_MAX_PHY_SIZE);
+ memcpy(&cap_band->he_ppet, &mac_phy_caps->he_ppet5g,
+ sizeof(struct ath11k_ppe_threshold));
+
return 0;
}
@@ -5206,9 +5217,10 @@ static void ath11k_mgmt_rx_event(struct ath11k_base *ab, struct sk_buff *skb)
goto exit;
}
- if (rx_ev.phy_mode == MODE_11B && status->band == NL80211_BAND_5GHZ)
+ if (rx_ev.phy_mode == MODE_11B &&
+ (status->band == NL80211_BAND_5GHZ || status->band == NL80211_BAND_6GHZ))
ath11k_dbg(ab, ATH11K_DBG_WMI,
- "wmi mgmt rx 11b (CCK) on 5GHz\n");
+ "wmi mgmt rx 11b (CCK) on 5/6GHz, band = %d\n", status->band);
sband = &ar->mac.sbands[status->band];
--
2.17.1
_______________________________________________
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2020-05-22 7:24 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-22 7:24 [PATCH v2 0/9] add 6GHz radio support in ath11k driver Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 1/9] cfg80211: Add new channel flag to identify 6GHz PSC channel Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 20:38 ` Johannes Berg
2020-05-22 20:38 ` Johannes Berg
2020-05-22 23:46 ` Pradeep Kumar Chitrapu
2020-05-22 23:46 ` Pradeep Kumar Chitrapu
2020-05-25 8:57 ` Johannes Berg
2020-05-25 8:57 ` Johannes Berg
2020-05-22 7:24 ` [PATCH v2 2/9] ath11k: add 6G frequency list supported by driver Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu [this message]
2020-05-22 7:24 ` [PATCH v2 3/9] ath11k: add support for 6GHz radio in driver Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 4/9] ath11k: Use freq instead of channel number in rx path Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 5/9] ath11k: extend peer_assoc_cmd for 6GHz band Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 6/9] ath11k: set psc channel flag when sending channel list to firmware Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 7/9] ath11k: Add 6G scan dwell time parameter in scan request command Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 8/9] ath11k: Send multiple scan_chan_list messages if required Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
2020-05-22 7:24 ` [PATCH v2 9/9] ath11k: Add support for 6g scan hint Pradeep Kumar Chitrapu
2020-05-22 7:24 ` Pradeep Kumar Chitrapu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200522072431.27601-4-pradeepc@codeaurora.org \
--to=pradeepc@codeaurora.org \
--cc=ath11k@lists.infradead.org \
--cc=johannes@sipsolutions.net \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.