From: "Pali Rohár" <pali@kernel.org> To: Ulf Hansson <ulf.hansson@linaro.org>, linux-mmc@vger.kernel.org Cc: "Matthias Brugger" <matthias.bgg@gmail.com>, "Mauro Carvalho Chehab" <mchehab@kernel.org>, "Kalle Valo" <kvalo@codeaurora.org>, "Amitkumar Karwar" <amitkarwar@gmail.com>, "Ganapathi Bhat" <ganapathi.bhat@nxp.com>, "Xinming Hu" <huxinming820@gmail.com>, linux-kernel@vger.kernel.org, ath10k@lists.infradead.org, b43-dev@lists.infradead.org, brcm80211-dev-list.pdl@broadcom.com, brcm80211-dev-list@cypress.com, libertas-dev@lists.infradead.org, linux-wireless@vger.kernel.org, "Marek Behún" <marek.behun@nic.cz> Subject: [PATCH 01/11] mmc: sdio: Fix macro name for Marvell device with ID 0x9134 Date: Fri, 22 May 2020 16:44:02 +0200 [thread overview] Message-ID: <20200522144412.19712-2-pali@kernel.org> (raw) In-Reply-To: <20200522144412.19712-1-pali@kernel.org> Marvell SDIO device ID 0x9134 is used in SDIO Common CIS (Card Information Structure) and not in SDIO wlan function (with ID 1). SDIO Common CIS is accessed by function ID 0. So change this misleading macro name to SDIO_DEVICE_ID_MARVELL_8887_F0 as it does not refer to wlan function. It refers to function 0. Wlan module on this SDIO card is available at function ID 1 and is identified by different SDIO device ID 0x9135. Kernel quirks for SDIO devices are matched against device ID from SDIO Common CIS. Therefore device ID used in quirk is correct, just has misleading name. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/mmc/core/quirks.h | 2 +- include/linux/mmc/sdio_ids.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index 3dba15bccce2..472fa2fdcf13 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -139,7 +139,7 @@ static const struct mmc_fixup sdio_fixup_methods[] = { SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0, add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING), - SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887WLAN, + SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887_F0, add_limit_rate_quirk, 150000000), END_FIXUP diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 2e9a6e4634eb..96f43e0dc78f 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -59,7 +59,7 @@ #define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 #define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 #define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128 -#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134 +#define SDIO_DEVICE_ID_MARVELL_8887_F0 0x9134 #define SDIO_VENDOR_ID_MEDIATEK 0x037a -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: "Pali Rohár" <pali@kernel.org> To: Ulf Hansson <ulf.hansson@linaro.org>, linux-mmc@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com, libertas-dev@lists.infradead.org, "Xinming Hu" <huxinming820@gmail.com>, linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org, "Amitkumar Karwar" <amitkarwar@gmail.com>, "Marek Behún" <marek.behun@nic.cz>, "Ganapathi Bhat" <ganapathi.bhat@nxp.com>, ath10k@lists.infradead.org, "Matthias Brugger" <matthias.bgg@gmail.com>, "Mauro Carvalho Chehab" <mchehab@kernel.org>, brcm80211-dev-list@cypress.com, "Kalle Valo" <kvalo@codeaurora.org>, b43-dev@lists.infradead.org Subject: [PATCH 01/11] mmc: sdio: Fix macro name for Marvell device with ID 0x9134 Date: Fri, 22 May 2020 16:44:02 +0200 [thread overview] Message-ID: <20200522144412.19712-2-pali@kernel.org> (raw) In-Reply-To: <20200522144412.19712-1-pali@kernel.org> Marvell SDIO device ID 0x9134 is used in SDIO Common CIS (Card Information Structure) and not in SDIO wlan function (with ID 1). SDIO Common CIS is accessed by function ID 0. So change this misleading macro name to SDIO_DEVICE_ID_MARVELL_8887_F0 as it does not refer to wlan function. It refers to function 0. Wlan module on this SDIO card is available at function ID 1 and is identified by different SDIO device ID 0x9135. Kernel quirks for SDIO devices are matched against device ID from SDIO Common CIS. Therefore device ID used in quirk is correct, just has misleading name. Signed-off-by: Pali Rohár <pali@kernel.org> --- drivers/mmc/core/quirks.h | 2 +- include/linux/mmc/sdio_ids.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/core/quirks.h b/drivers/mmc/core/quirks.h index 3dba15bccce2..472fa2fdcf13 100644 --- a/drivers/mmc/core/quirks.h +++ b/drivers/mmc/core/quirks.h @@ -139,7 +139,7 @@ static const struct mmc_fixup sdio_fixup_methods[] = { SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8797_F0, add_quirk, MMC_QUIRK_BROKEN_IRQ_POLLING), - SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887WLAN, + SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8887_F0, add_limit_rate_quirk, 150000000), END_FIXUP diff --git a/include/linux/mmc/sdio_ids.h b/include/linux/mmc/sdio_ids.h index 2e9a6e4634eb..96f43e0dc78f 100644 --- a/include/linux/mmc/sdio_ids.h +++ b/include/linux/mmc/sdio_ids.h @@ -59,7 +59,7 @@ #define SDIO_DEVICE_ID_MARVELL_8688WLAN 0x9104 #define SDIO_DEVICE_ID_MARVELL_8688BT 0x9105 #define SDIO_DEVICE_ID_MARVELL_8797_F0 0x9128 -#define SDIO_DEVICE_ID_MARVELL_8887WLAN 0x9134 +#define SDIO_DEVICE_ID_MARVELL_8887_F0 0x9134 #define SDIO_VENDOR_ID_MEDIATEK 0x037a -- 2.20.1 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2020-05-22 14:45 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-22 14:44 [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers to common include file Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-22 14:44 ` Pali Rohár [this message] 2020-05-22 14:44 ` [PATCH 01/11] mmc: sdio: Fix macro name for Marvell device with ID 0x9134 Pali Rohár 2020-05-29 3:28 ` [EXT] " Ganapathi Bhat 2020-05-29 3:28 ` Ganapathi Bhat 2020-05-22 14:44 ` [PATCH 02/11] mmc: sdio: Change macro names for Marvell 8688 modules Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-28 12:32 ` [EXT] " Ganapathi Bhat 2020-05-28 12:32 ` Ganapathi Bhat 2020-05-22 14:44 ` [PATCH 03/11] mmc: sdio: Move SDIO IDs from mwifiex driver to common include file Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-25 10:38 ` Kalle Valo 2020-05-25 10:38 ` Kalle Valo 2020-05-28 12:29 ` [EXT] " Ganapathi Bhat 2020-05-28 12:29 ` Ganapathi Bhat 2020-05-22 14:44 ` [PATCH 04/11] mmc: sdio: Move SDIO IDs from btmrvl " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-28 12:27 ` [EXT] " Ganapathi Bhat 2020-05-28 12:27 ` Ganapathi Bhat 2020-05-22 14:44 ` [PATCH 05/11] mmc: sdio: Move SDIO IDs from btmtksdio " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-22 15:02 ` Matthias Brugger 2020-05-22 15:02 ` Matthias Brugger 2020-05-22 14:44 ` [PATCH 06/11] mmc: sdio: Move SDIO IDs from smssdio " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-22 14:44 ` [PATCH 07/11] mmc: sdio: Move SDIO IDs from ath6kl " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-25 10:38 ` Kalle Valo 2020-05-25 10:38 ` Kalle Valo 2020-05-22 14:44 ` [PATCH 08/11] mmc: sdio: Move SDIO IDs from ath10k " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-22 14:44 ` [PATCH 09/11] mmc: sdio: Move SDIO IDs from b43-sdio " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-22 14:44 ` [PATCH 10/11] mmc: sdio: Fix Cypress SDIO IDs macros in " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-22 14:44 ` [PATCH 11/11] mmc: sdio: Sort all SDIO IDs " Pali Rohár 2020-05-22 14:44 ` Pali Rohár 2020-05-25 7:15 ` [PATCH 00/11] mmc: sdio: Move SDIO IDs from drivers to " Ulf Hansson 2020-05-25 7:15 ` Ulf Hansson 2020-05-28 10:13 ` Ulf Hansson 2020-05-28 10:13 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200522144412.19712-2-pali@kernel.org \ --to=pali@kernel.org \ --cc=amitkarwar@gmail.com \ --cc=ath10k@lists.infradead.org \ --cc=b43-dev@lists.infradead.org \ --cc=brcm80211-dev-list.pdl@broadcom.com \ --cc=brcm80211-dev-list@cypress.com \ --cc=ganapathi.bhat@nxp.com \ --cc=huxinming820@gmail.com \ --cc=kvalo@codeaurora.org \ --cc=libertas-dev@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-wireless@vger.kernel.org \ --cc=marek.behun@nic.cz \ --cc=matthias.bgg@gmail.com \ --cc=mchehab@kernel.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.