All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
To: ulf.hansson@linaro.org, robh+dt@kernel.org,
	adrian.hunter@intel.com, michal.simek@xilinx.com
Cc: linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	wan.ahmad.zainie.wan.mohamad@intel.com
Subject: [PATCH v2 2/3] mmc: sdhci-of-arasan: Add support for Intel Keem Bay
Date: Tue, 26 May 2020 14:27:57 +0800	[thread overview]
Message-ID: <20200526062758.17642-3-wan.ahmad.zainie.wan.mohamad@intel.com> (raw)
In-Reply-To: <20200526062758.17642-1-wan.ahmad.zainie.wan.mohamad@intel.com>

Intel Keem Bay SoC eMMC/SD/SDIO controller is based on
Arasan SD 3.0 / eMMC 5.1 host controller IP.

However, it does not support 64-bit access as its AXI interface
has 32-bit address ports.

Signed-off-by: Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
---
 drivers/mmc/host/sdhci-of-arasan.c | 123 +++++++++++++++++++++++++++++
 1 file changed, 123 insertions(+)

diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
index 2fe2c4dcc280..db9b544465cd 100644
--- a/drivers/mmc/host/sdhci-of-arasan.c
+++ b/drivers/mmc/host/sdhci-of-arasan.c
@@ -75,6 +75,7 @@ struct sdhci_arasan_soc_ctl_field {
  *
  * @baseclkfreq:	Where to find corecfg_baseclkfreq
  * @clockmultiplier:	Where to find corecfg_clockmultiplier
+ * @support64b:		Where to find SUPPORT64B bit
  * @hiword_update:	If true, use HIWORD_UPDATE to access the syscon
  *
  * It's up to the licensee of the Arsan IP block to make these available
@@ -84,6 +85,7 @@ struct sdhci_arasan_soc_ctl_field {
 struct sdhci_arasan_soc_ctl_map {
 	struct sdhci_arasan_soc_ctl_field	baseclkfreq;
 	struct sdhci_arasan_soc_ctl_field	clockmultiplier;
+	struct sdhci_arasan_soc_ctl_field	support64b;
 	bool					hiword_update;
 };
 
@@ -180,6 +182,13 @@ static const struct sdhci_arasan_soc_ctl_map intel_lgm_sdxc_soc_ctl_map = {
 	.hiword_update = false,
 };
 
+static const struct sdhci_arasan_soc_ctl_map intel_keembay_soc_ctl_map = {
+	.baseclkfreq = { .reg = 0x0, .width = 8, .shift = 14 },
+	.clockmultiplier = { .reg = 0x4, .width = 8, .shift = 14 },
+	.support64b = { .reg = 0x4, .width = 1, .shift = 24 },
+	.hiword_update = false,
+};
+
 /**
  * sdhci_arasan_syscon_write - Write to a field in soc_ctl registers
  *
@@ -1095,6 +1104,50 @@ static struct sdhci_arasan_of_data sdhci_arasan_generic_data = {
 	.clk_ops = &arasan_clk_ops,
 };
 
+static const struct sdhci_pltfm_data sdhci_keembay_emmc_pdata = {
+	.ops = &sdhci_arasan_cqe_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		SDHCI_QUIRK_NO_LED |
+		SDHCI_QUIRK_32BIT_DMA_ADDR |
+		SDHCI_QUIRK_32BIT_DMA_SIZE |
+		SDHCI_QUIRK_32BIT_ADMA_SIZE,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+		SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 |
+		SDHCI_QUIRK2_STOP_WITH_TC |
+		SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+};
+
+static const struct sdhci_pltfm_data sdhci_keembay_sd_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		SDHCI_QUIRK_NO_LED |
+		SDHCI_QUIRK_32BIT_DMA_ADDR |
+		SDHCI_QUIRK_32BIT_DMA_SIZE |
+		SDHCI_QUIRK_32BIT_ADMA_SIZE,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+		SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
+		SDHCI_QUIRK2_STOP_WITH_TC |
+		SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+};
+
+static const struct sdhci_pltfm_data sdhci_keembay_sdio_pdata = {
+	.ops = &sdhci_arasan_ops,
+	.quirks = SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
+		SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
+		SDHCI_QUIRK_NO_LED |
+		SDHCI_QUIRK_32BIT_DMA_ADDR |
+		SDHCI_QUIRK_32BIT_DMA_SIZE |
+		SDHCI_QUIRK_32BIT_ADMA_SIZE,
+	.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+		SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN |
+		SDHCI_QUIRK2_HOST_OFF_CARD_ON |
+		SDHCI_QUIRK2_BROKEN_64_BIT_DMA,
+};
+
 static struct sdhci_arasan_of_data sdhci_arasan_rk3399_data = {
 	.soc_ctl_map = &rk3399_soc_ctl_map,
 	.pdata = &sdhci_arasan_cqe_pdata,
@@ -1140,6 +1193,21 @@ static struct sdhci_arasan_of_data sdhci_arasan_versal_data = {
 	.clk_ops = &versal_clk_ops,
 };
 
+static struct sdhci_arasan_of_data intel_keembay_emmc_data = {
+	.soc_ctl_map = &intel_keembay_soc_ctl_map,
+	.pdata = &sdhci_keembay_emmc_pdata,
+};
+
+static struct sdhci_arasan_of_data intel_keembay_sd_data = {
+	.soc_ctl_map = &intel_keembay_soc_ctl_map,
+	.pdata = &sdhci_keembay_sd_pdata,
+};
+
+static struct sdhci_arasan_of_data intel_keembay_sdio_data = {
+	.soc_ctl_map = &intel_keembay_soc_ctl_map,
+	.pdata = &sdhci_keembay_sdio_pdata,
+};
+
 static const struct of_device_id sdhci_arasan_of_match[] = {
 	/* SoC-specific compatible strings w/ soc_ctl_map */
 	{
@@ -1154,6 +1222,18 @@ static const struct of_device_id sdhci_arasan_of_match[] = {
 		.compatible = "intel,lgm-sdhci-5.1-sdxc",
 		.data = &intel_lgm_sdxc_data,
 	},
+	{
+		.compatible = "intel,keembay-sdhci-5.1-emmc",
+		.data = &intel_keembay_emmc_data,
+	},
+	{
+		.compatible = "intel,keembay-sdhci-5.1-sd",
+		.data = &intel_keembay_sd_data,
+	},
+	{
+		.compatible = "intel,keembay-sdhci-5.1-sdio",
+		.data = &intel_keembay_sdio_data,
+	},
 	/* Generic compatible below here */
 	{
 		.compatible = "arasan,sdhci-8.9a",
@@ -1297,6 +1377,40 @@ static void sdhci_arasan_unregister_sdclk(struct device *dev)
 	of_clk_del_provider(dev->of_node);
 }
 
+/**
+ * sdhci_arasan_update_support64b - Set SUPPORT_64B (64-bit System Bus Support)
+ *
+ * This should be set based on the System Address Bus.
+ * 0: the Core supports only 32-bit System Address Bus.
+ * 1: the Core supports 64-bit System Address Bus.
+ *
+ * NOTES:
+ * - For Keem Bay, it is required to clear this bit. Its default value is 1'b1.
+ *   Keem Bay does not support 64-bit access.
+ *
+ * @host		The sdhci_host
+ */
+static void sdhci_arasan_update_support64b(struct sdhci_host *host, u32 value)
+{
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
+	const struct sdhci_arasan_soc_ctl_map *soc_ctl_map =
+		sdhci_arasan->soc_ctl_map;
+
+	/* Having a map is optional */
+	if (!soc_ctl_map)
+		return;
+
+	/* If we have a map, we expect to have a syscon */
+	if (!sdhci_arasan->soc_ctl_base) {
+		pr_warn("%s: Have regmap, but no soc-ctl-syscon\n",
+			mmc_hostname(host->mmc));
+		return;
+	}
+
+	sdhci_arasan_syscon_write(host, &soc_ctl_map->support64b, value);
+}
+
 /**
  * sdhci_arasan_register_sdclk - Register the sdcardclk for a PHY to use
  *
@@ -1469,6 +1583,15 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
 				    "rockchip,rk3399-sdhci-5.1"))
 		sdhci_arasan_update_clockmultiplier(host, 0x0);
 
+	if (of_device_is_compatible(np, "intel,keembay-sdhci-5.1-emmc") ||
+	    of_device_is_compatible(np, "intel,keembay-sdhci-5.1-sd") ||
+	    of_device_is_compatible(np, "intel,keembay-sdhci-5.1-sdio")) {
+		sdhci_arasan_update_clockmultiplier(host, 0x0);
+		sdhci_arasan_update_support64b(host, 0x0);
+
+		host->mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
+	}
+
 	sdhci_arasan_update_baseclkfreq(host);
 
 	ret = sdhci_arasan_register_sdclk(sdhci_arasan, clk_xin, &pdev->dev);
-- 
2.17.1


  parent reply	other threads:[~2020-05-26  6:29 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-26  6:27 [PATCH v2 0/3] mmc: sdhci-of-arasan: Add support for Intel Keem Bay Wan Ahmad Zainie
2020-05-26  6:27 ` [PATCH v2 1/3] dt-bindings: mmc: arasan: Add compatible strings " Wan Ahmad Zainie
2020-05-28 10:14   ` Ulf Hansson
2020-05-26  6:27 ` Wan Ahmad Zainie [this message]
2020-05-28 10:14   ` [PATCH v2 2/3] mmc: sdhci-of-arasan: Add support " Ulf Hansson
2020-05-26  6:27 ` [PATCH v2 3/3] dt-bindings: mmc: convert arasan sdhci bindings to yaml Wan Ahmad Zainie
2020-05-28 10:14   ` Ulf Hansson
2020-05-29 17:25   ` Rob Herring
2020-06-08  8:58     ` Wan Mohamad, Wan Ahmad Zainie

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200526062758.17642-3-wan.ahmad.zainie.wan.mohamad@intel.com \
    --to=wan.ahmad.zainie.wan.mohamad@intel.com \
    --cc=adrian.hunter@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=michal.simek@xilinx.com \
    --cc=robh+dt@kernel.org \
    --cc=ulf.hansson@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.