From: Ludovic Barre <ludovic.barre@st.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org> Cc: <srinivas.kandagatla@linaro.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-mmc@vger.kernel.org>, <linux-stm32@st-md-mailman.stormreply.com>, Ludovic Barre <ludovic.barre@st.com> Subject: [PATCH 1/2] mmc: mmci_sdmmc: fix DMA API warning overlapping mappings Date: Tue, 26 May 2020 17:51:02 +0200 [thread overview] Message-ID: <20200526155103.12514-2-ludovic.barre@st.com> (raw) In-Reply-To: <20200526155103.12514-1-ludovic.barre@st.com> Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: WARNING: CPU: 1 PID: 20 at kernel/dma/debug.c:500 add_dma_entry+0x16c/0x17c DMA-API: exceeded 7 overlapping mappings of cacheline 0x031d2645 Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.5.0-rc2-00021-gdeda30999c2b-dirty #49 Hardware name: STM32 (Device Tree Support) Workqueue: events_freezable mmc_rescan [<c03138c0>] (unwind_backtrace) from [<c030d760>] (show_stack+0x10/0x14) [<c030d760>] (show_stack) from [<c0f2eb28>] (dump_stack+0xc0/0xd4) [<c0f2eb28>] (dump_stack) from [<c034a14c>] (__warn+0xd0/0xf8) [<c034a14c>] (__warn) from [<c034a530>] (warn_slowpath_fmt+0x94/0xb8) [<c034a530>] (warn_slowpath_fmt) from [<c03bca0c>] (add_dma_entry+0x16c/0x17c) [<c03bca0c>] (add_dma_entry) from [<c03bdf54>] (debug_dma_map_sg+0xe4/0x3d4) [<c03bdf54>] (debug_dma_map_sg) from [<c0d09244>] (sdmmc_idma_prep_data+0x94/0xf8) [<c0d09244>] (sdmmc_idma_prep_data) from [<c0d05a2c>] (mmci_prep_data+0x2c/0xb0) [<c0d05a2c>] (mmci_prep_data) from [<c0d073ec>] (mmci_start_data+0x134/0x2f0) [<c0d073ec>] (mmci_start_data) from [<c0d078d0>] (mmci_request+0xe8/0x154) [<c0d078d0>] (mmci_request) from [<c0cecb44>] (mmc_start_request+0x94/0xbc) DMA api debug brings to light leaking dma-mappings, dma_map_sg and dma_unmap_sg are not correctly balanced. If a request is prepared, the dma_map/unmap are done in asynchronous call pre_req (prep_data) and post_req (unprep_data). In this case the dma-mapping is right balanced. But if the request was not prepared, the data->host_cookie is define to zero and the dma_map/unmap must be done in the request. The dma_map is called by mmci_dma_start (prep_data), but there is no dma_unmap in this case. This patch adds dma_unmap_sg when the dma is finalized and the data cookie is zero (request not prepared). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> --- drivers/mmc/host/mmci_stm32_sdmmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index 14f99d8aa3f0..2965b1c062e1 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -188,6 +188,9 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl) static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data) { writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR); + + if (!data->host_cookie) + sdmmc_idma_unprep_data(host, data, 0); } static void mmci_sdmmc_set_clkreg(struct mmci_host *host, unsigned int desired) -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ludovic Barre <ludovic.barre@st.com> To: Ulf Hansson <ulf.hansson@linaro.org>, Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org, Alexandre Torgue <alexandre.torgue@st.com>, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, srinivas.kandagatla@linaro.org, Ludovic Barre <ludovic.barre@st.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] mmc: mmci_sdmmc: fix DMA API warning overlapping mappings Date: Tue, 26 May 2020 17:51:02 +0200 [thread overview] Message-ID: <20200526155103.12514-2-ludovic.barre@st.com> (raw) In-Reply-To: <20200526155103.12514-1-ludovic.barre@st.com> Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning: WARNING: CPU: 1 PID: 20 at kernel/dma/debug.c:500 add_dma_entry+0x16c/0x17c DMA-API: exceeded 7 overlapping mappings of cacheline 0x031d2645 Modules linked in: CPU: 1 PID: 20 Comm: kworker/1:1 Not tainted 5.5.0-rc2-00021-gdeda30999c2b-dirty #49 Hardware name: STM32 (Device Tree Support) Workqueue: events_freezable mmc_rescan [<c03138c0>] (unwind_backtrace) from [<c030d760>] (show_stack+0x10/0x14) [<c030d760>] (show_stack) from [<c0f2eb28>] (dump_stack+0xc0/0xd4) [<c0f2eb28>] (dump_stack) from [<c034a14c>] (__warn+0xd0/0xf8) [<c034a14c>] (__warn) from [<c034a530>] (warn_slowpath_fmt+0x94/0xb8) [<c034a530>] (warn_slowpath_fmt) from [<c03bca0c>] (add_dma_entry+0x16c/0x17c) [<c03bca0c>] (add_dma_entry) from [<c03bdf54>] (debug_dma_map_sg+0xe4/0x3d4) [<c03bdf54>] (debug_dma_map_sg) from [<c0d09244>] (sdmmc_idma_prep_data+0x94/0xf8) [<c0d09244>] (sdmmc_idma_prep_data) from [<c0d05a2c>] (mmci_prep_data+0x2c/0xb0) [<c0d05a2c>] (mmci_prep_data) from [<c0d073ec>] (mmci_start_data+0x134/0x2f0) [<c0d073ec>] (mmci_start_data) from [<c0d078d0>] (mmci_request+0xe8/0x154) [<c0d078d0>] (mmci_request) from [<c0cecb44>] (mmc_start_request+0x94/0xbc) DMA api debug brings to light leaking dma-mappings, dma_map_sg and dma_unmap_sg are not correctly balanced. If a request is prepared, the dma_map/unmap are done in asynchronous call pre_req (prep_data) and post_req (unprep_data). In this case the dma-mapping is right balanced. But if the request was not prepared, the data->host_cookie is define to zero and the dma_map/unmap must be done in the request. The dma_map is called by mmci_dma_start (prep_data), but there is no dma_unmap in this case. This patch adds dma_unmap_sg when the dma is finalized and the data cookie is zero (request not prepared). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> --- drivers/mmc/host/mmci_stm32_sdmmc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/mmc/host/mmci_stm32_sdmmc.c b/drivers/mmc/host/mmci_stm32_sdmmc.c index 14f99d8aa3f0..2965b1c062e1 100644 --- a/drivers/mmc/host/mmci_stm32_sdmmc.c +++ b/drivers/mmc/host/mmci_stm32_sdmmc.c @@ -188,6 +188,9 @@ static int sdmmc_idma_start(struct mmci_host *host, unsigned int *datactrl) static void sdmmc_idma_finalize(struct mmci_host *host, struct mmc_data *data) { writel_relaxed(0, host->base + MMCI_STM32_IDMACTRLR); + + if (!data->host_cookie) + sdmmc_idma_unprep_data(host, data, 0); } static void mmci_sdmmc_set_clkreg(struct mmci_host *host, unsigned int desired) -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-26 15:51 UTC|newest] Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-26 15:51 [PATCH 0/2] mmc: mmci_sdmmc: fix dma api warnings Ludovic Barre 2020-05-26 15:51 ` Ludovic Barre 2020-05-26 15:51 ` Ludovic Barre [this message] 2020-05-26 15:51 ` [PATCH 1/2] mmc: mmci_sdmmc: fix DMA API warning overlapping mappings Ludovic Barre 2020-05-28 10:14 ` Ulf Hansson 2020-05-28 10:14 ` Ulf Hansson 2020-05-26 15:51 ` [PATCH 2/2] mmc: mmci_sdmmc: fix DMA API warning max segment size Ludovic Barre 2020-05-26 15:51 ` Ludovic Barre 2020-05-28 10:14 ` Ulf Hansson 2020-05-28 10:14 ` Ulf Hansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200526155103.12514-2-ludovic.barre@st.com \ --to=ludovic.barre@st.com \ --cc=alexandre.torgue@st.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ --cc=srinivas.kandagatla@linaro.org \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.