From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de>, Nicolas Ferre <nicolas.ferre@microchip.com>, Sebastian Andrzej Siewior <bigeasy@linutronix.de>, kamel.bouhara@bootlin.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com>, Rob Herring <robh+dt@kernel.org> Subject: [PATCH v4 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema Date: Sat, 30 May 2020 01:27:41 +0200 [thread overview] Message-ID: <20200529232749.299627-2-alexandre.belloni@bootlin.com> (raw) In-Reply-To: <20200529232749.299627-1-alexandre.belloni@bootlin.com> Convert Atmel Timer Counter Blocks bindings to DT schema format using json-schema. Also move it out of mfd as it is not and has never been related to mfd. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- Changes in v4: - use oneOf to describe possible clock-names list .../devicetree/bindings/mfd/atmel-tcb.txt | 56 -------- .../soc/microchip/atmel,at91rm9200-tcb.yaml | 131 ++++++++++++++++++ 2 files changed, 131 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt deleted file mode 100644 index c4a83e364cb6..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Device tree bindings for Atmel Timer Counter Blocks -- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". - <chip> can be "at91rm9200" or "at91sam9x5" -- reg: Should contain registers location and length -- #address-cells: has to be 1 -- #size-cells: has to be 0 -- interrupts: Should contain all interrupts for the TC block - Note that you can specify several interrupt cells if the TC - block has one interrupt per channel. -- clock-names: tuple listing input clock names. - Required elements: "t0_clk", "slow_clk" - Optional elements: "t1_clk", "t2_clk" -- clocks: phandles to input clocks. - -The TCB can expose multiple subdevices: - * a timer - - compatible: Should be "atmel,tcb-timer" - - reg: Should contain the TCB channels to be used. If the - counter width is 16 bits (at91rm9200-tcb), two consecutive - channels are needed. Else, only one channel will be used. - -Examples: - -One interrupt per TC block: - tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfff7c000 0x100>; - interrupts = <18 4>; - clocks = <&tcb0_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - -One interrupt per TC channel in a TC block: - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfffdc000 0x100>; - interrupts = <26 4>, <27 4>, <28 4>; - clocks = <&tcb1_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - }; - - diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file mode 100644 index 000000000000..9d680e0b9109 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Atmel Timer Counter Block + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each + timer has three channels with two counters each. + +properties: + compatible: + items: + - enum: + - atmel,at91rm9200-tcb + - atmel,at91sam9x5-tcb + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + interrupts: + description: + List of interrupts. One interrupt per TCB channel if available or one + interrupt for the TC block + minItems: 1 + maxItems: 3 + + clock-names: + description: + List of clock names. Always includes t0_clk and slow clk. Also includes + t1_clk and t2_clk if a clock per channel is available. + oneOf: + - items: + - const: t0_clk + - const: slow_clk + - items: + - const: t0_clk + - const: t1_clk + - const: t2_clk + - const: slow_clk + minItems: 2 + maxItems: 4 + + clocks: + minItems: 2 + maxItems: 4 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^timer@[0-2]$": + description: The timer block channels that are used as timers. + type: object + properties: + compatible: + const: atmel,tcb-timer + reg: + description: + List of channels to use for this particular timer. + minItems: 1 + maxItems: 3 + + required: + - compatible + - reg + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + /* One interrupt per TC block: */ + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + + /* One interrupt per TC channel in a TC block: */ + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffdc000 0x100>; + interrupts = <26 4>, <27 4>, <28 4>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: kamel.bouhara@bootlin.com, Alexandre Belloni <alexandre.belloni@bootlin.com>, devicetree@vger.kernel.org, Sebastian Andrzej Siewior <bigeasy@linutronix.de>, linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, Thomas Gleixner <tglx@linutronix.de>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema Date: Sat, 30 May 2020 01:27:41 +0200 [thread overview] Message-ID: <20200529232749.299627-2-alexandre.belloni@bootlin.com> (raw) In-Reply-To: <20200529232749.299627-1-alexandre.belloni@bootlin.com> Convert Atmel Timer Counter Blocks bindings to DT schema format using json-schema. Also move it out of mfd as it is not and has never been related to mfd. Cc: Rob Herring <robh+dt@kernel.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- Changes in v4: - use oneOf to describe possible clock-names list .../devicetree/bindings/mfd/atmel-tcb.txt | 56 -------- .../soc/microchip/atmel,at91rm9200-tcb.yaml | 131 ++++++++++++++++++ 2 files changed, 131 insertions(+), 56 deletions(-) delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-tcb.txt create mode 100644 Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml diff --git a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt b/Documentation/devicetree/bindings/mfd/atmel-tcb.txt deleted file mode 100644 index c4a83e364cb6..000000000000 --- a/Documentation/devicetree/bindings/mfd/atmel-tcb.txt +++ /dev/null @@ -1,56 +0,0 @@ -* Device tree bindings for Atmel Timer Counter Blocks -- compatible: Should be "atmel,<chip>-tcb", "simple-mfd", "syscon". - <chip> can be "at91rm9200" or "at91sam9x5" -- reg: Should contain registers location and length -- #address-cells: has to be 1 -- #size-cells: has to be 0 -- interrupts: Should contain all interrupts for the TC block - Note that you can specify several interrupt cells if the TC - block has one interrupt per channel. -- clock-names: tuple listing input clock names. - Required elements: "t0_clk", "slow_clk" - Optional elements: "t1_clk", "t2_clk" -- clocks: phandles to input clocks. - -The TCB can expose multiple subdevices: - * a timer - - compatible: Should be "atmel,tcb-timer" - - reg: Should contain the TCB channels to be used. If the - counter width is 16 bits (at91rm9200-tcb), two consecutive - channels are needed. Else, only one channel will be used. - -Examples: - -One interrupt per TC block: - tcb0: timer@fff7c000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfff7c000 0x100>; - interrupts = <18 4>; - clocks = <&tcb0_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - - timer@0 { - compatible = "atmel,tcb-timer"; - reg = <0>, <1>; - }; - - timer@2 { - compatible = "atmel,tcb-timer"; - reg = <2>; - }; - }; - -One interrupt per TC channel in a TC block: - tcb1: timer@fffdc000 { - compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0xfffdc000 0x100>; - interrupts = <26 4>, <27 4>, <28 4>; - clocks = <&tcb1_clk>, <&clk32k>; - clock-names = "t0_clk", "slow_clk"; - }; - - diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml new file mode 100644 index 000000000000..9d680e0b9109 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/soc/microchip/atmel,at91rm9200-tcb.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Atmel Timer Counter Block + +maintainers: + - Alexandre Belloni <alexandre.belloni@bootlin.com> + +description: | + The Atmel (now Microchip) SoCs have timers named Timer Counter Block. Each + timer has three channels with two counters each. + +properties: + compatible: + items: + - enum: + - atmel,at91rm9200-tcb + - atmel,at91sam9x5-tcb + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + interrupts: + description: + List of interrupts. One interrupt per TCB channel if available or one + interrupt for the TC block + minItems: 1 + maxItems: 3 + + clock-names: + description: + List of clock names. Always includes t0_clk and slow clk. Also includes + t1_clk and t2_clk if a clock per channel is available. + oneOf: + - items: + - const: t0_clk + - const: slow_clk + - items: + - const: t0_clk + - const: t1_clk + - const: t2_clk + - const: slow_clk + minItems: 2 + maxItems: 4 + + clocks: + minItems: 2 + maxItems: 4 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^timer@[0-2]$": + description: The timer block channels that are used as timers. + type: object + properties: + compatible: + const: atmel,tcb-timer + reg: + description: + List of channels to use for this particular timer. + minItems: 1 + maxItems: 3 + + required: + - compatible + - reg + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + /* One interrupt per TC block: */ + tcb0: timer@fff7c000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfff7c000 0x100>; + interrupts = <18 4>; + clocks = <&tcb0_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>, <1>; + }; + + timer@2 { + compatible = "atmel,tcb-timer"; + reg = <2>; + }; + }; + + /* One interrupt per TC channel in a TC block: */ + tcb1: timer@fffdc000 { + compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xfffdc000 0x100>; + interrupts = <26 4>, <27 4>, <28 4>; + clocks = <&tcb1_clk>, <&clk32k>; + clock-names = "t0_clk", "slow_clk"; + + timer@0 { + compatible = "atmel,tcb-timer"; + reg = <0>; + }; + + timer@1 { + compatible = "atmel,tcb-timer"; + reg = <1>; + }; + }; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-29 23:28 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-29 23:27 [PATCH v4 0/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni [this message] 2020-05-29 23:27 ` [PATCH v4 1/9] dt-bindings: atmel-tcb: convert bindings to json-schema Alexandre Belloni 2020-06-09 20:31 ` Rob Herring 2020-06-09 20:31 ` Rob Herring 2020-05-29 23:27 ` [PATCH v4 2/9] dt-bindings: microchip: atmel,at91rm9200-tcb: add sama5d2 compatible Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 2/9] dt-bindings: microchip: atmel, at91rm9200-tcb: " Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 3/9] ARM: dts: at91: sama5d2: add TCB GCLK Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 4/9] ARM: at91: add atmel tcb capabilities Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 5/9] clocksource/drivers/timer-atmel-tcb: rework 32khz clock selection Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 6/9] clocksource/drivers/timer-atmel-tcb: fill tcb_config Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 7/9] clocksource/drivers/timer-atmel-tcb: stop using the 32kHz for clockevents Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 8/9] clocksource/drivers/timer-atmel-tcb: allow selecting first divider Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni 2020-05-29 23:27 ` [PATCH v4 9/9] clocksource/drivers/timer-atmel-tcb: add sama5d2 support Alexandre Belloni 2020-05-29 23:27 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200529232749.299627-2-alexandre.belloni@bootlin.com \ --to=alexandre.belloni@bootlin.com \ --cc=bigeasy@linutronix.de \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=kamel.bouhara@bootlin.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.