[PATCH v1 4/6] drm: panel-simple: add Hitachi 3.5" QVGA panel

[Sam Ravnborg <sam@ravnborg.org>]

This panel is used on evaluation boards for Atmel at91sam9261 and
at91sam6263.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
 drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 8624bb80108c..25c96639631f 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1813,6 +1813,32 @@ static const struct panel_desc hannstar_hsd100pxn1 = {
 	.connector_type = DRM_MODE_CONNECTOR_LVDS,
 };
 
+static const struct drm_display_mode hitachi_tx09d71vm1cca_mode = {
+	.clock = 4965000,
+	.hdisplay = 240,
+	.hsync_start = 240 + 0,
+	.hsync_end = 240 + 0 + 5,
+	.htotal = 240 + 0 + 5 + 1,
+	.vdisplay = 320,
+	.vsync_start = 320 + 0,
+	.vsync_end = 320 + 0 + 1,
+	.vtotal = 320 + 0 + 1 + 1,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+};
+
+static const struct panel_desc hitachi_tx09d71vm1cca = {
+	.modes = &hitachi_tx09d71vm1cca_mode,
+	.num_modes = 1,
+	.bpc = 6,
+	.size = {
+		.width = 54,
+		.height = 72,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_NEGEDGE,
+	.connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
 static const struct drm_display_mode hitachi_tx23d38vm0caa_mode = {
 	.clock = 33333,
 	.hdisplay = 800,
@@ -3737,6 +3763,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "hannstar,hsd100pxn1",
 		.data = &hannstar_hsd100pxn1,
+	}, {
+		.compatible = "hit,tx09d71vm1cca",
+		.data = &hitachi_tx09d71vm1cca,
 	}, {
 		.compatible = "hit,tx23d38vm0caa",
 		.data = &hitachi_tx23d38vm0caa
-- 
2.25.1