All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bean Huo <huobean@gmail.com>
To: alim.akhtar@samsung.com, avri.altman@wdc.com,
	asutoshd@codeaurora.org, jejb@linux.ibm.com,
	martin.petersen@oracle.com, stanley.chu@mediatek.com,
	beanhuo@micron.com, bvanassche@acm.org, tomas.winkler@intel.com,
	cang@codeaurora.org, ebiggers@kernel.org
Cc: linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 2/2] scsi: ufs: remove wrapper function ufshcd_setup_clocks()
Date: Fri,  5 Jun 2020 22:05:20 +0200	[thread overview]
Message-ID: <20200605200520.20831-3-huobean@gmail.com> (raw)
In-Reply-To: <20200605200520.20831-1-huobean@gmail.com>

From: Bean Huo <beanhuo@micron.com>

The static function ufshcd_setup_clocks() is just a wrapper around
__ufshcd_setup_clocks(), remove it. Rename original function wrapped
__ufshcd_setup_clocks() to new ufshcd_setup_clocks().

Signed-off-by: Bean Huo <beanhuo@micron.com>
---
 drivers/scsi/ufs/ufshcd.c | 32 ++++++++++++--------------------
 1 file changed, 12 insertions(+), 20 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index ec4f55211648..531d0b7878db 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -215,9 +215,7 @@ static int ufshcd_eh_host_reset_handler(struct scsi_cmnd *cmd);
 static int ufshcd_clear_tm_cmd(struct ufs_hba *hba, int tag);
 static void ufshcd_hba_exit(struct ufs_hba *hba);
 static int ufshcd_probe_hba(struct ufs_hba *hba, bool async);
-static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
-				 bool skip_ref_clk);
-static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on);
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on, bool skip_ref_clk);
 static int ufshcd_uic_hibern8_enter(struct ufs_hba *hba);
 static inline void ufshcd_add_delay_before_dme_cmd(struct ufs_hba *hba);
 static int ufshcd_host_reset_and_restore(struct ufs_hba *hba);
@@ -1497,7 +1495,7 @@ static void ufshcd_ungate_work(struct work_struct *work)
 	}
 
 	spin_unlock_irqrestore(hba->host->host_lock, flags);
-	ufshcd_setup_clocks(hba, true);
+	ufshcd_setup_clocks(hba, true, false);
 
 	ufshcd_enable_irq(hba);
 
@@ -1655,10 +1653,10 @@ static void ufshcd_gate_work(struct work_struct *work)
 	ufshcd_disable_irq(hba);
 
 	if (!ufshcd_is_link_active(hba))
-		ufshcd_setup_clocks(hba, false);
+		ufshcd_setup_clocks(hba, false, false);
 	else
 		/* If link is active, device ref_clk can't be switched off */
-		__ufshcd_setup_clocks(hba, false, true);
+		ufshcd_setup_clocks(hba, false, true);
 
 	/*
 	 * In case you are here to cancel this work the gating state
@@ -7683,8 +7681,7 @@ static int ufshcd_init_hba_vreg(struct ufs_hba *hba)
 	return 0;
 }
 
-static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
-					bool skip_ref_clk)
+static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on, bool skip_ref_clk)
 {
 	int ret = 0;
 	struct ufs_clk_info *clki;
@@ -7747,11 +7744,6 @@ static int __ufshcd_setup_clocks(struct ufs_hba *hba, bool on,
 	return ret;
 }
 
-static int ufshcd_setup_clocks(struct ufs_hba *hba, bool on)
-{
-	return  __ufshcd_setup_clocks(hba, on, false);
-}
-
 static int ufshcd_init_clocks(struct ufs_hba *hba)
 {
 	int ret = 0;
@@ -7858,7 +7850,7 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
 	if (err)
 		goto out_disable_hba_vreg;
 
-	err = ufshcd_setup_clocks(hba, true);
+	err = ufshcd_setup_clocks(hba, true, false);
 	if (err)
 		goto out_disable_hba_vreg;
 
@@ -7880,7 +7872,7 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
 out_disable_vreg:
 	ufshcd_setup_vreg(hba, false);
 out_disable_clks:
-	ufshcd_setup_clocks(hba, false);
+	ufshcd_setup_clocks(hba, false, false);
 out_disable_hba_vreg:
 	ufshcd_setup_hba_vreg(hba, false);
 out:
@@ -7896,7 +7888,7 @@ static void ufshcd_hba_exit(struct ufs_hba *hba)
 		if (ufshcd_is_clkscaling_supported(hba))
 			if (hba->devfreq)
 				ufshcd_suspend_clkscaling(hba);
-		ufshcd_setup_clocks(hba, false);
+		ufshcd_setup_clocks(hba, false, false);
 		ufshcd_setup_hba_vreg(hba, false);
 		hba->is_powered = false;
 		ufs_put_device_desc(hba);
@@ -8259,10 +8251,10 @@ static int ufshcd_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	ufshcd_disable_irq(hba);
 
 	if (!ufshcd_is_link_active(hba))
-		ufshcd_setup_clocks(hba, false);
+		ufshcd_setup_clocks(hba, false, false);
 	else
 		/* If link is active, device ref_clk can't be switched off */
-		__ufshcd_setup_clocks(hba, false, true);
+		ufshcd_setup_clocks(hba, false, true);
 
 	hba->clk_gating.state = CLKS_OFF;
 	trace_ufshcd_clk_gating(dev_name(hba->dev), hba->clk_gating.state);
@@ -8321,7 +8313,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 
 	ufshcd_hba_vreg_set_hpm(hba);
 	/* Make sure clocks are enabled before accessing controller */
-	ret = ufshcd_setup_clocks(hba, true);
+	ret = ufshcd_setup_clocks(hba, true, false);
 	if (ret)
 		goto out;
 
@@ -8404,7 +8396,7 @@ static int ufshcd_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
 	ufshcd_disable_irq(hba);
 	if (hba->clk_scaling.is_allowed)
 		ufshcd_suspend_clkscaling(hba);
-	ufshcd_setup_clocks(hba, false);
+	ufshcd_setup_clocks(hba, false, false);
 out:
 	hba->pm_op_in_progress = 0;
 	if (ret)
-- 
2.17.1


  parent reply	other threads:[~2020-06-05 20:05 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-05 20:05 [PATCH v3 0/2] scsi: ufs: cleanup UFS driver Bean Huo
2020-06-05 20:05 ` [PATCH v3 1/2] scsi: ufs: Add SPDX GPL-2.0 to replace GPL v2 boilerplate Bean Huo
2020-06-06 23:20   ` Winkler, Tomas
2020-06-10  9:30     ` Bean Huo
2020-06-10 10:33       ` Winkler, Tomas
2020-06-11 15:52   ` Alim Akhtar
2020-06-05 20:05 ` Bean Huo [this message]
2020-06-06 23:28   ` [PATCH v3 2/2] scsi: ufs: remove wrapper function ufshcd_setup_clocks() Winkler, Tomas
2020-06-11 16:00     ` Alim Akhtar
2020-06-16  3:59 ` [PATCH v3 0/2] scsi: ufs: cleanup UFS driver Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200605200520.20831-3-huobean@gmail.com \
    --to=huobean@gmail.com \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=cang@codeaurora.org \
    --cc=ebiggers@kernel.org \
    --cc=jejb@linux.ibm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=stanley.chu@mediatek.com \
    --cc=tomas.winkler@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.