All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
	sakari.ailus@linux.intel.com, laurent.pinchart@ideasonboard.com
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>,
	niklas.soderlund+renesas@ragnatech.se,
	kieran.bingham@ideasonboard.com, dave.stevenson@raspberrypi.com,
	hyun.kwon@xilinx.com, linux-media@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Subject: [PATCH v5 07/10] media: i2c: adv748x: Adjust TXA data lanes number
Date: Tue, 16 Jun 2020 16:12:42 +0200	[thread overview]
Message-ID: <20200616141244.49407-8-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20200616141244.49407-1-jacopo+renesas@jmondi.org>

When outputting SD-Core output through the TXA MIPI CSI-2 interface,
the number of enabled data lanes should be reduced in order to guarantee
that the two video formats produced by the SD-Core (480i and 576i)
generate a MIPI CSI-2 link clock frequency compatible with the MIPI D-PHY
specifications.

Limit the number of enabled data lanes to 2, which is guaranteed to
support 480i and 576i formats.

Cache the number of enabled data lanes to be able to report it through
the new get_mbus_config operation.

Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 drivers/media/i2c/adv748x/adv748x-core.c | 31 ++++++++++++++++++------
 drivers/media/i2c/adv748x/adv748x.h      |  1 +
 2 files changed, 25 insertions(+), 7 deletions(-)

diff --git a/drivers/media/i2c/adv748x/adv748x-core.c b/drivers/media/i2c/adv748x/adv748x-core.c
index 23e02ff27b17..1fe7f97c6d52 100644
--- a/drivers/media/i2c/adv748x/adv748x-core.c
+++ b/drivers/media/i2c/adv748x/adv748x-core.c
@@ -241,10 +241,10 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
 	int ret = 0;
 
 	/* Enable n-lane MIPI */
-	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
 
 	/* Set Auto DPHY Timing */
-	adv748x_write_check(state, page, 0x00, 0xa0 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0xa0 | tx->active_lanes, &ret);
 
 	/* ADI Required Write */
 	if (tx->src == &state->hdmi.sd) {
@@ -270,7 +270,7 @@ static int adv748x_power_up_tx(struct adv748x_csi2 *tx)
 	usleep_range(2000, 2500);
 
 	/* Power-up CSI-TX */
-	adv748x_write_check(state, page, 0x00, 0x20 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0x20 | tx->active_lanes, &ret);
 	usleep_range(1000, 1500);
 
 	/* ADI Required Writes */
@@ -292,7 +292,7 @@ static int adv748x_power_down_tx(struct adv748x_csi2 *tx)
 	adv748x_write_check(state, page, 0x1e, 0x00, &ret);
 
 	/* Enable n-lane MIPI */
-	adv748x_write_check(state, page, 0x00, 0x80 | tx->num_lanes, &ret);
+	adv748x_write_check(state, page, 0x00, 0x80 | tx->active_lanes, &ret);
 
 	/* i2c_mipi_pll_en - 1'b1 */
 	adv748x_write_check(state, page, 0xda, 0x01, &ret);
@@ -357,14 +357,29 @@ static int adv748x_link_setup(struct media_entity *entity,
 	if (state->afe.tx) {
 		/* AFE Requires TXA enabled, even when output to TXB */
 		io10 |= ADV748X_IO_10_CSI4_EN;
-		if (is_txa(tx))
+		if (is_txa(tx)) {
+			/*
+			 * Output from the SD-core (480i and 576i) from the TXA
+			 * interface requires reducing the number of enabled
+			 * data lanes in order to guarantee a valid link
+			 * frequency.
+			 */
+			tx->active_lanes = min(tx->num_lanes, 2U);
 			io10 |= ADV748X_IO_10_CSI4_IN_SEL_AFE;
-		else
+		} else {
+			/* TXB has a single data lane, no need to adjust. */
 			io10 |= ADV748X_IO_10_CSI1_EN;
+		}
 	}
 
-	if (state->hdmi.tx)
+	if (state->hdmi.tx) {
+		/*
+		 * Restore the number of active lanes, in case we have gone
+		 * through an AFE->TXA streaming sessions.
+		 */
+		tx->active_lanes = tx->num_lanes;
 		io10 |= ADV748X_IO_10_CSI4_EN;
+	}
 
 	return io_clrset(state, ADV748X_IO_10, io10_mask, io10);
 }
@@ -596,6 +611,7 @@ static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
 		}
 
 		state->txa.num_lanes = num_lanes;
+		state->txa.active_lanes = num_lanes;
 		adv_dbg(state, "TXA: using %u lanes\n", state->txa.num_lanes);
 	}
 
@@ -607,6 +623,7 @@ static int adv748x_parse_csi2_lanes(struct adv748x_state *state,
 		}
 
 		state->txb.num_lanes = num_lanes;
+		state->txb.active_lanes = num_lanes;
 		adv_dbg(state, "TXB: using %u lanes\n", state->txb.num_lanes);
 	}
 
diff --git a/drivers/media/i2c/adv748x/adv748x.h b/drivers/media/i2c/adv748x/adv748x.h
index fccb388ce179..1061f425ece5 100644
--- a/drivers/media/i2c/adv748x/adv748x.h
+++ b/drivers/media/i2c/adv748x/adv748x.h
@@ -79,6 +79,7 @@ struct adv748x_csi2 {
 	unsigned int page;
 	unsigned int port;
 	unsigned int num_lanes;
+	unsigned int active_lanes;
 
 	struct media_pad pads[ADV748X_CSI2_NR_PADS];
 	struct v4l2_ctrl_handler ctrl_hdl;
-- 
2.27.0


  parent reply	other threads:[~2020-06-16 14:09 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16 14:12 [PATCH v5 0/9] v4l2-subdev: Introduce [g|s]et_mbus_format pad op Jacopo Mondi
2020-06-16 14:12 ` [PATCH v5 01/10] media: v4l2-subdev: Introduce [get|set]_mbus_config pad ops Jacopo Mondi
2020-06-16 14:12 ` [PATCH v5 02/10] media: i2c: Use the new get_mbus_config pad op Jacopo Mondi
2020-06-16 14:12 ` [PATCH v5 03/10] media: i2c: ov6650: Use new [get|set]_mbus_config ops Jacopo Mondi
2020-06-18 13:21   ` Jacopo Mondi
2020-06-21 11:38   ` Janusz Krzysztofik
2020-06-24  8:11     ` Jacopo Mondi
2020-06-24  9:55       ` Hans Verkuil
2020-06-16 14:12 ` [PATCH v5 04/10] media: pxa_camera: Use the new set_mbus_config op Jacopo Mondi
2020-06-16 14:12 ` [PATCH v5 05/10] media: v4l2-subdev: Remove [s|g]_mbus_config video ops Jacopo Mondi
2020-06-16 14:12 ` [PATCH v5 06/10] staging: media: imx: Update TODO entry Jacopo Mondi
2020-06-16 14:12 ` Jacopo Mondi [this message]
2020-06-16 14:12 ` [PATCH v5 08/10] media: i2c: adv748x: Implement get_mbus_config Jacopo Mondi
2020-06-16 14:12 ` [PATCH v5 09/10] media: rcar-csi2: Negotiate data lanes number Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200616141244.49407-8-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=dave.stevenson@raspberrypi.com \
    --cc=hverkuil-cisco@xs4all.nl \
    --cc=hyun.kwon@xilinx.com \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    --cc=sakari.ailus@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.