All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Zhang Rui <rui.zhang@intel.com>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Amit Kucheria <amit.kucheria@verdurent.com>,
	Jonathan Cameron <jic23@kernel.org>,
	Hartmut Knaack <knaack.h@gmx.de>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Peter Meerwald-Stadler <pmeerw@pmeerw.net>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	Vinod Koul <vkoul@kernel.org>,
	linux-iio@vger.kernel.org
Subject: [PATCH 4/5] arm64: dts: qcom: pm8150x: add definitions for adc-tm5 part
Date: Sun, 21 Jun 2020 22:35:48 +0300	[thread overview]
Message-ID: <20200621193549.2070434-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20200621193549.2070434-1-dmitry.baryshkov@linaro.org>

Define adc-tm5 thermal monitoring part. Individual channes and thermal
zones are to be configured in per-device dts files.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm8150.dtsi  | 10 ++++++++++
 arch/arm64/boot/dts/qcom/pm8150b.dtsi | 10 ++++++++++
 arch/arm64/boot/dts/qcom/pm8150l.dtsi | 10 ++++++++++
 3 files changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
index 027f55d53584..acb2cb02a73b 100644
--- a/arch/arm64/boot/dts/qcom/pm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -97,6 +97,16 @@ die-temp@6 {
 			};
 		};
 
+		pm8150_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		rtc@6000 {
 			compatible = "qcom,pm8941-rtc";
 			reg = <0x6000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150b.dtsi b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
index e112e8876db6..8e2f3250c914 100644
--- a/arch/arm64/boot/dts/qcom/pm8150b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150b.dtsi
@@ -95,6 +95,16 @@ chg-temp@9 {
 			};
 		};
 
+		pm8150b_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x2 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm8150b_gpios: gpio@c000 {
 			compatible = "qcom,pm8150b-gpio";
 			reg = <0xc000>;
diff --git a/arch/arm64/boot/dts/qcom/pm8150l.dtsi b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
index 62139538b7d9..9f214ceec2b7 100644
--- a/arch/arm64/boot/dts/qcom/pm8150l.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8150l.dtsi
@@ -89,6 +89,16 @@ die-temp@6 {
 			};
 		};
 
+		pm8150l_adc_tm: adc-tm@3500 {
+			compatible = "qcom,spmi-adc-tm5";
+			reg = <0x3500>;
+			interrupts = <0x4 0x35 0x0 IRQ_TYPE_EDGE_RISING>;
+			#thermal-sensor-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pm8150l_gpios: gpio@c000 {
 			compatible = "qcom,pm8150l-gpio";
 			reg = <0xc000>;
-- 
2.27.0


  parent reply	other threads:[~2020-06-21 19:36 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-21 19:35 [PATCH 0/5] qcom: pm8150: add support for thermal monitoring Dmitry Baryshkov
2020-06-21 19:35 ` [PATCH 1/5] dt-bindings: thermal: qcom: add adc-thermal monitor bindings Dmitry Baryshkov
2020-06-29 21:57   ` Rob Herring
2020-06-21 19:35 ` [PATCH 2/5] iio: adc: qcom-vadc: move several adc5 functions to common file Dmitry Baryshkov
2020-06-21 19:43   ` Bjorn Andersson
2020-06-21 19:35 ` [PATCH 3/5] thermal: qcom: add support for adc-tm5 PMIC thermal monitor Dmitry Baryshkov
2020-06-22  5:39   ` Bjorn Andersson
2020-06-27 14:42   ` Jonathan Cameron
2020-06-21 19:35 ` Dmitry Baryshkov [this message]
2020-06-21 19:35 ` [PATCH 5/5] arm64: dts: sm8250-dts: add thermal zones using pmic's adc-tm5 Dmitry Baryshkov
2020-06-29 22:12   ` kernel test robot
2020-06-30  5:06   ` Amit Kucheria
2020-06-30 12:10     ` Dmitry Baryshkov
2020-07-01  6:05       ` Amit Kucheria
2020-07-01 10:56         ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200621193549.2070434-5-dmitry.baryshkov@linaro.org \
    --to=dmitry.baryshkov@linaro.org \
    --cc=agross@kernel.org \
    --cc=amit.kucheria@verdurent.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=knaack.h@gmx.de \
    --cc=lars@metafoo.de \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=pmeerw@pmeerw.net \
    --cc=robh+dt@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.