All of lore.kernel.org
 help / color / mirror / Atom feed
From: James Morse <james.morse@arm.com>
To: kvmarm@lists.cs.columbia.edu, linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <maz@kernel.org>
Subject: [PATCH 3/5] KVM: arm64: Move ACTLR_EL1 emulation to the sys_reg_descs array
Date: Mon, 22 Jun 2020 11:33:15 +0000	[thread overview]
Message-ID: <20200622113317.20477-4-james.morse@arm.com> (raw)
In-Reply-To: <20200622113317.20477-1-james.morse@arm.com>

The only entry in the genericv8_sys_regs arrays is for emulation of
ACTLR_EL1. As all targets emulate this in the same way, move it to
sys_reg_descs[].

Signed-off-by: James Morse <james.morse@arm.com>
---
 arch/arm64/kvm/sys_regs.c            | 28 ++++++++++++++++++++++++++
 arch/arm64/kvm/sys_regs_generic_v8.c | 30 ----------------------------
 2 files changed, 28 insertions(+), 30 deletions(-)

diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index fb448bfc83ec..f8407cfa9032 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -242,6 +242,25 @@ static bool access_vm_reg(struct kvm_vcpu *vcpu,
 	return true;
 }
 
+static bool access_actlr(struct kvm_vcpu *vcpu,
+			 struct sys_reg_params *p,
+			 const struct sys_reg_desc *r)
+{
+	if (p->is_write)
+		return ignore_write(vcpu, p);
+
+	p->regval = vcpu_read_sys_reg(vcpu, ACTLR_EL1);
+
+	if (p->is_aarch32) {
+		if (r->Op2 & 2)
+			p->regval = upper_32_bits(p->regval);
+		else
+			p->regval = lower_32_bits(p->regval);
+	}
+
+	return true;
+}
+
 /*
  * Trap handler for the GICv3 SGI generation system register.
  * Forward the request to the VGIC emulation.
@@ -615,6 +634,12 @@ static void reset_amair_el1(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 	vcpu_write_sys_reg(vcpu, amair, AMAIR_EL1);
 }
 
+static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 actlr = read_sysreg(actlr_el1);
+	vcpu_write_sys_reg(vcpu, actlr, ACTLR_EL1);
+}
+
 static void reset_mpidr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 mpidr;
@@ -1518,6 +1543,7 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	ID_UNALLOCATED(7,7),
 
 	{ SYS_DESC(SYS_SCTLR_EL1), access_vm_reg, reset_val, SCTLR_EL1, 0x00C50078 },
+	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 	{ SYS_DESC(SYS_CPACR_EL1), NULL, reset_val, CPACR_EL1, 0 },
 	{ SYS_DESC(SYS_ZCR_EL1), NULL, reset_val, ZCR_EL1, 0, .visibility = sve_visibility },
 	{ SYS_DESC(SYS_TTBR0_EL1), access_vm_reg, reset_unknown, TTBR0_EL1 },
@@ -1957,6 +1983,8 @@ static const struct sys_reg_desc cp14_64_regs[] = {
 static const struct sys_reg_desc cp15_regs[] = {
 	{ Op1( 0), CRn( 0), CRm( 0), Op2( 1), access_ctr },
 	{ Op1( 0), CRn( 1), CRm( 0), Op2( 0), access_vm_reg, NULL, c1_SCTLR },
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 1), access_actlr },
+	{ Op1( 0), CRn( 1), CRm( 0), Op2( 3), access_actlr },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 0), access_vm_reg, NULL, c2_TTBR0 },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 1), access_vm_reg, NULL, c2_TTBR1 },
 	{ Op1( 0), CRn( 2), CRm( 0), Op2( 2), access_vm_reg, NULL, c2_TTBCR },
diff --git a/arch/arm64/kvm/sys_regs_generic_v8.c b/arch/arm64/kvm/sys_regs_generic_v8.c
index a82cc2ccfd44..a7e21e61beea 100644
--- a/arch/arm64/kvm/sys_regs_generic_v8.c
+++ b/arch/arm64/kvm/sys_regs_generic_v8.c
@@ -19,44 +19,14 @@
 
 #include "sys_regs.h"
 
-static bool access_actlr(struct kvm_vcpu *vcpu,
-			 struct sys_reg_params *p,
-			 const struct sys_reg_desc *r)
-{
-	if (p->is_write)
-		return ignore_write(vcpu, p);
-
-	p->regval = vcpu_read_sys_reg(vcpu, ACTLR_EL1);
-
-	if (p->is_aarch32) {
-		if (r->Op2 & 2)
-			p->regval = upper_32_bits(p->regval);
-		else
-			p->regval = lower_32_bits(p->regval);
-	}
-
-	return true;
-}
-
-static void reset_actlr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
-{
-	__vcpu_sys_reg(vcpu, ACTLR_EL1) = read_sysreg(actlr_el1);
-}
-
 /*
  * Implementation specific sys-reg registers.
  * Important: Must be sorted ascending by Op0, Op1, CRn, CRm, Op2
  */
 static const struct sys_reg_desc genericv8_sys_regs[] = {
-	{ SYS_DESC(SYS_ACTLR_EL1), access_actlr, reset_actlr, ACTLR_EL1 },
 };
 
 static const struct sys_reg_desc genericv8_cp15_regs[] = {
-	/* ACTLR */
-	{ Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b001),
-	  access_actlr },
-	{ Op1(0b000), CRn(0b0001), CRm(0b0000), Op2(0b011),
-	  access_actlr },
 };
 
 struct kvm_sys_reg_target_table genericv8_target_table = {
-- 
2.20.1

_______________________________________________
kvmarm mailing list
kvmarm@lists.cs.columbia.edu
https://lists.cs.columbia.edu/mailman/listinfo/kvmarm

  parent reply	other threads:[~2020-06-22 11:33 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-22 11:33 [PATCH 0/5] KVM: arm64: Remove the target table James Morse
2020-06-22 11:33 ` [PATCH 1/5] KVM: arm64: Drop the target_table[] indirection James Morse
2020-06-22 11:33 ` [PATCH 2/5] KVM: arm64: Tolerate an empty target_table list James Morse
2020-06-22 11:33 ` James Morse [this message]
2020-06-22 11:33 ` [PATCH 4/5] KVM: arm64: Remove target_table from exit handlers James Morse
2020-06-22 11:33 ` [PATCH 5/5] KVM: arm64: Remove the target table James Morse
2020-07-05 17:51 ` [PATCH 0/5] " Marc Zyngier
2020-07-05 17:51   ` Marc Zyngier
2020-07-05 17:51   ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200622113317.20477-4-james.morse@arm.com \
    --to=james.morse@arm.com \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=maz@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.