From: Katsuhiro Suzuki <katsuhiro@katsuster.net> To: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org Cc: Heiko Stuebner <heiko@sntech.de>, alsa-devel@alsa-project.org, linux-rockchip@lists.infradead.org, linux-arm-kernel@lists.infradead.org, Katsuhiro Suzuki <katsuhiro@katsuster.net> Subject: [PATCH 1/2] dt-bindings: sound: convert rk3328 codec binding to yaml Date: Tue, 23 Jun 2020 21:47:33 +0900 [thread overview] Message-ID: <20200623124734.1736470-1-katsuhiro@katsuster.net> (raw) Just convert Rockchip rk3328 audio codec binding to DT schema. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> --- .../bindings/sound/rockchip,rk3328-codec.txt | 28 --------- .../bindings/sound/rockchip,rk3328-codec.yaml | 61 +++++++++++++++++++ 2 files changed, 61 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt deleted file mode 100644 index 1ecd75d2032a..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Rockchip Rk3328 internal codec - -Required properties: - -- compatible: "rockchip,rk3328-codec" -- reg: physical base address of the controller and length of memory mapped - region. -- rockchip,grf: the phandle of the syscon node for GRF register. -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should be "pclk". -- spk-depop-time-ms: speak depop time msec. - -Optional properties: - -- mute-gpios: GPIO specifier for external line driver control (typically the - dedicated GPIO_MUTE pin) - -Example for rk3328 internal codec: - -codec: codec@ff410000 { - compatible = "rockchip,rk3328-codec"; - reg = <0x0 0xff410000 0x0 0x1000>; - rockchip,grf = <&grf>; - clocks = <&cru PCLK_ACODEC>; - clock-names = "pclk"; - mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; - spk-depop-time-ms = 100; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml new file mode 100644 index 000000000000..08a74e28e483 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,rk3328-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3328 internal codec + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3328-codec + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for audio codec + + clock-names: + items: + - const: pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + + spk-depop-time-ms: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 200 + description: + Speaker depop time in msec. + + mute-gpios: + maxItems: 1 + description: + GPIO specifier for external line driver control (typically the + dedicated GPIO_MUTE pin) + +required: + - compatible + - reg + - clocks + - clock-names + - rockchip,grf + +examples: + - | + codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0xff410000 0x1000>; + clocks = <&cru PCLK_ACODEC>; + clock-names = "pclk"; + rockchip,grf = <&grf>; + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; + spk-depop-time-ms = 100; + }; -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Katsuhiro Suzuki <katsuhiro@katsuster.net> To: Rob Herring <robh+dt@kernel.org>, devicetree@vger.kernel.org Cc: Katsuhiro Suzuki <katsuhiro@katsuster.net>, linux-rockchip@lists.infradead.org, alsa-devel@alsa-project.org, Heiko Stuebner <heiko@sntech.de>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] dt-bindings: sound: convert rk3328 codec binding to yaml Date: Tue, 23 Jun 2020 21:47:33 +0900 [thread overview] Message-ID: <20200623124734.1736470-1-katsuhiro@katsuster.net> (raw) Just convert Rockchip rk3328 audio codec binding to DT schema. Signed-off-by: Katsuhiro Suzuki <katsuhiro@katsuster.net> --- .../bindings/sound/rockchip,rk3328-codec.txt | 28 --------- .../bindings/sound/rockchip,rk3328-codec.yaml | 61 +++++++++++++++++++ 2 files changed, 61 insertions(+), 28 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt create mode 100644 Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt deleted file mode 100644 index 1ecd75d2032a..000000000000 --- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.txt +++ /dev/null @@ -1,28 +0,0 @@ -* Rockchip Rk3328 internal codec - -Required properties: - -- compatible: "rockchip,rk3328-codec" -- reg: physical base address of the controller and length of memory mapped - region. -- rockchip,grf: the phandle of the syscon node for GRF register. -- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should be "pclk". -- spk-depop-time-ms: speak depop time msec. - -Optional properties: - -- mute-gpios: GPIO specifier for external line driver control (typically the - dedicated GPIO_MUTE pin) - -Example for rk3328 internal codec: - -codec: codec@ff410000 { - compatible = "rockchip,rk3328-codec"; - reg = <0x0 0xff410000 0x0 0x1000>; - rockchip,grf = <&grf>; - clocks = <&cru PCLK_ACODEC>; - clock-names = "pclk"; - mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; - spk-depop-time-ms = 100; -}; diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml new file mode 100644 index 000000000000..08a74e28e483 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rockchip,rk3328-codec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip rk3328 internal codec + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + const: rockchip,rk3328-codec + + reg: + maxItems: 1 + + clocks: + items: + - description: clock for audio codec + + clock-names: + items: + - const: pclk + + rockchip,grf: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle of the syscon node for the GRF register. + + spk-depop-time-ms: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 200 + description: + Speaker depop time in msec. + + mute-gpios: + maxItems: 1 + description: + GPIO specifier for external line driver control (typically the + dedicated GPIO_MUTE pin) + +required: + - compatible + - reg + - clocks + - clock-names + - rockchip,grf + +examples: + - | + codec: codec@ff410000 { + compatible = "rockchip,rk3328-codec"; + reg = <0xff410000 0x1000>; + clocks = <&cru PCLK_ACODEC>; + clock-names = "pclk"; + rockchip,grf = <&grf>; + mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>; + spk-depop-time-ms = 100; + }; -- 2.27.0
next reply other threads:[~2020-06-23 13:42 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-23 12:47 Katsuhiro Suzuki [this message] 2020-06-23 12:47 ` [PATCH 1/2] dt-bindings: sound: convert rk3328 codec binding to yaml Katsuhiro Suzuki 2020-06-23 12:47 ` [PATCH 2/2] dt-bindings: sound: add missing clock description of rk3328 DT schema Katsuhiro Suzuki 2020-06-23 12:47 ` Katsuhiro Suzuki 2020-06-29 22:00 ` [PATCH 1/2] dt-bindings: sound: convert rk3328 codec binding to yaml Rob Herring 2020-06-29 22:00 ` Rob Herring 2020-06-29 22:00 ` Rob Herring 2020-06-29 22:00 ` Rob Herring 2020-06-30 13:54 ` Katsuhiro Suzuki 2020-06-30 13:54 ` Katsuhiro Suzuki 2020-06-30 13:54 ` Katsuhiro Suzuki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200623124734.1736470-1-katsuhiro@katsuster.net \ --to=katsuhiro@katsuster.net \ --cc=alsa-devel@alsa-project.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.