All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Jassi Brar <jassisinghbrar@gmail.com>,
	Kees Cook <keescook@chromium.org>,
	Anton Vorontsov <anton@enomsg.org>,
	Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
	Sivaprakash Murugesan <sivaprak@codeaurora.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v3 7/8] arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
Date: Wed, 24 Jun 2020 17:01:05 +0200	[thread overview]
Message-ID: <20200624150107.76234-8-konradybcio@gmail.com> (raw)
In-Reply-To: <20200624150107.76234-1-konradybcio@gmail.com>

This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 .../dts/qcom/msm8992-bullhead-rev-101.dts     | 225 ++++++++++++++-
 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
 2 files changed, 224 insertions(+), 269 deletions(-)
 delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi

diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..a2de69292d28 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -47,4 +47,227 @@ ramoops@1ff00000 {
 	};
 };
 
-#include "msm8994-smd-rpm.dtsi"
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s1>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			regulator-min-microvolt = <800000>;
+			regulator-max-microvolt = <800000>;
+		};
+
+		pm8994_s2: s2 {
+			/* TODO */
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* TODO */
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* TODO */
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3100000>;
+			regulator-max-microvolt = <3100000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l26: l26 {
+			/* TODO: value from downstream
+			regulator-min-microvolt = <987500>;
+			fails to apply */
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			/* TODO: Unsupported voltage range.
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			qcom,init-voltage = <2800000>;
+			*/
+		};
+
+		pm8994_l30: l30 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			/* TODO: get this verified
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,init-voltage = <1800000>;
+			*/
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
-	rpm {
-		rpm_requests {
-			pm8994-regulators {
-
-				vdd_l1-supply = <&pm8994_s1>;
-				vdd_l2_26_28-supply = <&pm8994_s3>;
-				vdd_l3_11-supply = <&pm8994_s3>;
-				vdd_l4_27_31-supply = <&pm8994_s3>;
-				vdd_l5_7-supply = <&pm8994_s3>;
-				vdd_l6_12_32-supply = <&pm8994_s5>;
-				vdd_l8_16_30-supply = <&vreg_vph_pwr>;
-				vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
-				vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
-				vdd_l14_15-supply = <&pm8994_s5>;
-				vdd_l17_29-supply = <&vreg_vph_pwr>;
-				vdd_l20_21-supply = <&vreg_vph_pwr>;
-				vdd_l25-supply = <&pm8994_s5>;
-				vdd_lvs1_2 = <&pm8994_s4>;
-
-				s1 {
-					regulator-min-microvolt = <800000>;
-					regulator-max-microvolt = <800000>;
-				};
-
-				s2 {
-					/* TODO */
-				};
-
-				s3 {
-					regulator-min-microvolt = <1300000>;
-					regulator-max-microvolt = <1300000>;
-				};
-
-				s4 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-allow-set-load;
-					regulator-system-load = <325000>;
-				};
-
-				s5 {
-					regulator-min-microvolt = <2150000>;
-					regulator-max-microvolt = <2150000>;
-				};
-
-				s7 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l1 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-				};
-
-				l2 {
-					regulator-min-microvolt = <1250000>;
-					regulator-max-microvolt = <1250000>;
-				};
-
-				l3 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-				};
-
-				l4 {
-					regulator-min-microvolt = <1225000>;
-					regulator-max-microvolt = <1225000>;
-				};
-
-				l5 {
-					/* TODO */
-				};
-
-				l6 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l7 {
-					/* TODO */
-				};
-
-				l8 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l9 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				l10 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l11 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-				};
-
-				l12 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					proxy-supply = <&pm8994_l12>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l13 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <2950000>;
-					qcom,init-voltage = <2950000>;
-					status = "okay";
-				};
-
-				l14 {
-					regulator-min-microvolt = <1200000>;
-					regulator-max-microvolt = <1200000>;
-					qcom,init-voltage = <1200000>;
-					proxy-supply = <&pm8994_l14>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-					status = "okay";
-				};
-
-				l15 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l16 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l17 {
-					regulator-min-microvolt = <2700000>;
-					regulator-max-microvolt = <2700000>;
-					qcom,init-voltage = <2700000>;
-					status = "okay";
-				};
-
-				l18 {
-					regulator-min-microvolt = <3000000>;
-					regulator-max-microvolt = <3000000>;
-					regulator-always-on;
-					qcom,init-voltage = <3000000>;
-					qcom,init-ldo-mode = <1>;
-				};
-
-				l19 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					status = "okay";
-				};
-
-				l20 {
-					regulator-min-microvolt = <2950000>;
-					regulator-max-microvolt = <2950000>;
-					regulator-always-on;
-					regulator-boot-on;
-					regulator-allow-set-load;
-					regulator-system-load = <570000>;
-				};
-
-				l21 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l22 {
-					regulator-min-microvolt = <3100000>;
-					regulator-max-microvolt = <3100000>;
-					qcom,init-voltage = <3100000>;
-				};
-
-				l23 {
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-				};
-
-				l24 {
-					regulator-min-microvolt = <3075000>;
-					regulator-max-microvolt = <3150000>;
-					qcom,init-voltage = <3075000>;
-				};
-
-				l25 {
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-				};
-
-				l26 {
-					/* TODO: value from downstream
-					regulator-min-microvolt = <987500>;
-					fails to apply */
-				};
-
-				l27 {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1050000>;
-					qcom,init-voltage = <1050000>;
-				};
-
-				l28 {
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
-					qcom,init-voltage = <1000000>;
-					proxy-supply = <&pm8994_l28>;
-					qcom,proxy-consumer-enable;
-					qcom,proxy-consumer-current = <10000>;
-				};
-
-				l29 {
-					/* TODO: Unsupported voltage range.
-					regulator-min-microvolt = <2800000>;
-					regulator-max-microvolt = <2800000>;
-					qcom,init-voltage = <2800000>;
-					*/
-				};
-
-				l30 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-
-				l31 {
-					regulator-min-microvolt = <1262500>;
-					regulator-max-microvolt = <1262500>;
-					qcom,init-voltage = <1262500>;
-				};
-
-				l32 {
-					/* TODO: get this verified
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					qcom,init-voltage = <1800000>;
-					*/
-				};
-			};
-		};
-	};
-};
-- 
2.27.0


  parent reply	other threads:[~2020-06-24 15:03 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-24 15:00 [PATCH v3 0/8] MSM8994 peripheral enablement, DTS updates Konrad Dybcio
2020-06-24 15:00 ` [PATCH v3 1/8] firmware: qcom_scm: Add msm8994 compatible Konrad Dybcio
2020-07-13 19:01   ` Rob Herring
2020-06-24 15:01 ` [PATCH v3 2/8] arm64: dts: qcom: msm8994: Add SCM node Konrad Dybcio
2020-06-24 15:01 ` [PATCH v3 3/8] arm64: dts: qcom: msm8992: Add a label to rpm-requests Konrad Dybcio
2020-06-24 15:01 ` [PATCH v3 4/8] arm64: dts: qcom: msm8992: Remove regulators from SoC DTSI Konrad Dybcio
2020-06-24 15:01 ` [PATCH v3 5/8] mailbox: qcom: Add msm8994 apcs compatible Konrad Dybcio
2020-07-13 19:02   ` Rob Herring
2020-07-13 19:36   ` Bjorn Andersson
2020-06-24 15:01 ` [PATCH v3 6/8] arm64: dts: qcom: msm8994: Add support for SMD RPM Konrad Dybcio
2020-06-24 15:01 ` Konrad Dybcio [this message]
2020-06-24 15:01 ` [PATCH v3 8/8] arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200624150107.76234-8-konradybcio@gmail.com \
    --to=konradybcio@gmail.com \
    --cc=agross@kernel.org \
    --cc=anton@enomsg.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=ccross@android.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jassisinghbrar@gmail.com \
    --cc=keescook@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=sivaprak@codeaurora.org \
    --cc=skrzynka@konradybcio.pl \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.