From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com> Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>, <robh@kernel.org>, <devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH v5 7/7] dt-bindings: tas2562: Convert the tas2562 binding to yaml Date: Wed, 24 Jun 2020 11:14:59 -0500 [thread overview] Message-ID: <20200624161459.19248-8-dmurphy@ti.com> (raw) In-Reply-To: <20200624161459.19248-1-dmurphy@ti.com> Convert the TAS2562 text file to yaml format. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/sound/tas2562.txt | 37 --------- .../devicetree/bindings/sound/tas2562.yaml | 77 +++++++++++++++++++ 2 files changed, 77 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt deleted file mode 100644 index dc6d7362ded7..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2562.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2562 Smart PA - -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - compatible: - Should contain "ti,tas2562", "ti,tas2563". - - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be - greater then ti,imon-slot-no. - -Optional properties: -- interrupt-parent: phandle to the interrupt controller which provides - the interrupt. -- interrupts: (GPIO) interrupt to which the chip is connected. -- shut-down-gpio: GPIO used to control the state of the device. - -Examples: -tas2562@4c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tas2562"; - reg = <0x4c>; - - interrupt-parent = <&gpio1>; - interrupts = <14>; - - shut-down-gpio = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <1>; -}; - diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml new file mode 100644 index 000000000000..1fb467e14d4c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2562.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2562 Smart PA + +maintainers: + - Dan Murphy <dmurphy@ti.com> + +description: | + The TAS2562 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2562 + - ti,tas2563 + + reg: + maxItems: 1 + description: | + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + shut-down-gpio: + description: GPIO used to control the state of the device. + deprecated: true + + shutdown-gpio: + description: GPIO used to control the state of the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TDM TX voltage sense time slot. This slot must always be greater then + ti,imon-slot-no. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tas2562"; + reg = <0x4c>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + shutdown-gpio = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + +... -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com> Cc: robh@kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Dan Murphy <dmurphy@ti.com>, devicetree@vger.kernel.org Subject: [PATCH v5 7/7] dt-bindings: tas2562: Convert the tas2562 binding to yaml Date: Wed, 24 Jun 2020 11:14:59 -0500 [thread overview] Message-ID: <20200624161459.19248-8-dmurphy@ti.com> (raw) In-Reply-To: <20200624161459.19248-1-dmurphy@ti.com> Convert the TAS2562 text file to yaml format. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- .../devicetree/bindings/sound/tas2562.txt | 37 --------- .../devicetree/bindings/sound/tas2562.yaml | 77 +++++++++++++++++++ 2 files changed, 77 insertions(+), 37 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/tas2562.txt create mode 100644 Documentation/devicetree/bindings/sound/tas2562.yaml diff --git a/Documentation/devicetree/bindings/sound/tas2562.txt b/Documentation/devicetree/bindings/sound/tas2562.txt deleted file mode 100644 index dc6d7362ded7..000000000000 --- a/Documentation/devicetree/bindings/sound/tas2562.txt +++ /dev/null @@ -1,37 +0,0 @@ -Texas Instruments TAS2562 Smart PA - -The TAS2562 is a mono, digital input Class-D audio amplifier optimized for -efficiently driving high peak power into small loudspeakers. -Integrated speaker voltage and current sense provides for -real time monitoring of loudspeaker behavior. - -Required properties: - - #address-cells - Should be <1>. - - #size-cells - Should be <0>. - - compatible: - Should contain "ti,tas2562", "ti,tas2563". - - reg: - The i2c address. Should be 0x4c, 0x4d, 0x4e or 0x4f. - - ti,imon-slot-no:- TDM TX current sense time slot. - - ti,vmon-slot-no:- TDM TX voltage sense time slot. This slot must always be - greater then ti,imon-slot-no. - -Optional properties: -- interrupt-parent: phandle to the interrupt controller which provides - the interrupt. -- interrupts: (GPIO) interrupt to which the chip is connected. -- shut-down-gpio: GPIO used to control the state of the device. - -Examples: -tas2562@4c { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tas2562"; - reg = <0x4c>; - - interrupt-parent = <&gpio1>; - interrupts = <14>; - - shut-down-gpio = <&gpio1 15 0>; - ti,imon-slot-no = <0>; - ti,vmon-slot-no = <1>; -}; - diff --git a/Documentation/devicetree/bindings/sound/tas2562.yaml b/Documentation/devicetree/bindings/sound/tas2562.yaml new file mode 100644 index 000000000000..1fb467e14d4c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2562.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0+ OR BSD-2-Clause) +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/sound/tas2562.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Texas Instruments TAS2562 Smart PA + +maintainers: + - Dan Murphy <dmurphy@ti.com> + +description: | + The TAS2562 is a mono, digital input Class-D audio amplifier optimized for + efficiently driving high peak power into small loudspeakers. + Integrated speaker voltage and current sense provides for + real time monitoring of loudspeaker behavior. + +properties: + compatible: + enum: + - ti,tas2562 + - ti,tas2563 + + reg: + maxItems: 1 + description: | + I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f + + shut-down-gpio: + description: GPIO used to control the state of the device. + deprecated: true + + shutdown-gpio: + description: GPIO used to control the state of the device. + + interrupts: + maxItems: 1 + + ti,imon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: TDM TX current sense time slot. + + ti,vmon-slot-no: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + TDM TX voltage sense time slot. This slot must always be greater then + ti,imon-slot-no. + + '#sound-dai-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + codec: codec@4c { + compatible = "ti,tas2562"; + reg = <0x4c>; + #sound-dai-cells = <1>; + interrupt-parent = <&gpio1>; + interrupts = <14>; + shutdown-gpio = <&gpio1 15 0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; + }; + +... -- 2.26.2
next prev parent reply other threads:[~2020-06-24 16:16 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-24 16:14 [PATCH v5 0/7] TAS2562 issue fixes and slot programming Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:14 ` [PATCH v5 1/7] dt-bindings: tas2562: Fix shut-down gpio property Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:14 ` [PATCH v5 2/7] ASoC: tas2562: Update shutdown GPIO property Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:14 ` [PATCH v5 3/7] ASoC: tas2562: Fix format issue for extra space before a comma Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:29 ` Mark Brown 2020-06-24 16:29 ` Mark Brown 2020-06-24 16:58 ` Dan Murphy 2020-06-24 16:58 ` Dan Murphy 2020-06-24 17:36 ` Dan Murphy 2020-06-24 17:36 ` Dan Murphy 2020-06-24 17:48 ` Mark Brown 2020-06-24 17:48 ` Mark Brown 2020-06-24 17:51 ` Dan Murphy 2020-06-24 17:51 ` Dan Murphy 2020-06-24 16:14 ` [PATCH v5 4/7] ASoC: tas2562: Add rx and tx slot programming Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:14 ` [PATCH v5 5/7] dt-bindings: tas2562: Add voltage sense slot property Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:14 ` [PATCH v5 6/7] ASoC: tas2562: Add voltage sense slot configuration Dan Murphy 2020-06-24 16:14 ` Dan Murphy 2020-06-24 16:14 ` Dan Murphy [this message] 2020-06-24 16:14 ` [PATCH v5 7/7] dt-bindings: tas2562: Convert the tas2562 binding to yaml Dan Murphy
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200624161459.19248-8-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=robh@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.