All of lore.kernel.org
 help / color / mirror / Atom feed
From: Konrad Dybcio <konradybcio@gmail.com>
To: skrzynka@konradybcio.pl
Cc: Konrad Dybcio <konradybcio@gmail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	Anton Vorontsov <anton@enomsg.org>,
	Colin Cross <ccross@android.com>, Tony Luck <tony.luck@intel.com>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2 12/13] arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
Date: Thu, 25 Jun 2020 20:13:00 +0200	[thread overview]
Message-ID: <20200625181303.129874-13-konradybcio@gmail.com> (raw)
In-Reply-To: <20200625181303.129874-1-konradybcio@gmail.com>

This commit adds support for the Xiaomi Libra (Mi 4C)
smartphone. It's based on the Qualcomm msm8992 SoC.

It currently supports:
* Screen console from bootloader
* SDHCI
* Regulator configuration
* Serial console
* I2C

Signed-off-by: Konrad Dybcio <konradybcio@gmail.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/msm8992-xiaomi-libra.dts    | 364 ++++++++++++++++++
 2 files changed, 365 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..344cdeb68b16 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a5u-eur.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-bullhead-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8992-xiaomi-libra.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8994-angler-rev-101.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8996-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-asus-novago-tp370ql.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
new file mode 100644
index 000000000000..ac9b2f325fc1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8992-xiaomi-libra.dts
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8992.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+	model = "Xiaomi Mi 4C";
+	compatible = "xiaomi,libra", "qcom,msm8992";
+	/* required for bootloader to select correct board */
+	qcom,msm-id = <251 0 252 0>;
+    qcom,pmic-id = <65545 65546 0 0>;
+	qcom,board-id = <12 0>;
+
+	/* This enables graphical output via bootloader-enabled display */
+	chosen {
+		bootargs = "earlycon=tty0 console=tty0";
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer0: framebuffer@3404000 {
+			status= "okay";
+			compatible = "simple-framebuffer";
+			reg = <0 0x3404000 0 (1080 * 1920 * 3)>;
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@0 {
+			label = "Volume Up";
+			gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* This is for getting crash logs using Android downstream kernels */
+		ramoops@dfc00000 {
+			compatible = "ramoops";
+			reg = <0x0 0xdfc00000 0x0 0x40000>;
+			console-size = <0x10000>;
+			record-size = <0x10000>;
+			ftrace-size = <0x10000>;
+			pmsg-size = <0x20000>;
+		};
+
+		continuous_splash: framebuffer@3401000{
+			reg = <0x0 0x3401000 0x0 0x2200000>;
+			no-map;
+		};
+
+		dfps_data_mem: dfps_data_mem@3400000 {
+			reg = <0x0 0x3400000 0x0 0x1000>;
+			no-map;
+		};
+
+		peripheral_region: peripheral_region@7400000 {
+			reg = <0x0 0x7400000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		modem_region: modem_region@9000000 {
+			reg = <0x0 0x9000000 0x0 0x5a00000>;
+			no-map;
+		};
+
+		tzapp: modem_region@ea00000 {
+			reg = <0x0 0xea00000 0x0 0x1900000>;
+			no-map;
+		};
+	};
+};
+
+&blsp_i2c2 {
+	status = "okay";
+
+	/* Atmel or Synaptics touchscreen */
+};
+
+&blsp_i2c5 {
+	status = "okay";
+
+	/* Silabs si4705 FM transmitter */
+};
+
+&blsp_i2c6 {
+	status = "okay";
+
+	/* NCI NFC,
+	 * TI USB320 Type-C controller,
+	 * Pericom 30216a USB (de)mux switch
+	 */
+};
+
+&blsp_i2c7 {
+	status = "okay";
+
+	/* cm36686 proximity and ambient light sensor */
+};
+
+&blsp_i2c13 {
+	status = "okay";
+
+	/* ST lsm6db0 gyro/accelerometer */
+};
+
+&blsp2_uart2 {
+	status = "okay";
+};
+
+&rpm_requests {
+	pm8994-regulators {
+		compatible = "qcom,rpm-pm8994-regulators";
+
+		vdd_l1-supply = <&pm8994_s7>;
+		vdd_l2_26_28-supply = <&pm8994_s3>;
+		vdd_l3_11-supply = <&pm8994_s3>;
+		vdd_l4_27_31-supply = <&pm8994_s3>;
+		vdd_l5_7-supply = <&pm8994_s3>;
+		vdd_l6_12_32-supply = <&pm8994_s5>;
+		vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+		vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+		vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+		vdd_l14_15-supply = <&pm8994_s5>;
+		vdd_l17_29-supply = <&vreg_vph_pwr>;
+		vdd_l20_21-supply = <&vreg_vph_pwr>;
+		vdd_l25-supply = <&pm8994_s5>;
+		vdd_lvs1_2 = <&pm8994_s4>;
+
+		pm8994_s1: s1 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s2: s2 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_s3: s3 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+		};
+
+		pm8994_s4: s4 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+			regulator-always-on;
+			regulator-system-load = <325000>;
+		};
+
+		pm8994_s5: s5 {
+			regulator-min-microvolt = <2150000>;
+			regulator-max-microvolt = <2150000>;
+		};
+
+		pm8994_s7: s7 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l2: l2 {
+			regulator-min-microvolt = <1250000>;
+			regulator-max-microvolt = <1250000>;
+		};
+
+		pm8994_l3: l3 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l4: l4 {
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8994_l5: l5 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l7: l7 {
+			/* unused */
+			status = "disabled";
+		};
+
+		pm8994_l8: l8 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l9: l9 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l10: l10 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l11: l11 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+		};
+
+		pm8994_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l13: l13 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+		};
+
+		pm8994_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l16: l16 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l17: l17 {
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <2700000>;
+		};
+
+		pm8994_l18: l18 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			regulator-always-on;
+		};
+
+		pm8994_l19: l19 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l20: l20 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+			regulator-boot-on;
+			regulator-allow-set-load;
+			regulator-system-load = <570000>;
+		};
+
+		pm8994_l21: l21 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-always-on;
+		};
+
+		pm8994_l22: l22 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+		};
+
+		pm8994_l23: l23 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l24: l24 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3150000>;
+		};
+
+		pm8994_l25: l25 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l26: l26 {
+			regulator-min-microvolt = <987500>;
+			regulator-max-microvolt = <987500>;
+
+		};
+
+		pm8994_l27: l27 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+		};
+
+		pm8994_l28: l28 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8994_l29: l29 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8994_l30: l30 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8994_l31: l31 {
+			regulator-min-microvolt = <1262500>;
+			regulator-max-microvolt = <1262500>;
+		};
+
+		pm8994_l32: l32 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+
+	mmc-hs400-1_8v;
+	vmmc-supply = <&pm8994_l20>;
+	vqmmc-supply = <&pm8994_s4>;
+};
-- 
2.27.0


  parent reply	other threads:[~2020-06-25 18:13 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-25 18:12 [PATCH v2 00/13] msm8992 DTS updates, peripheral enablement Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 01/13] arm64: dts: qcom: msm8992: Modernize the DTS style Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 02/13] arm64: dts: qcom: msm8992: Fix SDHCI1 Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 03/13] arm64: dts: qcom: bullhead: Add qcom,msm-id Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 04/13] arm64: dts: qcom: bullhead: Move UART pinctrl to SoC Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 05/13] arm64: dts: Add a proper CPU map for MSM8992 Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 06/13] arm64: dts: msm8992: Add a SCM node Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 07/13] arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 08/13] arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 09/13] arm64: dts: msm8992: Add PMU node Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 10/13] arm64: dts: msm8992: Add PSCI support Konrad Dybcio
2020-06-25 18:12 ` [PATCH v2 11/13] arm64: dts: qcom: msm8992: Add RPMCC node Konrad Dybcio
2020-06-25 18:13 ` Konrad Dybcio [this message]
2020-06-25 18:13 ` [PATCH v2 13/13] arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree Konrad Dybcio

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200625181303.129874-13-konradybcio@gmail.com \
    --to=konradybcio@gmail.com \
    --cc=agross@kernel.org \
    --cc=anton@enomsg.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=ccross@android.com \
    --cc=devicetree@vger.kernel.org \
    --cc=keescook@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=skrzynka@konradybcio.pl \
    --cc=tony.luck@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.