All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
To: peter.maydell@linaro.org, laurent@vivier.eu,
	david@gibson.dropbear.id.au, qemu-devel@nongnu.org,
	qemu-ppc@nongnu.org
Subject: [PULL 19/22] mac_via: rework ADB state machine to be compatible with both MacOS and Linux
Date: Fri, 26 Jun 2020 10:23:14 +0100	[thread overview]
Message-ID: <20200626092317.3875-20-mark.cave-ayland@ilande.co.uk> (raw)
In-Reply-To: <20200626092317.3875-1-mark.cave-ayland@ilande.co.uk>

The existing ADB state machine is designed to work with Linux which has a different
interpretation of the state machine detailed in "Guide to the Macintosh Family
Hardware". In particular the current Linux implementation includes an extra change
to IDLE state when switching the VIA between send and receive modes which does not
occur in MacOS, and omitting this transition causes the current mac_via ADB state
machine to fail.

Rework the ADB state machine accordingly so that it can enumerate and autopoll the
ADB under both Linux and MacOS, including the addition of the new adb_autopoll_block()
and adb_autopoll_unblock() functions.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20200623204936.24064-20-mark.cave-ayland@ilande.co.uk>
---
 hw/misc/mac_via.c         | 375 ++++++++++++++++++++++++++------------
 hw/misc/trace-events      |   3 +
 include/hw/misc/mac_via.h |   1 +
 3 files changed, 260 insertions(+), 119 deletions(-)

diff --git a/hw/misc/mac_via.c b/hw/misc/mac_via.c
index a1dc00d9f6..71b6f92645 100644
--- a/hw/misc/mac_via.c
+++ b/hw/misc/mac_via.c
@@ -599,176 +599,312 @@ static void via1_rtc_update(MacVIAState *m)
     m->cmd = REG_EMPTY;
 }
 
-static int adb_via_poll(MacVIAState *s, int state, uint8_t *data)
+static void adb_via_poll(void *opaque)
 {
-    ADBBusState *adb_bus = &s->adb_bus;
+    MacVIAState *m = opaque;
+    MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
+    MOS6522State *s = MOS6522(v1s);
+    ADBBusState *adb_bus = &m->adb_bus;
+    uint8_t obuf[9];
+    uint8_t *data = &s->sr;
+    int olen;
+    uint16_t pending;
 
-    if (state != ADB_STATE_IDLE) {
-        return 0;
+    /*
+     * Setting vADBInt below indicates that an autopoll reply has been
+     * received, however we must block autopoll until the point where
+     * the entire reply has been read back to the host
+     */
+    if (adb_bus->autopoll_blocked) {
+        return;
+    } else {
+        adb_autopoll_block(adb_bus);
     }
 
-    if (s->adb_data_in_size < s->adb_data_in_index) {
-        return 0;
-    }
+    m->adb_data_in_index = 0;
+    m->adb_data_out_index = 0;
+    olen = adb_poll(adb_bus, obuf, adb_bus->autopoll_mask);
+
+    if (olen > 0) {
+        /* Autopoll response */
+        *data = obuf[0];
+        olen--;
+        memcpy(m->adb_data_in, &obuf[1], olen);
+        m->adb_data_in_size = olen;
+
+        s->b &= ~VIA1B_vADBInt;
+        qemu_irq_raise(m->adb_data_ready);
+    } else if (olen < 0) {
+        /* Bus timeout (device does not exist) */
+        *data = 0xff;
+        s->b |= VIA1B_vADBInt;
+        adb_autopoll_unblock(adb_bus);
+    } else {
+        pending = adb_bus->pending & ~(1 << (m->adb_autopoll_cmd >> 4));
+
+        if (pending) {
+            /*
+             * Bus timeout (device exists but another device has data). Block
+             * autopoll so the OS can read out the first EVEN and first ODD
+             * byte to determine bus timeout and SRQ status
+             */
+            *data = m->adb_autopoll_cmd;
+            s->b &= ~VIA1B_vADBInt;
 
-    if (s->adb_data_out_index != 0) {
-        return 0;
-    }
+            obuf[0] = 0xff;
+            obuf[1] = 0xff;
+            olen = 2;
 
-    s->adb_data_in_index = 0;
-    s->adb_data_out_index = 0;
-    s->adb_data_in_size = adb_poll(adb_bus, s->adb_data_in,
-                                   adb_bus->autopoll_mask);
+            memcpy(m->adb_data_in, obuf, olen);
+            m->adb_data_in_size = olen;
 
-    if (s->adb_data_in_size) {
-        *data = s->adb_data_in[s->adb_data_in_index++];
-        qemu_irq_raise(s->adb_data_ready);
+            qemu_irq_raise(m->adb_data_ready);
+        } else {
+            /* Bus timeout (device exists but no other device has data) */
+            *data = 0;
+            s->b |= VIA1B_vADBInt;
+            adb_autopoll_unblock(adb_bus);
+        }
     }
 
-    return s->adb_data_in_size;
+    trace_via1_adb_poll(*data, (s->b & VIA1B_vADBInt) ? "+" : "-",
+                        adb_bus->status, m->adb_data_in_index, olen);
 }
 
-static int adb_via_send(MacVIAState *s, int state, uint8_t data)
+static int adb_via_send_len(uint8_t data)
 {
-    switch (state) {
-    case ADB_STATE_NEW:
-        s->adb_data_out_index = 0;
-        break;
-    case ADB_STATE_EVEN:
-        if ((s->adb_data_out_index & 1) == 0) {
-            return 0;
-        }
-        break;
-    case ADB_STATE_ODD:
-        if (s->adb_data_out_index & 1) {
-            return 0;
+    /* Determine the send length from the given ADB command */
+    uint8_t cmd = data & 0xc;
+    uint8_t reg = data & 0x3;
+
+    switch (cmd) {
+    case 0x8:
+        /* Listen command */
+        switch (reg) {
+        case 2:
+            /* Register 2 is only used for the keyboard */
+            return 3;
+        case 3:
+            /*
+             * Fortunately our devices only implement writes
+             * to register 3 which is fixed at 2 bytes
+             */
+            return 3;
+        default:
+            qemu_log_mask(LOG_UNIMP, "ADB unknown length for register %d\n",
+                          reg);
+            return 1;
         }
-        break;
-    case ADB_STATE_IDLE:
-        return 0;
+    default:
+        /* Talk, BusReset */
+        return 1;
     }
-
-    assert(s->adb_data_out_index < sizeof(s->adb_data_out) - 1);
-
-    s->adb_data_out[s->adb_data_out_index++] = data;
-    qemu_irq_raise(s->adb_data_ready);
-    return 1;
 }
 
-static int adb_via_receive(MacVIAState *s, int state, uint8_t *data)
+static void adb_via_send(MacVIAState *s, int state, uint8_t data)
 {
+    MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&s->mos6522_via1);
+    MOS6522State *ms = MOS6522(v1s);
+    ADBBusState *adb_bus = &s->adb_bus;
+    uint16_t autopoll_mask;
+
     switch (state) {
     case ADB_STATE_NEW:
-        return 0;
-
-    case ADB_STATE_EVEN:
-        if (s->adb_data_in_size <= 0) {
-            qemu_irq_raise(s->adb_data_ready);
-            return 0;
-        }
-
-        if (s->adb_data_in_index >= s->adb_data_in_size) {
-            *data = 0;
-            qemu_irq_raise(s->adb_data_ready);
-            return 1;
-        }
-
-        if ((s->adb_data_in_index & 1) == 0) {
-            return 0;
+        /*
+         * Command byte: vADBInt tells host autopoll data already present
+         * in VIA shift register and ADB transceiver
+         */
+        adb_autopoll_block(adb_bus);
+
+        if (adb_bus->status & ADB_STATUS_POLLREPLY) {
+            /* Tell the host the existing data is from autopoll */
+            ms->b &= ~VIA1B_vADBInt;
+        } else {
+            ms->b |= VIA1B_vADBInt;
+            s->adb_data_out_index = 0;
+            s->adb_data_out[s->adb_data_out_index++] = data;
         }
 
+        trace_via1_adb_send(" NEW", data, (ms->b & VIA1B_vADBInt) ? "+" : "-");
+        qemu_irq_raise(s->adb_data_ready);
         break;
 
+    case ADB_STATE_EVEN:
     case ADB_STATE_ODD:
-        if (s->adb_data_in_size <= 0) {
-            qemu_irq_raise(s->adb_data_ready);
-            return 0;
-        }
-
-        if (s->adb_data_in_index >= s->adb_data_in_size) {
-            *data = 0;
-            qemu_irq_raise(s->adb_data_ready);
-            return 1;
-        }
-
-        if (s->adb_data_in_index & 1) {
-            return 0;
-        }
+        ms->b |= VIA1B_vADBInt;
+        s->adb_data_out[s->adb_data_out_index++] = data;
 
+        trace_via1_adb_send(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
+                            data, (ms->b & VIA1B_vADBInt) ? "+" : "-");
+        qemu_irq_raise(s->adb_data_ready);
         break;
 
     case ADB_STATE_IDLE:
-        if (s->adb_data_out_index == 0) {
-            return 0;
-        }
+        return;
+    }
 
-        s->adb_data_in_size = adb_request(&s->adb_bus, s->adb_data_in,
+    /* If the command is complete, execute it */
+    if (s->adb_data_out_index == adb_via_send_len(s->adb_data_out[0])) {
+        s->adb_data_in_size = adb_request(adb_bus, s->adb_data_in,
                                           s->adb_data_out,
                                           s->adb_data_out_index);
-        s->adb_data_out_index = 0;
         s->adb_data_in_index = 0;
-        if (s->adb_data_in_size < 0) {
-            *data = 0xff;
-            qemu_irq_raise(s->adb_data_ready);
-            return -1;
-        }
 
-        if (s->adb_data_in_size == 0) {
-            return 0;
+        if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
+            /*
+             * Bus timeout (but allow first EVEN and ODD byte to indicate
+             * timeout via vADBInt and SRQ status)
+             */
+            s->adb_data_in[0] = 0xff;
+            s->adb_data_in[1] = 0xff;
+            s->adb_data_in_size = 2;
         }
 
-        break;
-    }
-
-    assert(s->adb_data_in_index < sizeof(s->adb_data_in) - 1);
+        /*
+         * If last command is TALK, store it for use by autopoll and adjust
+         * the autopoll mask accordingly
+         */
+        if ((s->adb_data_out[0] & 0xc) == 0xc) {
+            s->adb_autopoll_cmd = s->adb_data_out[0];
 
-    *data = s->adb_data_in[s->adb_data_in_index++];
-    qemu_irq_raise(s->adb_data_ready);
-    if (*data == 0xff || *data == 0) {
-        return 0;
+            autopoll_mask = 1 << (s->adb_autopoll_cmd >> 4);
+            adb_set_autopoll_mask(adb_bus, autopoll_mask);
+        }
     }
-    return 1;
 }
 
-static void via1_adb_update(MacVIAState *m)
+static void adb_via_receive(MacVIAState *s, int state, uint8_t *data)
 {
-    MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
-    MOS6522State *s = MOS6522(v1s);
-    int state;
-    int ret;
+    MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&s->mos6522_via1);
+    MOS6522State *ms = MOS6522(v1s);
+    ADBBusState *adb_bus = &s->adb_bus;
+    uint16_t pending;
 
-    state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
+    switch (state) {
+    case ADB_STATE_NEW:
+        ms->b |= VIA1B_vADBInt;
+        return;
 
-    if (s->acr & VIA1ACR_vShiftOut) {
-        /* output mode */
-        ret = adb_via_send(m, state, s->sr);
-        if (ret > 0) {
-            s->b &= ~VIA1B_vADBInt;
+    case ADB_STATE_IDLE:
+        /*
+         * Since adb_request() will have already consumed the data from the
+         * device, we must detect this extra state change and re-inject the
+         * reponse as either a "fake" autopoll reply or bus timeout
+         * accordingly
+         */
+        if (s->adb_data_in_index == 0) {
+            if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
+                *data = 0xff;
+                ms->b |= VIA1B_vADBInt;
+                qemu_irq_raise(s->adb_data_ready);
+            } else if (s->adb_data_in_size > 0) {
+                adb_bus->status = ADB_STATUS_POLLREPLY;
+                *data = s->adb_autopoll_cmd;
+                ms->b &= ~VIA1B_vADBInt;
+                qemu_irq_raise(s->adb_data_ready);
+            }
         } else {
-            s->b |= VIA1B_vADBInt;
+            ms->b |= VIA1B_vADBInt;
+            adb_autopoll_unblock(adb_bus);
         }
-    } else {
-        /* input mode */
-        ret = adb_via_receive(m, state, &s->sr);
-        if (ret > 0 && s->sr != 0xff) {
-            s->b &= ~VIA1B_vADBInt;
-        } else {
-            s->b |= VIA1B_vADBInt;
+
+        trace_via1_adb_receive("IDLE", *data,
+                        (ms->b & VIA1B_vADBInt) ? "+" : "-", adb_bus->status,
+                        s->adb_data_in_index, s->adb_data_in_size);
+
+        break;
+
+    case ADB_STATE_EVEN:
+    case ADB_STATE_ODD:
+        switch (s->adb_data_in_index) {
+        case 0:
+            /* First EVEN byte: vADBInt indicates bus timeout */
+            trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
+                                   *data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
+                                   adb_bus->status, s->adb_data_in_index,
+                                   s->adb_data_in_size);
+
+            *data = s->adb_data_in[s->adb_data_in_index++];
+            if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
+                ms->b &= ~VIA1B_vADBInt;
+            } else {
+                ms->b |= VIA1B_vADBInt;
+            }
+            break;
+
+        case 1:
+            /* First ODD byte: vADBInt indicates SRQ */
+            trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
+                                   *data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
+                                   adb_bus->status, s->adb_data_in_index,
+                                   s->adb_data_in_size);
+
+            *data = s->adb_data_in[s->adb_data_in_index++];
+            pending = adb_bus->pending & ~(1 << (s->adb_autopoll_cmd >> 4));
+            if (pending) {
+                ms->b &= ~VIA1B_vADBInt;
+            } else {
+                ms->b |= VIA1B_vADBInt;
+            }
+            break;
+
+        default:
+            /*
+             * Otherwise vADBInt indicates end of data. Note that Linux
+             * specifically checks for the sequence 0x0 0xff to confirm the
+             * end of the poll reply, so provide these extra bytes below to
+             * keep it happy
+             */
+            trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
+                                   *data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
+                                   adb_bus->status, s->adb_data_in_index,
+                                   s->adb_data_in_size);
+
+            if (s->adb_data_in_index < s->adb_data_in_size) {
+                /* Next data byte */
+                *data = s->adb_data_in[s->adb_data_in_index++];
+                ms->b |= VIA1B_vADBInt;
+            } else if (s->adb_data_in_index == s->adb_data_in_size) {
+                if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
+                    /* Bus timeout (no more data) */
+                    *data = 0xff;
+                } else {
+                    /* Return 0x0 after reply */
+                    *data = 0;
+                }
+                s->adb_data_in_index++;
+                ms->b &= ~VIA1B_vADBInt;
+            } else {
+                /* Bus timeout (no more data) */
+                *data = 0xff;
+                ms->b &= ~VIA1B_vADBInt;
+                adb_bus->status = 0;
+                adb_autopoll_unblock(adb_bus);
+            }
+            break;
         }
+
+        qemu_irq_raise(s->adb_data_ready);
+        break;
     }
 }
 
-static void via_adb_poll(void *opaque)
+static void via1_adb_update(MacVIAState *m)
 {
-    MacVIAState *m = opaque;
     MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
     MOS6522State *s = MOS6522(v1s);
-    int state;
+    int oldstate, state;
 
-    if (s->b & VIA1B_vADBInt) {
-        state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
-        if (adb_via_poll(m, state, &s->sr)) {
-            s->b &= ~VIA1B_vADBInt;
+    oldstate = (v1s->last_b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
+    state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
+
+    if (state != oldstate) {
+        if (s->acr & VIA1ACR_vShiftOut) {
+            /* output mode */
+            adb_via_send(m, state, s->sr);
+        } else {
+            /* input mode */
+            adb_via_receive(m, state, &s->sr);
         }
     }
 }
@@ -916,7 +1052,7 @@ static void mac_via_realize(DeviceState *dev, Error **errp)
     qemu_get_timedate(&tm, 0);
     m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
 
-    adb_register_autopoll_callback(adb_bus, via_adb_poll, m);
+    adb_register_autopoll_callback(adb_bus, adb_via_poll, m);
     m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq",
                                                VIA1_IRQ_ADB_READY_BIT);
 
@@ -1019,6 +1155,7 @@ static const VMStateDescription vmstate_mac_via = {
         VMSTATE_INT32(adb_data_out_index, MacVIAState),
         VMSTATE_BUFFER(adb_data_in, MacVIAState),
         VMSTATE_BUFFER(adb_data_out, MacVIAState),
+        VMSTATE_UINT8(adb_autopoll_cmd, MacVIAState),
         VMSTATE_END_OF_LIST()
     }
 };
diff --git a/hw/misc/trace-events b/hw/misc/trace-events
index 5561746866..68a6d9f2ab 100644
--- a/hw/misc/trace-events
+++ b/hw/misc/trace-events
@@ -202,6 +202,9 @@ via1_rtc_cmd_pram_read(int addr, int value) "addr=%u value=0x%02x"
 via1_rtc_cmd_pram_write(int addr, int value) "addr=%u value=0x%02x"
 via1_rtc_cmd_pram_sect_read(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
 via1_rtc_cmd_pram_sect_write(int sector, int offset, int addr, int value) "sector=%u offset=%u addr=%d value=0x%02x"
+via1_adb_send(const char *state, uint8_t data, const char *vadbint) "state %s data=0x%02x vADBInt=%s"
+via1_adb_receive(const char *state, uint8_t data, const char *vadbint, int status, int index, int size) "state %s data=0x%02x vADBInt=%s status=0x%x index=%d size=%d"
+via1_adb_poll(uint8_t data, const char *vadbint, int status, int index, int size) "data=0x%02x vADBInt=%s status=0x%x index=%d size=%d"
 
 # grlib_ahb_apb_pnp.c
 grlib_ahb_pnp_read(uint64_t addr, uint32_t value) "AHB PnP read addr:0x%03"PRIx64" data:0x%08x"
diff --git a/include/hw/misc/mac_via.h b/include/hw/misc/mac_via.h
index 2aaf9e27bf..0be05d649b 100644
--- a/include/hw/misc/mac_via.h
+++ b/include/hw/misc/mac_via.h
@@ -112,6 +112,7 @@ typedef struct MacVIAState {
     int adb_data_out_index;
     uint8_t adb_data_in[128];
     uint8_t adb_data_out[16];
+    uint8_t adb_autopoll_cmd;
 } MacVIAState;
 
 #endif
-- 
2.20.1



  parent reply	other threads:[~2020-06-26  9:36 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-26  9:22 [PULL 00/22] qemu-macppc queue 20200626 Mark Cave-Ayland
2020-06-26  9:22 ` [PULL 01/22] adb: coding style update to fix checkpatch errors Mark Cave-Ayland
2020-06-26  9:22 ` [PULL 02/22] adb: fix adb-mouse read length and revert disable-reg3-direct-writes workaround Mark Cave-Ayland
2020-06-26  9:22 ` [PULL 03/22] cuda: convert ADB autopoll timer from ns to ms Mark Cave-Ayland
2020-06-26  9:22 ` [PULL 04/22] pmu: fix duplicate autopoll mask variable Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 05/22] pmu: honour autopoll_rate_ms when rearming the ADB autopoll timer Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 06/22] adb: introduce realize/unrealize and VMStateDescription for ADB bus Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 07/22] adb: create autopoll variables directly within ADBBusState Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 08/22] cuda: convert to use ADBBusState internal autopoll variables Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 09/22] pmu: " Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 10/22] mac_via: " Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 11/22] adb: introduce new ADBDeviceHasData method to ADBDeviceClass Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 12/22] adb: keep track of devices with pending data Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 13/22] adb: add status field for holding information about the last ADB request Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 14/22] adb: use adb_request() only for explicit requests Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 15/22] adb: add autopoll_blocked variable to block autopoll Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 16/22] cuda: add adb_autopoll_block() and adb_autopoll_unblock() functions Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 17/22] pmu: " Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 18/22] mac_via: move VIA1 portB write logic into mos6522_q800_via1_write() Mark Cave-Ayland
2020-06-26  9:23 ` Mark Cave-Ayland [this message]
2020-06-26  9:23 ` [PULL 20/22] adb: only call autopoll callbacks when autopoll is not blocked Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 21/22] adb: use adb_device prefix for ADB device trace events Mark Cave-Ayland
2020-06-26  9:23 ` [PULL 22/22] adb: add ADB bus " Mark Cave-Ayland
2020-06-26 12:48 ` [PULL 00/22] qemu-macppc queue 20200626 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200626092317.3875-20-mark.cave-ayland@ilande.co.uk \
    --to=mark.cave-ayland@ilande.co.uk \
    --cc=david@gibson.dropbear.id.au \
    --cc=laurent@vivier.eu \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.