All of lore.kernel.org
 help / color / mirror / Atom feed
From: Damien Le Moal <damien.lemoal@wdc.com>
To: linux-scsi@vger.kernel.org,
	"Martin K . Petersen" <martin.petersen@oracle.com>
Subject: [PATCH] scsi: mpt3sas: Fix unlock imbalance
Date: Wed,  1 Jul 2020 17:52:54 +0900	[thread overview]
Message-ID: <20200701085254.51740-1-damien.lemoal@wdc.com> (raw)

In BRM_status_show(), if the condition "!ioc->is_warpdrive" tested on
entry to the function is true, a "goto out" is called. This results in
unlocking ioc->pci_access_mutex without this mutex lock being taken.
This generates the following splat:

[ 1148.539883] mpt3sas_cm2: BRM_status_show: BRM attribute is only for warpdrive
[ 1148.547184]
[ 1148.548708] =====================================
[ 1148.553501] WARNING: bad unlock balance detected!
[ 1148.558277] 5.8.0-rc3+ #827 Not tainted
[ 1148.562183] -------------------------------------
[ 1148.566959] cat/5008 is trying to release lock (&ioc->pci_access_mutex) at:
[ 1148.574035] [<ffffffffc070b7a3>] BRM_status_show+0xd3/0x100 [mpt3sas]
[ 1148.580574] but there are no more locks to release!
[ 1148.585524]
[ 1148.585524] other info that might help us debug this:
[ 1148.599624] 3 locks held by cat/5008:
[ 1148.607085]  #0: ffff92aea3e392c0 (&p->lock){+.+.}-{3:3}, at: seq_read+0x34/0x480
[ 1148.618509]  #1: ffff922ef14c4888 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x2a/0xb0
[ 1148.630729]  #2: ffff92aedb5d7310 (kn->active#224){.+.+}-{0:0}, at: kernfs_seq_start+0x32/0xb0
[ 1148.643347]
[ 1148.643347] stack backtrace:
[ 1148.655259] CPU: 73 PID: 5008 Comm: cat Not tainted 5.8.0-rc3+ #827
[ 1148.665309] Hardware name: HGST H4060-S/S2600STB, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019
[ 1148.678394] Call Trace:
[ 1148.684750]  dump_stack+0x78/0xa0
[ 1148.691802]  lock_release.cold+0x45/0x4a
[ 1148.699451]  __mutex_unlock_slowpath+0x35/0x270
[ 1148.707675]  BRM_status_show+0xd3/0x100 [mpt3sas]
[ 1148.716092]  dev_attr_show+0x19/0x40
[ 1148.723664]  sysfs_kf_seq_show+0x87/0x100
[ 1148.731193]  seq_read+0xbc/0x480
[ 1148.737882]  vfs_read+0xa0/0x160
[ 1148.744514]  ksys_read+0x58/0xd0
[ 1148.751129]  do_syscall_64+0x4c/0xa0
[ 1148.757941]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 1148.766240] RIP: 0033:0x7f1230566542
[ 1148.772957] Code: Bad RIP value.
[ 1148.779206] RSP: 002b:00007ffeac1bcac8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 1148.790063] RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007f1230566542
[ 1148.800284] RDX: 0000000000020000 RSI: 00007f1223460000 RDI: 0000000000000003
[ 1148.810474] RBP: 00007f1223460000 R08: 00007f122345f010 R09: 0000000000000000
[ 1148.820641] R10: 0000000000000022 R11: 0000000000000246 R12: 0000000000000000
[ 1148.830728] R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000

Fix this by returning immediately instead of jumping to the out label.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
---
 drivers/scsi/mpt3sas/mpt3sas_ctl.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_ctl.c b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
index 62e552838565..e94e72de2fc6 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_ctl.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_ctl.c
@@ -3145,7 +3145,7 @@ BRM_status_show(struct device *cdev, struct device_attribute *attr,
 	if (!ioc->is_warpdrive) {
 		ioc_err(ioc, "%s: BRM attribute is only for warpdrive\n",
 			__func__);
-		goto out;
+		return 0;
 	}
 	/* pci_access_mutex lock acquired by sysfs show path */
 	mutex_lock(&ioc->pci_access_mutex);
-- 
2.26.2


             reply	other threads:[~2020-07-01  8:52 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  8:52 Damien Le Moal [this message]
2020-07-01 10:10 ` [PATCH] scsi: mpt3sas: Fix unlock imbalance Johannes Thumshirn
2020-07-01 10:31   ` Damien Le Moal
2020-07-01 12:46     ` Johannes Thumshirn
2020-07-02  7:45   ` Sreekanth Reddy
2020-07-03  4:02 ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200701085254.51740-1-damien.lemoal@wdc.com \
    --to=damien.lemoal@wdc.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.