From: Marc Kleine-Budde <mkl@pengutronix.de> To: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org, kernel@pengutronix.de, Marc Kleine-Budde <mkl@pengutronix.de> Subject: [PATCH 4/9] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length Date: Mon, 6 Jul 2020 09:17:56 +0200 [thread overview] Message-ID: <20200706071801.558394-5-mkl@pengutronix.de> (raw) In-Reply-To: <20200706071801.558394-1-mkl@pengutronix.de> In sun6i_spi_transfer_one() the driver ensures that the length of the transfer is smaller or equal to SUN6I_MAX_XFER_SIZE. This means the masking of the length to SUN6I_MAX_XFER_SIZE can be skipped when writing the transfer length into the registers. This patch removes the useless masking of the transfer length to SUN6I_MAX_XFER_SIZE. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/spi/spi-sun6i.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 955be8921c45..882492774986 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -73,13 +73,10 @@ #define SUN6I_MAX_XFER_SIZE 0xffffff #define SUN6I_BURST_CNT_REG 0x30 -#define SUN6I_BURST_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_XMIT_CNT_REG 0x34 -#define SUN6I_XMIT_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_BURST_CTL_CNT_REG 0x38 -#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_TXDATA_REG 0x200 #define SUN6I_RXDATA_REG 0x300 @@ -305,10 +302,9 @@ static int sun6i_spi_transfer_one(struct spi_master *master, tx_len = tfr->len; /* Setup the counters */ - sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len)); - sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len)); - sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, - SUN6I_BURST_CTL_CNT_STC(tx_len)); + sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, tfr->len); + sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, tx_len); + sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, tx_len); /* Fill the TX FIFO */ sun6i_spi_fill_fifo(sspi, sspi->fifo_depth); -- 2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Marc Kleine-Budde <mkl@pengutronix.de> To: Mark Brown <broonie@kernel.org> Cc: Maxime Ripard <mripard@kernel.org>, linux-spi@vger.kernel.org, Chen-Yu Tsai <wens@csie.org>, Marc Kleine-Budde <mkl@pengutronix.de>, kernel@pengutronix.de, linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/9] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length Date: Mon, 6 Jul 2020 09:17:56 +0200 [thread overview] Message-ID: <20200706071801.558394-5-mkl@pengutronix.de> (raw) In-Reply-To: <20200706071801.558394-1-mkl@pengutronix.de> In sun6i_spi_transfer_one() the driver ensures that the length of the transfer is smaller or equal to SUN6I_MAX_XFER_SIZE. This means the masking of the length to SUN6I_MAX_XFER_SIZE can be skipped when writing the transfer length into the registers. This patch removes the useless masking of the transfer length to SUN6I_MAX_XFER_SIZE. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> --- drivers/spi/spi-sun6i.c | 10 +++------- 1 file changed, 3 insertions(+), 7 deletions(-) diff --git a/drivers/spi/spi-sun6i.c b/drivers/spi/spi-sun6i.c index 955be8921c45..882492774986 100644 --- a/drivers/spi/spi-sun6i.c +++ b/drivers/spi/spi-sun6i.c @@ -73,13 +73,10 @@ #define SUN6I_MAX_XFER_SIZE 0xffffff #define SUN6I_BURST_CNT_REG 0x30 -#define SUN6I_BURST_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_XMIT_CNT_REG 0x34 -#define SUN6I_XMIT_CNT(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_BURST_CTL_CNT_REG 0x38 -#define SUN6I_BURST_CTL_CNT_STC(cnt) ((cnt) & SUN6I_MAX_XFER_SIZE) #define SUN6I_TXDATA_REG 0x200 #define SUN6I_RXDATA_REG 0x300 @@ -305,10 +302,9 @@ static int sun6i_spi_transfer_one(struct spi_master *master, tx_len = tfr->len; /* Setup the counters */ - sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, SUN6I_BURST_CNT(tfr->len)); - sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, SUN6I_XMIT_CNT(tx_len)); - sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, - SUN6I_BURST_CTL_CNT_STC(tx_len)); + sun6i_spi_write(sspi, SUN6I_BURST_CNT_REG, tfr->len); + sun6i_spi_write(sspi, SUN6I_XMIT_CNT_REG, tx_len); + sun6i_spi_write(sspi, SUN6I_BURST_CTL_CNT_REG, tx_len); /* Fill the TX FIFO */ sun6i_spi_fill_fifo(sspi, sspi->fifo_depth); -- 2.27.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-06 7:18 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-06 7:17 [PATCH 0/9] spi: spi-sun6i: One fix and some improvements Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 7:17 ` [PATCH 1/9] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 7:17 ` [PATCH 2/9] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 7:17 ` [PATCH 3/9] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde [this message] 2020-07-06 7:17 ` [PATCH 4/9] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length Marc Kleine-Budde 2020-07-06 7:17 ` [PATCH 5/9] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 12:36 ` Maxime Ripard 2020-07-06 12:36 ` Maxime Ripard 2020-07-06 12:37 ` Marc Kleine-Budde 2020-07-06 12:37 ` Marc Kleine-Budde 2020-07-06 7:17 ` [PATCH 6/9] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 7:17 ` [PATCH 7/9] spi: spi-sun6i: sun6i_spi_fill_fifo(): " Marc Kleine-Budde 2020-07-06 7:17 ` Marc Kleine-Budde 2020-07-06 7:18 ` [PATCH 8/9] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register Marc Kleine-Budde 2020-07-06 7:18 ` Marc Kleine-Budde 2020-07-06 7:18 ` [PATCH 9/9] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed Marc Kleine-Budde 2020-07-06 7:18 ` Marc Kleine-Budde 2020-07-06 12:43 ` [PATCH 0/9] spi: spi-sun6i: One fix and some improvements Maxime Ripard 2020-07-06 12:43 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200706071801.558394-5-mkl@pengutronix.de \ --to=mkl@pengutronix.de \ --cc=broonie@kernel.org \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-spi@vger.kernel.org \ --cc=mripard@kernel.org \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.