All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	linux-spi@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	kernel@pengutronix.de
Subject: [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements
Date: Mon,  6 Jul 2020 16:34:33 +0200	[thread overview]
Message-ID: <20200706143443.9855-1-mkl@pengutronix.de> (raw)

Hello,

this series first fixes the calculation of the clock rate. The driver will
round up to the nearest clock rate instead of rounding down. Resulting in SPI
devices accessed with a too high SPI clock.

The remaining patches improve the performance of the driver. The changes range
from micro-optimizations like reducing MMIO writes to the controller to
reducing the number of needed interrupts in some use cases.

regards,
Marc

changes since v1:
- added Maxime Ripard's to the existing patches
- 06/10: (was 05/10 in v1)
  "spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it"
  use FIELD_GET instead of open coding it
  (tnx: Maxime Ripard)
- 05/10: "spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET()"
  new patch




WARNING: multiple messages have this Message-ID (diff)
From: Marc Kleine-Budde <mkl@pengutronix.de>
To: Mark Brown <broonie@kernel.org>
Cc: kernel@pengutronix.de, Chen-Yu Tsai <wens@csie.org>,
	linux-arm-kernel@lists.infradead.org,
	Maxime Ripard <mripard@kernel.org>,
	linux-spi@vger.kernel.org
Subject: [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements
Date: Mon,  6 Jul 2020 16:34:33 +0200	[thread overview]
Message-ID: <20200706143443.9855-1-mkl@pengutronix.de> (raw)

Hello,

this series first fixes the calculation of the clock rate. The driver will
round up to the nearest clock rate instead of rounding down. Resulting in SPI
devices accessed with a too high SPI clock.

The remaining patches improve the performance of the driver. The changes range
from micro-optimizations like reducing MMIO writes to the controller to
reducing the number of needed interrupts in some use cases.

regards,
Marc

changes since v1:
- added Maxime Ripard's to the existing patches
- 06/10: (was 05/10 in v1)
  "spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it"
  use FIELD_GET instead of open coding it
  (tnx: Maxime Ripard)
- 05/10: "spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET()"
  new patch




_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-07-06 14:34 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-06 14:34 Marc Kleine-Budde [this message]
2020-07-06 14:34 ` [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 01/10] spi: spi-sun6i: sun6i_spi_transfer_one(): fix setting of clock rate Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 02/10] spi: spi-sun6i: sun6i_spi_transfer_one(): report effectivly used speed_hz of transfer Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 03/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove useless goto Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 04/10] spi: spi-sun6i: sun6i_spi_transfer_one(): remove not needed masking of transfer length Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 05/10] spi: spi-sun6i: sun6i_spi_get_tx_fifo_count: Convert manual shift+mask to FIELD_GET() Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 06/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): introduce sun6i_spi_get_rx_fifo_count() and make use of it Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 07/10] spi: spi-sun6i: sun6i_spi_drain_fifo(): remove not needed length argument Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 08/10] spi: spi-sun6i: sun6i_spi_fill_fifo(): " Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 09/10] spi: spi-sun6i: sun6i_spi_transfer_one(): collate write to Interrupt Control Register Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 14:34 ` [PATCH v2 10/10] spi: spi-sun6i: sun6i_spi_transfer_one(): enable RF_RDY interrupt only if needed Marc Kleine-Budde
2020-07-06 14:34   ` Marc Kleine-Budde
2020-07-06 15:40 ` [PATCH v2 00/10] spi: spi-sun6i: One fix and some improvements Mark Brown
2020-07-06 15:40   ` Mark Brown
2020-07-06 18:52 ` Mark Brown
2020-07-06 18:52   ` Mark Brown
2020-07-06 19:02 ` Mark Brown
2020-07-06 19:02   ` Mark Brown
2020-07-07 14:17 ` Mark Brown
2020-07-07 14:17   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200706143443.9855-1-mkl@pengutronix.de \
    --to=mkl@pengutronix.de \
    --cc=broonie@kernel.org \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mripard@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.