All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: Mark Brown <broonie@kernel.org>, linux-spi@vger.kernel.org
Cc: Linus Walleij <linus.walleij@linaro.org>, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH] spi: ppc4xx: Convert to use GPIO descriptors
Date: Tue, 14 Jul 2020 09:22:26 +0200	[thread overview]
Message-ID: <20200714072226.26071-1-linus.walleij@linaro.org> (raw)

This converts the PPC4xx SPI driver to use GPIO descriptors.

The driver is already just picking some GPIOs from the device
tree so the conversion is pretty straight forward. However
this driver is looking form a pure "gpios" property rather
than the standard binding "cs-gpios" so we need to add a new
exception to the gpiolib OF parser to allow this for this
driver's compatibles.

Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 drivers/gpio/gpiolib-of.c |  10 ++--
 drivers/spi/spi-ppc4xx.c  | 106 ++++----------------------------------
 2 files changed, 17 insertions(+), 99 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 219eb0054233..e3e88510aec7 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -26,7 +26,7 @@
 /**
  * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
  * Some elder GPIO controllers need special quirks. Currently we handle
- * the Freescale GPIO controller with bindings that doesn't use the
+ * the Freescale and PPC GPIO controller with bindings that doesn't use the
  * established "cs-gpios" for chip selects but instead rely on
  * "gpios" for the chip select lines. If we detect this, we redirect
  * the counting of "cs-gpios" to count "gpios" transparent to the
@@ -41,7 +41,8 @@ static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
 	if (!con_id || strcmp(con_id, "cs"))
 		return 0;
 	if (!of_device_is_compatible(np, "fsl,spi") &&
-	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
+	    !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
 		return 0;
 	return of_gpio_named_count(np, "gpios");
 }
@@ -405,9 +406,10 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,
 	if (!IS_ENABLED(CONFIG_SPI_MASTER))
 		return ERR_PTR(-ENOENT);
 
-	/* Allow this specifically for Freescale devices */
+	/* Allow this specifically for Freescale and PPC devices */
 	if (!of_device_is_compatible(np, "fsl,spi") &&
-	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
+	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl") &&
+	    !of_device_is_compatible(np, "ibm,ppc4xx-spi"))
 		return ERR_PTR(-ENOENT);
 	/* Allow only if asking for "cs-gpios" */
 	if (!con_id || strcmp(con_id, "cs"))
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 0ea2d9a369d9..d8ee363fb714 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -28,11 +28,9 @@
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/of_gpio.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 
-#include <linux/gpio.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/spi_bitbang.h>
 
@@ -127,8 +125,6 @@ struct ppc4xx_spi {
 	const unsigned char *tx;
 	unsigned char *rx;
 
-	int *gpios;
-
 	struct spi_ppc4xx_regs __iomem *regs; /* pointer to the registers */
 	struct spi_master *master;
 	struct device *dev;
@@ -260,27 +256,6 @@ static int spi_ppc4xx_setup(struct spi_device *spi)
 	return 0;
 }
 
-static void spi_ppc4xx_chipsel(struct spi_device *spi, int value)
-{
-	struct ppc4xx_spi *hw = spi_master_get_devdata(spi->master);
-	unsigned int cs = spi->chip_select;
-	unsigned int cspol;
-
-	/*
-	 * If there are no chip selects at all, or if this is the special
-	 * case of a non-existent (dummy) chip select, do nothing.
-	 */
-
-	if (!hw->master->num_chipselect || hw->gpios[cs] == -EEXIST)
-		return;
-
-	cspol = spi->mode & SPI_CS_HIGH ? 1 : 0;
-	if (value == BITBANG_CS_INACTIVE)
-		cspol = !cspol;
-
-	gpio_set_value(hw->gpios[cs], cspol);
-}
-
 static irqreturn_t spi_ppc4xx_int(int irq, void *dev_id)
 {
 	struct ppc4xx_spi *hw;
@@ -359,19 +334,6 @@ static void spi_ppc4xx_enable(struct ppc4xx_spi *hw)
 	dcri_clrset(SDR0, SDR0_PFC1, 0x80000000 >> 14, 0);
 }
 
-static void free_gpios(struct ppc4xx_spi *hw)
-{
-	if (hw->master->num_chipselect) {
-		int i;
-		for (i = 0; i < hw->master->num_chipselect; i++)
-			if (gpio_is_valid(hw->gpios[i]))
-				gpio_free(hw->gpios[i]);
-
-		kfree(hw->gpios);
-		hw->gpios = NULL;
-	}
-}
-
 /*
  * platform_device layer stuff...
  */
@@ -385,7 +347,6 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 	struct device *dev = &op->dev;
 	struct device_node *opbnp;
 	int ret;
-	int num_gpios;
 	const unsigned int *clk;
 
 	master = spi_alloc_master(dev, sizeof *hw);
@@ -399,74 +360,32 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 
 	init_completion(&hw->done);
 
-	/*
-	 * A count of zero implies a single SPI device without any chip-select.
-	 * Note that of_gpio_count counts all gpios assigned to this spi master.
-	 * This includes both "null" gpio's and real ones.
-	 */
-	num_gpios = of_gpio_count(np);
-	if (num_gpios > 0) {
-		int i;
-
-		hw->gpios = kcalloc(num_gpios, sizeof(*hw->gpios), GFP_KERNEL);
-		if (!hw->gpios) {
-			ret = -ENOMEM;
-			goto free_master;
-		}
-
-		for (i = 0; i < num_gpios; i++) {
-			int gpio;
-			enum of_gpio_flags flags;
-
-			gpio = of_get_gpio_flags(np, i, &flags);
-			hw->gpios[i] = gpio;
-
-			if (gpio_is_valid(gpio)) {
-				/* Real CS - set the initial state. */
-				ret = gpio_request(gpio, np->name);
-				if (ret < 0) {
-					dev_err(dev,
-						"can't request gpio #%d: %d\n",
-						i, ret);
-					goto free_gpios;
-				}
-
-				gpio_direction_output(gpio,
-						!!(flags & OF_GPIO_ACTIVE_LOW));
-			} else if (gpio == -EEXIST) {
-				; /* No CS, but that's OK. */
-			} else {
-				dev_err(dev, "invalid gpio #%d: %d\n", i, gpio);
-				ret = -EINVAL;
-				goto free_gpios;
-			}
-		}
-	}
-
 	/* Setup the state for the bitbang driver */
 	bbp = &hw->bitbang;
 	bbp->master = hw->master;
 	bbp->setup_transfer = spi_ppc4xx_setupxfer;
-	bbp->chipselect = spi_ppc4xx_chipsel;
 	bbp->txrx_bufs = spi_ppc4xx_txrx;
 	bbp->use_dma = 0;
 	bbp->master->setup = spi_ppc4xx_setup;
 	bbp->master->cleanup = spi_ppc4xx_cleanup;
 	bbp->master->bits_per_word_mask = SPI_BPW_MASK(8);
+	bbp->master->use_gpio_descriptors = true;
+	/*
+	 * The SPI core will count the number of GPIO descriptors to figure
+	 * out the number of chip selects available on the platform.
+	 */
+	bbp->master->num_chipselect = 0;
 
 	/* the spi->mode bits understood by this driver: */
 	bbp->master->mode_bits =
 		SPI_CPHA | SPI_CPOL | SPI_CS_HIGH | SPI_LSB_FIRST;
 
-	/* this many pins in all GPIO controllers */
-	bbp->master->num_chipselect = num_gpios > 0 ? num_gpios : 0;
-
 	/* Get the clock for the OPB */
 	opbnp = of_find_compatible_node(NULL, NULL, "ibm,opb");
 	if (opbnp == NULL) {
 		dev_err(dev, "OPB: cannot find node\n");
 		ret = -ENODEV;
-		goto free_gpios;
+		goto free_master;
 	}
 	/* Get the clock (Hz) for the OPB */
 	clk = of_get_property(opbnp, "clock-frequency", NULL);
@@ -474,7 +393,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 		dev_err(dev, "OPB: no clock-frequency property set\n");
 		of_node_put(opbnp);
 		ret = -ENODEV;
-		goto free_gpios;
+		goto free_master;
 	}
 	hw->opb_freq = *clk;
 	hw->opb_freq >>= 2;
@@ -483,7 +402,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 	ret = of_address_to_resource(np, 0, &resource);
 	if (ret) {
 		dev_err(dev, "error while parsing device node resource\n");
-		goto free_gpios;
+		goto free_master;
 	}
 	hw->mapbase = resource.start;
 	hw->mapsize = resource_size(&resource);
@@ -492,7 +411,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 	if (hw->mapsize < sizeof(struct spi_ppc4xx_regs)) {
 		dev_err(dev, "too small to map registers\n");
 		ret = -EINVAL;
-		goto free_gpios;
+		goto free_master;
 	}
 
 	/* Request IRQ */
@@ -501,7 +420,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 			  0, "spi_ppc4xx_of", (void *)hw);
 	if (ret) {
 		dev_err(dev, "unable to allocate interrupt\n");
-		goto free_gpios;
+		goto free_master;
 	}
 
 	if (!request_mem_region(hw->mapbase, hw->mapsize, DRIVER_NAME)) {
@@ -538,8 +457,6 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
 	release_mem_region(hw->mapbase, hw->mapsize);
 request_mem_error:
 	free_irq(hw->irqnum, hw);
-free_gpios:
-	free_gpios(hw);
 free_master:
 	spi_master_put(master);
 
@@ -556,7 +473,6 @@ static int spi_ppc4xx_of_remove(struct platform_device *op)
 	release_mem_region(hw->mapbase, hw->mapsize);
 	free_irq(hw->irqnum, hw);
 	iounmap(hw->regs);
-	free_gpios(hw);
 	spi_master_put(master);
 	return 0;
 }
-- 
2.26.2


             reply	other threads:[~2020-07-14  7:24 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-14  7:22 Linus Walleij [this message]
2020-07-22 13:45 ` [PATCH] spi: ppc4xx: Convert to use GPIO descriptors Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200714072226.26071-1-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=broonie@kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.