All of lore.kernel.org
 help / color / mirror / Atom feed
From: Coly Li <colyli@suse.de>
To: linux-bcache@vger.kernel.org
Cc: linux-block@vger.kernel.org, Coly Li <colyli@suse.de>
Subject: [PATCH v2 02/17] bcache: add read_super_basic() to read major part of super block
Date: Wed, 15 Jul 2020 13:45:57 +0800	[thread overview]
Message-ID: <20200715054612.6349-3-colyli@suse.de> (raw)
In-Reply-To: <20200715054612.6349-1-colyli@suse.de>

Later patches will introduce feature set bits to on-disk super block and
increase super block version. Current code in read_super() which reads
basic part of super block for version BCACHE_SB_VERSION_CDEV and version
BCACHE_SB_VERSION_CDEV_WITH_UUID will be shared with the new version.

Therefore this patch moves the reusable part into read_super_basic(),
this preparation patch will make later patches more simplier and only
focus on new feature set bits.

Signed-off-by: Coly Li <colyli@suse.de>
---
 drivers/md/bcache/super.c | 111 +++++++++++++++++++++-----------------
 1 file changed, 63 insertions(+), 48 deletions(-)

diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
index 7aa1d6737f66..74681fb92158 100644
--- a/drivers/md/bcache/super.c
+++ b/drivers/md/bcache/super.c
@@ -59,6 +59,67 @@ struct workqueue_struct *bch_journal_wq;
 
 /* Superblock */
 
+static const char *read_super_basic(struct cache_sb *sb,  struct block_device *bdev,
+				     struct cache_sb_disk *s)
+{
+	const char *err;
+	unsigned int i;
+
+	sb->nbuckets	= le64_to_cpu(s->nbuckets);
+	sb->bucket_size	= le16_to_cpu(s->bucket_size);
+
+	sb->nr_in_set	= le16_to_cpu(s->nr_in_set);
+	sb->nr_this_dev	= le16_to_cpu(s->nr_this_dev);
+
+	err = "Too many buckets";
+	if (sb->nbuckets > LONG_MAX)
+		goto err;
+
+	err = "Not enough buckets";
+	if (sb->nbuckets < 1 << 7)
+		goto err;
+
+	err = "Bad block/bucket size";
+	if (!is_power_of_2(sb->block_size) ||
+	    sb->block_size > PAGE_SECTORS ||
+	    !is_power_of_2(sb->bucket_size) ||
+	    sb->bucket_size < PAGE_SECTORS)
+		goto err;
+
+	err = "Invalid superblock: device too small";
+	if (get_capacity(bdev->bd_disk) <
+	    sb->bucket_size * sb->nbuckets)
+		goto err;
+
+	err = "Bad UUID";
+	if (bch_is_zero(sb->set_uuid, 16))
+		goto err;
+
+	err = "Bad cache device number in set";
+	if (!sb->nr_in_set ||
+	    sb->nr_in_set <= sb->nr_this_dev ||
+	    sb->nr_in_set > MAX_CACHES_PER_SET)
+		goto err;
+
+	err = "Journal buckets not sequential";
+	for (i = 0; i < sb->keys; i++)
+		if (sb->d[i] != sb->first_bucket + i)
+			goto err;
+
+	err = "Too many journal buckets";
+	if (sb->first_bucket + sb->keys > sb->nbuckets)
+		goto err;
+
+	err = "Invalid superblock: first bucket comes before end of super";
+	if (sb->first_bucket * sb->bucket_size < 16)
+		goto err;
+
+	err = NULL;
+err:
+	return err;
+}
+
+
 static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 			      struct cache_sb_disk **res)
 {
@@ -133,55 +194,9 @@ static const char *read_super(struct cache_sb *sb, struct block_device *bdev,
 		break;
 	case BCACHE_SB_VERSION_CDEV:
 	case BCACHE_SB_VERSION_CDEV_WITH_UUID:
-		sb->nbuckets	= le64_to_cpu(s->nbuckets);
-		sb->bucket_size	= le16_to_cpu(s->bucket_size);
-
-		sb->nr_in_set	= le16_to_cpu(s->nr_in_set);
-		sb->nr_this_dev	= le16_to_cpu(s->nr_this_dev);
-
-		err = "Too many buckets";
-		if (sb->nbuckets > LONG_MAX)
-			goto err;
-
-		err = "Not enough buckets";
-		if (sb->nbuckets < 1 << 7)
-			goto err;
-
-		err = "Bad block/bucket size";
-		if (!is_power_of_2(sb->block_size) ||
-		    sb->block_size > PAGE_SECTORS ||
-		    !is_power_of_2(sb->bucket_size) ||
-		    sb->bucket_size < PAGE_SECTORS)
-			goto err;
-
-		err = "Invalid superblock: device too small";
-		if (get_capacity(bdev->bd_disk) <
-		    sb->bucket_size * sb->nbuckets)
-			goto err;
-
-		err = "Bad UUID";
-		if (bch_is_zero(sb->set_uuid, 16))
-			goto err;
-
-		err = "Bad cache device number in set";
-		if (!sb->nr_in_set ||
-		    sb->nr_in_set <= sb->nr_this_dev ||
-		    sb->nr_in_set > MAX_CACHES_PER_SET)
-			goto err;
-
-		err = "Journal buckets not sequential";
-		for (i = 0; i < sb->keys; i++)
-			if (sb->d[i] != sb->first_bucket + i)
-				goto err;
-
-		err = "Too many journal buckets";
-		if (sb->first_bucket + sb->keys > sb->nbuckets)
-			goto err;
-
-		err = "Invalid superblock: first bucket comes before end of super";
-		if (sb->first_bucket * sb->bucket_size < 16)
+		err = read_super_basic(sb, bdev, s);
+		if (err)
 			goto err;
-
 		break;
 	default:
 		err = "Unsupported superblock version";
-- 
2.26.2


  parent reply	other threads:[~2020-07-15  5:46 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-15  5:45 [PATCH v2 00/17] bcache: extend bucket size to 32bit width Coly Li
2020-07-15  5:45 ` [PATCH v2 01/17] bcache: add comments to mark member offset of struct cache_sb_disk Coly Li
2020-07-15  6:02   ` Hannes Reinecke
2020-07-15  9:03     ` Coly Li
2020-07-15  9:08       ` Johannes Thumshirn
2020-07-15 10:35         ` Coly Li
2020-07-15  5:45 ` Coly Li [this message]
2020-07-15  6:03   ` [PATCH v2 02/17] bcache: add read_super_basic() to read major part of super block Hannes Reinecke
2020-07-15  5:45 ` [PATCH v2 03/17] bcache: add more accurate error information in read_super_basic() Coly Li
2020-07-15  6:04   ` Hannes Reinecke
2020-07-15  5:45 ` [PATCH v2 04/17] bcache: disassemble the big if() checks in bch_cache_set_alloc() Coly Li
2020-07-15  6:08   ` Hannes Reinecke
2020-07-15  5:46 ` [PATCH v2 05/17] bcache: fix super block seq numbers comparision in register_cache_set() Coly Li
2020-07-15  6:10   ` Hannes Reinecke
2020-07-15  5:46 ` [PATCH v2 06/17] bcache: increase super block version for cache device and backing device Coly Li
2020-07-15  6:11   ` Hannes Reinecke
2020-07-15  5:46 ` [PATCH v2 07/17] bcache: move bucket related code into read_super_basic() Coly Li
2020-07-15  6:44   ` Hannes Reinecke
2020-07-15  5:46 ` [PATCH v2 08/17] bcache: struct cache_sb is only for in-memory super block now Coly Li
2020-07-15  6:45   ` Hannes Reinecke
2020-07-15  5:46 ` [PATCH v2 09/17] bcache: introduce meta_bucket_pages() related helper routines Coly Li
2020-07-15  5:46 ` [PATCH v2 10/17] bcache: handle c->uuids properly for bucket size > 8MB Coly Li
2020-07-15  5:46 ` [PATCH v2 11/17] bcache: handle cache prio_buckets and disk_buckets " Coly Li
2020-07-15  5:46 ` [PATCH v2 12/17] bcache: handle cache set verify_ondisk " Coly Li
2020-07-15  5:46 ` [PATCH v2 13/17] bcache: handle btree node memory allocation " Coly Li
2020-07-15  5:46 ` [PATCH v2 14/17] bcache: add bucket_size_hi into struct cache_sb_disk for large bucket Coly Li
2020-07-15  5:46 ` [PATCH v2 15/17] bcache: add sysfs file to display feature sets information of cache set Coly Li
2020-07-15  5:46 ` [PATCH v2 16/17] bcache: avoid extra memory allocation from mempool c->fill_iter Coly Li
2020-07-15  5:46 ` [PATCH v2 17/17] bcache: avoid extra memory consumption in struct bbio for large bucket size Coly Li

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200715054612.6349-3-colyli@suse.de \
    --to=colyli@suse.de \
    --cc=linux-bcache@vger.kernel.org \
    --cc=linux-block@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.