From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCHv1 1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node
Date: Wed, 15 Jul 2020 16:02:07 +0000 [thread overview]
Message-ID: <20200715160209.652-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20200715160209.652-1-linux.amoon@gmail.com>
Enable RTC PCF8563 node on Odroid-N2 SBC, In order
to support the RTC wakealarm feature for suspend and resume.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
$ sudo hwclock -r && date
2020-07-15 13:11:53.862508+00:00
Wed Jul 15 13:11:54 UTC 2020
$ hwclock --show
2020-07-15 13:17:30.903300+00:00
But RTC wake up is not working at my end.
Any inputs are welcome.
$ time rtcwake -s 30 -m mem
rtcwake: /dev/rtc0 not enabled for wakeup events
real 0m0.002s
user 0m0.002s
sys 0m0.000s
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 169ea283d4ee..a447cba4dd53 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -391,6 +391,20 @@ hdmi_tx_tmds_out: endpoint {
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtc: rtc@51 {
+ reg = <0x51>;
+ compatible = "nxp,pcf8563";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "rtc_clkout";
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
--
2.27.0
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCHv1 1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node
Date: Wed, 15 Jul 2020 16:02:07 +0000 [thread overview]
Message-ID: <20200715160209.652-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20200715160209.652-1-linux.amoon@gmail.com>
Enable RTC PCF8563 node on Odroid-N2 SBC, In order
to support the RTC wakealarm feature for suspend and resume.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
$ sudo hwclock -r && date
2020-07-15 13:11:53.862508+00:00
Wed Jul 15 13:11:54 UTC 2020
$ hwclock --show
2020-07-15 13:17:30.903300+00:00
But RTC wake up is not working at my end.
Any inputs are welcome.
$ time rtcwake -s 30 -m mem
rtcwake: /dev/rtc0 not enabled for wakeup events
real 0m0.002s
user 0m0.002s
sys 0m0.000s
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 169ea283d4ee..a447cba4dd53 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -391,6 +391,20 @@ hdmi_tx_tmds_out: endpoint {
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtc: rtc@51 {
+ reg = <0x51>;
+ compatible = "nxp,pcf8563";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "rtc_clkout";
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Anand Moon <linux.amoon@gmail.com>
To: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>,
Neil Armstrong <narmstrong@baylibre.com>,
Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
Kevin Hilman <khilman@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Jerome Brunet <jbrunet@baylibre.com>
Subject: [PATCHv1 1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node
Date: Wed, 15 Jul 2020 16:02:07 +0000 [thread overview]
Message-ID: <20200715160209.652-2-linux.amoon@gmail.com> (raw)
In-Reply-To: <20200715160209.652-1-linux.amoon@gmail.com>
Enable RTC PCF8563 node on Odroid-N2 SBC, In order
to support the RTC wakealarm feature for suspend and resume.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
$ sudo hwclock -r && date
2020-07-15 13:11:53.862508+00:00
Wed Jul 15 13:11:54 UTC 2020
$ hwclock --show
2020-07-15 13:17:30.903300+00:00
But RTC wake up is not working at my end.
Any inputs are welcome.
$ time rtcwake -s 30 -m mem
rtcwake: /dev/rtc0 not enabled for wakeup events
real 0m0.002s
user 0m0.002s
sys 0m0.000s
---
.../boot/dts/amlogic/meson-g12b-odroid-n2.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 169ea283d4ee..a447cba4dd53 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -391,6 +391,20 @@ hdmi_tx_tmds_out: endpoint {
};
};
+&i2c3 {
+ pinctrl-0 = <&i2c3_sda_a_pins>, <&i2c3_sck_a_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ rtc: rtc@51 {
+ reg = <0x51>;
+ compatible = "nxp,pcf8563";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "rtc_clkout";
+ };
+};
+
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
--
2.27.0
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-07-15 16:03 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-15 16:02 [PATCHv1 0/3] Enable RTC on Odroid N2 Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-15 16:02 ` Anand Moon [this message]
2020-07-15 16:02 ` [PATCHv1 1/3] arm64: dts: meson-g12b-odroid-n2: Enable RTC controller node Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-16 7:08 ` Neil Armstrong
2020-07-16 7:08 ` Neil Armstrong
2020-07-16 7:08 ` Neil Armstrong
2020-07-16 8:02 ` Anand Moon
2020-07-16 8:02 ` Anand Moon
2020-07-16 8:02 ` Anand Moon
2020-07-16 8:08 ` Jerome Brunet
2020-07-16 8:08 ` Jerome Brunet
2020-07-16 8:08 ` Jerome Brunet
2020-07-16 9:12 ` Anand Moon
2020-07-16 9:12 ` Anand Moon
2020-07-16 9:12 ` Anand Moon
2020-07-15 16:02 ` [PATCHv1 2/3] arm64: dts: meson-g12b-odroid-n2: Disable virtual wake RTC Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-16 7:05 ` Neil Armstrong
2020-07-16 7:05 ` Neil Armstrong
2020-07-16 7:05 ` Neil Armstrong
2020-07-16 7:19 ` Anand Moon
2020-07-16 7:19 ` Anand Moon
2020-07-16 7:19 ` Anand Moon
2020-07-15 16:02 ` [PATCHv1 3/3] arm64: defconfig: Enable RTC devices for Amlogic boards Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-15 16:02 ` Anand Moon
2020-07-16 7:08 ` Neil Armstrong
2020-07-16 7:08 ` Neil Armstrong
2020-07-16 7:08 ` Neil Armstrong
2020-07-16 7:05 ` [PATCHv1 0/3] Enable RTC on Odroid N2 Neil Armstrong
2020-07-16 7:05 ` Neil Armstrong
2020-07-16 7:05 ` Neil Armstrong
2020-07-16 8:14 ` Anand Moon
2020-07-16 8:14 ` Anand Moon
2020-07-16 8:14 ` Anand Moon
2020-07-16 8:20 ` Neil Armstrong
2020-07-16 8:20 ` Neil Armstrong
2020-07-16 8:20 ` Neil Armstrong
2020-07-16 8:35 ` Neil Armstrong
2020-07-16 8:35 ` Neil Armstrong
2020-07-16 8:35 ` Neil Armstrong
2020-07-16 15:42 ` Anand Moon
2020-07-16 15:42 ` Anand Moon
2020-07-16 15:42 ` Anand Moon
2020-07-16 21:28 ` Kevin Hilman
2020-07-16 21:28 ` Kevin Hilman
2020-07-16 21:28 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200715160209.652-2-linux.amoon@gmail.com \
--to=linux.amoon@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jbrunet@baylibre.com \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=mark.rutland@arm.com \
--cc=martin.blumenstingl@googlemail.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.