From: Grygorii Strashko <grygorii.strashko@ti.com> To: Peter Ujfalusi <peter.ujfalusi@ti.com>, Rob Herring <robh+dt@kernel.org>, Santosh Shilimkar <ssantosh@kernel.org>, Vinod Koul <vkoul@kernel.org> Cc: <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com>, <dmaengine@vger.kernel.org>, Sekhar Nori <nsekhar@ti.com>, Grygorii Strashko <grygorii.strashko@ti.com> Subject: [PATCH next v2 6/6] dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair Date: Fri, 17 Jul 2020 16:20:19 +0300 [thread overview] Message-ID: <20200717132019.20427-7-grygorii.strashko@ti.com> (raw) In-Reply-To: <20200717132019.20427-1-grygorii.strashko@ti.com> From: Peter Ujfalusi <peter.ujfalusi@ti.com> We only request ring pairs via K3 DMA driver, switch to use the new k3_ringacc_request_rings_pair() to simplify the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> --- drivers/dma/ti/k3-udma-glue.c | 42 +++++++++++------------------------ drivers/dma/ti/k3-udma.c | 34 +++++++++------------------- 2 files changed, 24 insertions(+), 52 deletions(-) diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c index 64c8955e0cf1..c888ae4fec96 100644 --- a/drivers/dma/ti/k3-udma-glue.c +++ b/drivers/dma/ti/k3-udma-glue.c @@ -271,20 +271,12 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev, atomic_set(&tx_chn->free_pkts, cfg->txcq_cfg.size); /* request and cfg rings */ - tx_chn->ringtx = k3_ringacc_request_ring(tx_chn->common.ringacc, - tx_chn->udma_tchan_id, 0); - if (!tx_chn->ringtx) { - ret = -ENODEV; - dev_err(dev, "Failed to get TX ring %u\n", - tx_chn->udma_tchan_id); - goto err; - } - - tx_chn->ringtxcq = k3_ringacc_request_ring(tx_chn->common.ringacc, - -1, 0); - if (!tx_chn->ringtxcq) { - ret = -ENODEV; - dev_err(dev, "Failed to get TXCQ ring\n"); + ret = k3_ringacc_request_rings_pair(tx_chn->common.ringacc, + tx_chn->udma_tchan_id, -1, + &tx_chn->ringtx, + &tx_chn->ringtxcq); + if (ret) { + dev_err(dev, "Failed to get TX/TXCQ rings %d\n", ret); goto err; } @@ -587,22 +579,16 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn, } /* request and cfg rings */ - flow->ringrx = k3_ringacc_request_ring(rx_chn->common.ringacc, - flow_cfg->ring_rxq_id, 0); - if (!flow->ringrx) { - ret = -ENODEV; - dev_err(dev, "Failed to get RX ring\n"); + ret = k3_ringacc_request_rings_pair(rx_chn->common.ringacc, + flow_cfg->ring_rxq_id, + flow_cfg->ring_rxfdq0_id, + &flow->ringrxfdq, + &flow->ringrx); + if (ret) { + dev_err(dev, "Failed to get RX/RXFDQ rings %d\n", ret); goto err_rflow_put; } - flow->ringrxfdq = k3_ringacc_request_ring(rx_chn->common.ringacc, - flow_cfg->ring_rxfdq0_id, 0); - if (!flow->ringrxfdq) { - ret = -ENODEV; - dev_err(dev, "Failed to get RXFDQ ring\n"); - goto err_ringrx_free; - } - ret = k3_ringacc_ring_cfg(flow->ringrx, &flow_cfg->rx_cfg); if (ret) { dev_err(dev, "Failed to cfg ringrx %d\n", ret); @@ -673,8 +659,6 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn, err_ringrxfdq_free: k3_ringacc_ring_free(flow->ringrxfdq); - -err_ringrx_free: k3_ringacc_ring_free(flow->ringrx); err_rflow_put: diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 6c879a734360..49d0d3af6311 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1418,17 +1418,12 @@ static int udma_alloc_tx_resources(struct udma_chan *uc) if (ret) return ret; - uc->tchan->t_ring = k3_ringacc_request_ring(ud->ringacc, - uc->tchan->id, 0); - if (!uc->tchan->t_ring) { - ret = -EBUSY; - goto err_tx_ring; - } - - uc->tchan->tc_ring = k3_ringacc_request_ring(ud->ringacc, -1, 0); - if (!uc->tchan->tc_ring) { + ret = k3_ringacc_request_rings_pair(ud->ringacc, uc->tchan->id, -1, + &uc->tchan->t_ring, + &uc->tchan->tc_ring); + if (ret) { ret = -EBUSY; - goto err_txc_ring; + goto err_ring; } memset(&ring_cfg, 0, sizeof(ring_cfg)); @@ -1447,10 +1442,9 @@ static int udma_alloc_tx_resources(struct udma_chan *uc) err_ringcfg: k3_ringacc_ring_free(uc->tchan->tc_ring); uc->tchan->tc_ring = NULL; -err_txc_ring: k3_ringacc_ring_free(uc->tchan->t_ring); uc->tchan->t_ring = NULL; -err_tx_ring: +err_ring: udma_put_tchan(uc); return ret; @@ -1499,16 +1493,11 @@ static int udma_alloc_rx_resources(struct udma_chan *uc) rflow = uc->rflow; fd_ring_id = ud->tchan_cnt + ud->echan_cnt + uc->rchan->id; - rflow->fd_ring = k3_ringacc_request_ring(ud->ringacc, fd_ring_id, 0); - if (!rflow->fd_ring) { - ret = -EBUSY; - goto err_rx_ring; - } - - rflow->r_ring = k3_ringacc_request_ring(ud->ringacc, -1, 0); - if (!rflow->r_ring) { + ret = k3_ringacc_request_rings_pair(ud->ringacc, fd_ring_id, -1, + &rflow->fd_ring, &rflow->r_ring); + if (ret) { ret = -EBUSY; - goto err_rxc_ring; + goto err_ring; } memset(&ring_cfg, 0, sizeof(ring_cfg)); @@ -1533,10 +1522,9 @@ static int udma_alloc_rx_resources(struct udma_chan *uc) err_ringcfg: k3_ringacc_ring_free(rflow->r_ring); rflow->r_ring = NULL; -err_rxc_ring: k3_ringacc_ring_free(rflow->fd_ring); rflow->fd_ring = NULL; -err_rx_ring: +err_ring: udma_put_rflow(uc); err_rflow: udma_put_rchan(uc); -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Grygorii Strashko <grygorii.strashko@ti.com> To: Peter Ujfalusi <peter.ujfalusi@ti.com>, Rob Herring <robh+dt@kernel.org>, Santosh Shilimkar <ssantosh@kernel.org>, Vinod Koul <vkoul@kernel.org> Cc: Grygorii Strashko <grygorii.strashko@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>, Sekhar Nori <nsekhar@ti.com>, linux-kernel@vger.kernel.org, dmaengine@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH next v2 6/6] dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair Date: Fri, 17 Jul 2020 16:20:19 +0300 [thread overview] Message-ID: <20200717132019.20427-7-grygorii.strashko@ti.com> (raw) In-Reply-To: <20200717132019.20427-1-grygorii.strashko@ti.com> From: Peter Ujfalusi <peter.ujfalusi@ti.com> We only request ring pairs via K3 DMA driver, switch to use the new k3_ringacc_request_rings_pair() to simplify the code. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Vinod Koul <vkoul@kernel.org> --- drivers/dma/ti/k3-udma-glue.c | 42 +++++++++++------------------------ drivers/dma/ti/k3-udma.c | 34 +++++++++------------------- 2 files changed, 24 insertions(+), 52 deletions(-) diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c index 64c8955e0cf1..c888ae4fec96 100644 --- a/drivers/dma/ti/k3-udma-glue.c +++ b/drivers/dma/ti/k3-udma-glue.c @@ -271,20 +271,12 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev, atomic_set(&tx_chn->free_pkts, cfg->txcq_cfg.size); /* request and cfg rings */ - tx_chn->ringtx = k3_ringacc_request_ring(tx_chn->common.ringacc, - tx_chn->udma_tchan_id, 0); - if (!tx_chn->ringtx) { - ret = -ENODEV; - dev_err(dev, "Failed to get TX ring %u\n", - tx_chn->udma_tchan_id); - goto err; - } - - tx_chn->ringtxcq = k3_ringacc_request_ring(tx_chn->common.ringacc, - -1, 0); - if (!tx_chn->ringtxcq) { - ret = -ENODEV; - dev_err(dev, "Failed to get TXCQ ring\n"); + ret = k3_ringacc_request_rings_pair(tx_chn->common.ringacc, + tx_chn->udma_tchan_id, -1, + &tx_chn->ringtx, + &tx_chn->ringtxcq); + if (ret) { + dev_err(dev, "Failed to get TX/TXCQ rings %d\n", ret); goto err; } @@ -587,22 +579,16 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn, } /* request and cfg rings */ - flow->ringrx = k3_ringacc_request_ring(rx_chn->common.ringacc, - flow_cfg->ring_rxq_id, 0); - if (!flow->ringrx) { - ret = -ENODEV; - dev_err(dev, "Failed to get RX ring\n"); + ret = k3_ringacc_request_rings_pair(rx_chn->common.ringacc, + flow_cfg->ring_rxq_id, + flow_cfg->ring_rxfdq0_id, + &flow->ringrxfdq, + &flow->ringrx); + if (ret) { + dev_err(dev, "Failed to get RX/RXFDQ rings %d\n", ret); goto err_rflow_put; } - flow->ringrxfdq = k3_ringacc_request_ring(rx_chn->common.ringacc, - flow_cfg->ring_rxfdq0_id, 0); - if (!flow->ringrxfdq) { - ret = -ENODEV; - dev_err(dev, "Failed to get RXFDQ ring\n"); - goto err_ringrx_free; - } - ret = k3_ringacc_ring_cfg(flow->ringrx, &flow_cfg->rx_cfg); if (ret) { dev_err(dev, "Failed to cfg ringrx %d\n", ret); @@ -673,8 +659,6 @@ static int k3_udma_glue_cfg_rx_flow(struct k3_udma_glue_rx_channel *rx_chn, err_ringrxfdq_free: k3_ringacc_ring_free(flow->ringrxfdq); - -err_ringrx_free: k3_ringacc_ring_free(flow->ringrx); err_rflow_put: diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 6c879a734360..49d0d3af6311 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -1418,17 +1418,12 @@ static int udma_alloc_tx_resources(struct udma_chan *uc) if (ret) return ret; - uc->tchan->t_ring = k3_ringacc_request_ring(ud->ringacc, - uc->tchan->id, 0); - if (!uc->tchan->t_ring) { - ret = -EBUSY; - goto err_tx_ring; - } - - uc->tchan->tc_ring = k3_ringacc_request_ring(ud->ringacc, -1, 0); - if (!uc->tchan->tc_ring) { + ret = k3_ringacc_request_rings_pair(ud->ringacc, uc->tchan->id, -1, + &uc->tchan->t_ring, + &uc->tchan->tc_ring); + if (ret) { ret = -EBUSY; - goto err_txc_ring; + goto err_ring; } memset(&ring_cfg, 0, sizeof(ring_cfg)); @@ -1447,10 +1442,9 @@ static int udma_alloc_tx_resources(struct udma_chan *uc) err_ringcfg: k3_ringacc_ring_free(uc->tchan->tc_ring); uc->tchan->tc_ring = NULL; -err_txc_ring: k3_ringacc_ring_free(uc->tchan->t_ring); uc->tchan->t_ring = NULL; -err_tx_ring: +err_ring: udma_put_tchan(uc); return ret; @@ -1499,16 +1493,11 @@ static int udma_alloc_rx_resources(struct udma_chan *uc) rflow = uc->rflow; fd_ring_id = ud->tchan_cnt + ud->echan_cnt + uc->rchan->id; - rflow->fd_ring = k3_ringacc_request_ring(ud->ringacc, fd_ring_id, 0); - if (!rflow->fd_ring) { - ret = -EBUSY; - goto err_rx_ring; - } - - rflow->r_ring = k3_ringacc_request_ring(ud->ringacc, -1, 0); - if (!rflow->r_ring) { + ret = k3_ringacc_request_rings_pair(ud->ringacc, fd_ring_id, -1, + &rflow->fd_ring, &rflow->r_ring); + if (ret) { ret = -EBUSY; - goto err_rxc_ring; + goto err_ring; } memset(&ring_cfg, 0, sizeof(ring_cfg)); @@ -1533,10 +1522,9 @@ static int udma_alloc_rx_resources(struct udma_chan *uc) err_ringcfg: k3_ringacc_ring_free(rflow->r_ring); rflow->r_ring = NULL; -err_rxc_ring: k3_ringacc_ring_free(rflow->fd_ring); rflow->fd_ring = NULL; -err_rx_ring: +err_ring: udma_put_rflow(uc); err_rflow: udma_put_rchan(uc); -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-17 13:21 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-17 13:20 [PATCH next v2 0/6] soc: ti: k3-ringacc: updates Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko 2020-07-17 13:20 ` [PATCH next v2 1/6] dt-bindings: soc: ti: k3-ringacc: convert bindings to json-schema Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko 2020-07-17 13:20 ` [PATCH next v2 2/6] soc: ti: k3-ringacc: Move state tracking variables under a struct Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko 2020-07-17 13:20 ` [PATCH next v2 3/6] soc: ti: k3-ringacc: add ring's flags to dump Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko 2020-07-17 13:20 ` [PATCH next v2 4/6] soc: ti: k3-ringacc: add request pair of rings api Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko 2020-07-17 13:20 ` [PATCH next v2 5/6] soc: ti: k3-ringacc: separate soc specific initialization Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko 2020-07-17 13:20 ` Grygorii Strashko [this message] 2020-07-17 13:20 ` [PATCH next v2 6/6] dmaengine: ti: k3-udma: Switch to k3_ringacc_request_rings_pair Grygorii Strashko 2020-07-17 16:55 ` [PATCH next v2 0/6] soc: ti: k3-ringacc: updates santosh.shilimkar 2020-07-17 16:55 ` santosh.shilimkar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200717132019.20427-7-grygorii.strashko@ti.com \ --to=grygorii.strashko@ti.com \ --cc=dmaengine@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nsekhar@ti.com \ --cc=peter.ujfalusi@ti.com \ --cc=robh+dt@kernel.org \ --cc=ssantosh@kernel.org \ --cc=vigneshr@ti.com \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.