All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
To: robh+dt@kernel.org, devicetree@vger.kernel.org
Cc: "Jacopo Mondi" <jacopo+renesas@jmondi.org>,
	slongerbeam@gmail.com, linux-media@vger.kernel.org,
	laurent.pinchart@ideasonboard.com,
	linux-renesas-soc@vger.kernel.org,
	"Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	linux-omap@vger.kernel.org, "Shawn Guo" <shawnguo@kernel.org>,
	"Sascha Hauer" <s.hauer@pengutronix.de>,
	"Pengutronix Kernel Team" <kernel@pengutronix.de>,
	"Fabio Estevam" <festevam@gmail.com>,
	"NXP Linux Team" <linux-imx@nxp.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@st.com>,
	linux-stm32@st-md-mailman.stormreply.com (moderated
	list:ARM/STM32 ARCHITECTURE),
	"Maxime Ripard" <mripard@kernel.org>,
	"Chen-Yu Tsai" <wens@csie.org>, "Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Tero Kristo" <t-kristo@ti.com>, "Nishanth Menon" <nm@ti.com>
Subject: [PATCH 05/13] dt-bindings: media: ov5640: Make bus-type mandatory
Date: Fri, 17 Jul 2020 15:28:51 +0200	[thread overview]
Message-ID: <20200717132859.237120-6-jacopo+renesas@jmondi.org> (raw)
In-Reply-To: <20200717132859.237120-1-jacopo+renesas@jmondi.org>

The ov5640 driver supports both a parallel data interface and a
CSI-2 serial data interface.

Depending on which interface is in use, the required endpoint
properties are different. In order to be able to validate if a
device node is compliant with the dt-schema bindings, start by
making the bus-type a mandatory property, and add it to all the
existing users of ov5640 in mainline DTS.

On top of this, endpoint properties validation will be implemented,
conditionally to the reported bus type.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
 Documentation/devicetree/bindings/media/i2c/ov5640.yaml    | 6 ++++++
 arch/arm/boot/dts/dra72-evm-common.dtsi                    | 1 +
 arch/arm/boot/dts/dra76-evm.dts                            | 1 +
 arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi              | 1 +
 arch/arm/boot/dts/imx6qdl-icore.dtsi                       | 1 +
 arch/arm/boot/dts/imx6qdl-sabrelite.dtsi                   | 1 +
 arch/arm/boot/dts/imx6qdl-sabresd.dtsi                     | 1 +
 arch/arm/boot/dts/stm32mp157c-ev1.dts                      | 1 +
 arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts | 1 +
 arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts       | 1 +
 arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi                  | 1 +
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts             | 1 +
 12 files changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5640.yaml b/Documentation/devicetree/bindings/media/i2c/ov5640.yaml
index 503f8b78615c..16e6c2dc629a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5640.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov5640.yaml
@@ -73,6 +73,9 @@ properties:
           remote-endpoint:
             description: A phandle to the bus receiver's endpoint node.

+          bus-type:
+            enum: [4, 5]
+
           clock-lanes:
             const: 0

@@ -109,6 +112,7 @@ properties:

         required:
           - remote-endpoint
+          - bus-type

     additionalProperties: false

@@ -146,6 +150,7 @@ examples:
             port {
                 ov5640_to_mipi_csi2: endpoint {
                     remote-endpoint = <&mipi_csi2_from_ov5640>;
+                    bus-type = <4>;
                     clock-lanes = <0>;
                     data-lanes = <1 2>;
                 };
@@ -172,6 +177,7 @@ examples:
             port {
                 ov5640_to_parallel: endpoint {
                     remote-endpoint = <&parallel_from_ov5640>;
+                    bus-type = <5>;
                     bus-width = <10>;
                 };
             };
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index c84b63bf0fc8..aba7eb55525d 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -287,6 +287,7 @@ ov5640@3c {
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2_phy0>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 820a0ece20d4..ddf16e65ec7f 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -420,6 +420,7 @@ ov5640@3c {
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2_phy0>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
index 9e027b9a5f91..dd5765778e87 100644
--- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
+++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
@@ -274,6 +274,7 @@ ov5640: camera@10 {
 		port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
diff --git a/arch/arm/boot/dts/imx6qdl-icore.dtsi b/arch/arm/boot/dts/imx6qdl-icore.dtsi
index 756f3a9f1b4f..2b1f275b8cc4 100644
--- a/arch/arm/boot/dts/imx6qdl-icore.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-icore.dtsi
@@ -213,6 +213,7 @@ ov5640: camera@3c {
 		port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 8468216dae9b..5752abb48e68 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -382,6 +382,7 @@ ov5640: camera@40 {
 		port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 28b35ccb3757..990f4cc345da 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -313,6 +313,7 @@ rev B board is VGEN5 */
 		port {
 			ov5640_to_mipi_csi2: endpoint {
 				remote-endpoint = <&mipi_csi2_in>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index b19056557ef0..613ede73b65b 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -190,6 +190,7 @@ ov5640: camera@3c {
 		port {
 			ov5640_0: endpoint {
 				remote-endpoint = <&dcmi_0>;
+				bus-type = <5>;
 				bus-width = <8>;
 				data-shift = <2>; /* lines 9:2 are used */
 				hsync-active = <0>;
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
index c7bd73f35ed8..6ef528bb5564 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-amarula-relic.dts
@@ -46,6 +46,7 @@ ov5640: camera@3c {
 			port {
 				ov5640_ep: endpoint {
 					remote-endpoint = <&csi_ep>;
+					bus-type = <5>;
 					bus-width = <8>;
 					hsync-active = <1>; /* Active high */
 					vsync-active = <0>; /* Active low */
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
index dc4ab6b434f9..8ebd6547786e 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts
@@ -61,6 +61,7 @@ ov5640: camera@3c {
 			port {
 				ov5640_ep: endpoint {
 					remote-endpoint = <&csi_ep>;
+					bus-type = <5>;
 					bus-width = <8>;
 					hsync-active = <1>; /* Active high */
 					vsync-active = <0>; /* Active low */
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index fe6613676e45..5c79ad5e7b5d 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -627,6 +627,7 @@ camera_rear@3b {

 		port {
 			ov5640_ep: endpoint {
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 				remote-endpoint = <&csiphy0_ep>;
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 2f3d3316a1cf..33f4eceffbe5 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -254,6 +254,7 @@ ov5640@3c {
 		port {
 			csi2_cam0: endpoint {
 				remote-endpoint = <&csi2_phy0>;
+				bus-type = <4>;
 				clock-lanes = <0>;
 				data-lanes = <1 2>;
 			};
--
2.27.0


  parent reply	other threads:[~2020-07-17 13:25 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-17 13:28 [PATCH 00/13] dt-bindings: media: ov5640: Convert to json-schema Jacopo Mondi
2020-07-17 13:28 ` [PATCH 01/13] " Jacopo Mondi
2020-07-17 19:28   ` Laurent Pinchart
2020-07-20 16:32   ` Rob Herring
2020-07-17 13:28 ` [PATCH 02/13] arm64: dts: qcom: apq8016-sbc: Fix CSI-2 lanes routing Jacopo Mondi
2020-07-17 19:35   ` Laurent Pinchart
2020-07-22  8:14     ` Loic Poulain
2020-07-22  8:34       ` Jacopo Mondi
2020-07-17 13:28 ` [PATCH 03/13] dt-bindings: media: ov5640: Do not limit rotation Jacopo Mondi
2020-07-17 19:38   ` Laurent Pinchart
2020-07-20 19:36     ` Rob Herring
2020-07-17 13:28 ` [PATCH 04/13] dt-bindings: media: ti,cal: Remove sensor from example Jacopo Mondi
2020-07-17 19:39   ` Laurent Pinchart
2020-07-23 20:57   ` Rob Herring
2020-07-17 13:28 ` Jacopo Mondi [this message]
2020-07-17 15:48   ` [PATCH 05/13] dt-bindings: media: ov5640: Make bus-type mandatory Fabio Estevam
2020-07-17 19:48   ` Laurent Pinchart
2020-07-20 19:45   ` Rob Herring
2020-07-17 13:28 ` [PATCH 06/13] dt-bindings: media: ov5640: Require ep properties Jacopo Mondi
2020-07-17 19:50   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 07/13] dt-bindings: media: ov5640: Remove clock-lanes Jacopo Mondi
2020-07-17 20:48   ` Laurent Pinchart
2020-07-20 19:47   ` Rob Herring
2020-07-17 13:28 ` [PATCH 08/13] dt-bindings: media: ov5640: Remove data-shift Jacopo Mondi
2020-07-17 20:57   ` Laurent Pinchart
2020-07-23 22:22     ` Sakari Ailus
2020-07-23 23:15       ` Laurent Pinchart
2020-07-25 21:18         ` Sakari Ailus
2020-07-25 21:31           ` Laurent Pinchart
2020-07-29 14:29             ` Sakari Ailus
2020-07-29 14:46               ` Laurent Pinchart
2020-07-30 16:22                 ` Sakari Ailus
2020-07-30 16:32                   ` Laurent Pinchart
2020-07-30 16:43                     ` Sakari Ailus
2020-07-17 13:28 ` [PATCH 09/13] dt-bindings: media: ov5640: Add default for synch signals Jacopo Mondi
2020-07-17 20:59   ` Laurent Pinchart
2020-07-20 19:50     ` Rob Herring
2020-07-17 13:28 ` [PATCH 10/13] dt-bindings: media: ov5640: Demote DVP required properties Jacopo Mondi
2020-07-17 21:00   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 11/13] media: i2c: ov5640: Initialize DVP polarities as default Jacopo Mondi
2020-07-17 21:02   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 12/13] MAINTAINERS: ov5640: Add bindings file Jacopo Mondi
2020-07-17 21:03   ` Laurent Pinchart
2020-07-17 13:28 ` [PATCH 13/13] dt-bindings: media: ov5640: Add myself as co-maintainer Jacopo Mondi
2020-07-17 21:03   ` Laurent Pinchart
2020-07-17 19:31 ` [PATCH 00/13] dt-bindings: media: ov5640: Convert to json-schema Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200717132859.237120-6-jacopo+renesas@jmondi.org \
    --to=jacopo+renesas@jmondi.org \
    --cc=agross@kernel.org \
    --cc=alexandre.torgue@st.com \
    --cc=bcousson@baylibre.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-imx@nxp.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mripard@kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    --cc=slongerbeam@gmail.com \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.