From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com> Subject: [PATCH] ARM: dts: at91: sama5d3_xplained: change phy-mode Date: Sat, 18 Jul 2020 01:36:44 +0200 [thread overview] Message-ID: <20200717233644.841080-1-alexandre.belloni@bootlin.com> (raw) Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY"), networking is broken on sama5d3 xplained. The device tree has phy-mode = "rgmii" and this worked before, because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 61f068a7b362..7abf555cd2fe 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -128,7 +128,7 @@ vddana_reg: LDO_REG2 { }; macb0: ethernet@f0028000 { - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; #address-cells = <1>; #size-cells = <0>; status = "okay"; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>, Ludovic Desroches <ludovic.desroches@microchip.com>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH] ARM: dts: at91: sama5d3_xplained: change phy-mode Date: Sat, 18 Jul 2020 01:36:44 +0200 [thread overview] Message-ID: <20200717233644.841080-1-alexandre.belloni@bootlin.com> (raw) Since commit bcf3440c6dd7 ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY"), networking is broken on sama5d3 xplained. The device tree has phy-mode = "rgmii" and this worked before, because KSZ9031 PHY started with default RGMII internal delays configuration (TX off, RX on 1.2 ns) and MAC provided TX delay. After above commit, the KSZ9031 PHY starts handling phy mode properly and disables RX delay, as result networking is become broken. Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous behavior. Fixes: bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY") Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/arm/boot/dts/at91-sama5d3_xplained.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 61f068a7b362..7abf555cd2fe 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -128,7 +128,7 @@ vddana_reg: LDO_REG2 { }; macb0: ethernet@f0028000 { - phy-mode = "rgmii"; + phy-mode = "rgmii-rxid"; #address-cells = <1>; #size-cells = <0>; status = "okay"; -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-07-17 23:36 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-17 23:36 Alexandre Belloni [this message] 2020-07-17 23:36 ` [PATCH] ARM: dts: at91: sama5d3_xplained: change phy-mode Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200717233644.841080-1-alexandre.belloni@bootlin.com \ --to=alexandre.belloni@bootlin.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=ludovic.desroches@microchip.com \ --cc=nicolas.ferre@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.