From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4
Date: Sun, 19 Jul 2020 02:45:46 +0000 [thread overview]
Message-ID: <20200719024548.8940-2-christianshewitt@gmail.com> (raw)
In-Reply-To: <20200719024548.8940-1-christianshewitt@gmail.com>
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
#include "meson-sm1.dtsi"
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "SM1-ODROID-C4";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
};
&cpu0 {
@@ -237,6 +301,18 @@
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&gpio {
gpio-line-names =
/* GPIOZ */
@@ -381,6 +457,18 @@
vqmmc-supply = <&flash_1v8>;
};
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4
Date: Sun, 19 Jul 2020 02:45:46 +0000 [thread overview]
Message-ID: <20200719024548.8940-2-christianshewitt@gmail.com> (raw)
In-Reply-To: <20200719024548.8940-1-christianshewitt@gmail.com>
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
#include "meson-sm1.dtsi"
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "SM1-ODROID-C4";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
};
&cpu0 {
@@ -237,6 +301,18 @@
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&gpio {
gpio-line-names =
/* GPIOZ */
@@ -381,6 +457,18 @@
vqmmc-supply = <&flash_1v8>;
};
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Christian Hewitt <christianshewitt@gmail.com>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Christian Hewitt <christianshewitt@gmail.com>
Subject: [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4
Date: Sun, 19 Jul 2020 02:45:46 +0000 [thread overview]
Message-ID: <20200719024548.8940-2-christianshewitt@gmail.com> (raw)
In-Reply-To: <20200719024548.8940-1-christianshewitt@gmail.com>
Add initial audio support limited to HDMI i2s.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
---
.../boot/dts/amlogic/meson-sm1-odroid-c4.dts | 88 +++++++++++++++++++
1 file changed, 88 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
index 00d90b30f8b4..cf5a98f0e47c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-odroid-c4.dts
@@ -8,6 +8,7 @@
#include "meson-sm1.dtsi"
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "hardkernel,odroid-c4", "amlogic,sm1";
@@ -186,6 +187,69 @@
};
};
};
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "SM1-ODROID-C4";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
};
&cpu0 {
@@ -237,6 +301,18 @@
amlogic,tx-delay-ns = <2>;
};
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
&gpio {
gpio-line-names =
/* GPIOZ */
@@ -381,6 +457,18 @@
vqmmc-supply = <&flash_1v8>;
};
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
+
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
--
2.17.1
_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic
next prev parent reply other threads:[~2020-07-19 2:46 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-19 2:45 [PATCH v2 0/3] arm64: dts: meson: add more G12/SM1 soundcards Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt [this message]
2020-07-19 2:45 ` [PATCH v2 1/3] arm64: dts: meson: add audio playback to odroid-c4 Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-19 2:45 ` [PATCH v2 2/3] arm64: dts: meson: add audio playback to khadas-vim3l Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-19 2:45 ` [PATCH v2 3/3] arm64: dts: meson: add audio playback to u200 Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-19 2:45 ` Christian Hewitt
2020-07-21 9:06 ` Jerome Brunet
2020-07-21 9:06 ` Jerome Brunet
2020-07-21 9:06 ` Jerome Brunet
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200719024548.8940-2-christianshewitt@gmail.com \
--to=christianshewitt@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.