All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Alexander A. Klimov" <grandmaster@al2klimov.de>
To: linux@roeck-us.net, jdelvare@suse.com, corbet@lwn.net,
	linux-hwmon@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: "Alexander A. Klimov" <grandmaster@al2klimov.de>
Subject: [PATCH for v5.9] hwmon: (ina2xx) Replace HTTP links with HTTPS ones
Date: Sun, 19 Jul 2020 20:15:30 +0200	[thread overview]
Message-ID: <20200719181530.60878-1-grandmaster@al2klimov.de> (raw)

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
---
 Continuing my work started at 93431e0607e5.
 See also: git log --oneline '--author=Alexander A. Klimov <grandmaster@al2klimov.de>' v5.7..master
 (Actually letting a shell for loop submit all this stuff for me.)

 If there are any URLs to be removed completely
 or at least not (just) HTTPSified:
 Just clearly say so and I'll *undo my change*.
 See also: https://lkml.org/lkml/2020/6/27/64

 If there are any valid, but yet not changed URLs:
 See: https://lkml.org/lkml/2020/6/26/837

 If you apply the patch, please let me know.

 Sorry again to all maintainers who complained about subject lines.
 Now I realized that you want an actually perfect prefixes,
 not just subsystem ones.
 I tried my best...
 And yes, *I could* (at least half-)automate it.
 Impossible is nothing! :)


 Documentation/hwmon/ina2xx.rst | 10 +++++-----
 drivers/hwmon/ina2xx.c         | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/Documentation/hwmon/ina2xx.rst b/Documentation/hwmon/ina2xx.rst
index ed81f5416331..f78a5cd44c4c 100644
--- a/Documentation/hwmon/ina2xx.rst
+++ b/Documentation/hwmon/ina2xx.rst
@@ -11,7 +11,7 @@ Supported chips:
 
     Datasheet: Publicly available at the Texas Instruments website
 
-	       http://www.ti.com/
+	       https://www.ti.com/
 
   * Texas Instruments INA220
 
@@ -21,7 +21,7 @@ Supported chips:
 
     Datasheet: Publicly available at the Texas Instruments website
 
-	       http://www.ti.com/
+	       https://www.ti.com/
 
   * Texas Instruments INA226
 
@@ -31,7 +31,7 @@ Supported chips:
 
     Datasheet: Publicly available at the Texas Instruments website
 
-	       http://www.ti.com/
+	       https://www.ti.com/
 
   * Texas Instruments INA230
 
@@ -41,7 +41,7 @@ Supported chips:
 
     Datasheet: Publicly available at the Texas Instruments website
 
-	       http://www.ti.com/
+	       https://www.ti.com/
 
   * Texas Instruments INA231
 
@@ -51,7 +51,7 @@ Supported chips:
 
     Datasheet: Publicly available at the Texas Instruments website
 
-	       http://www.ti.com/
+	       https://www.ti.com/
 
 Author: Lothar Felten <lothar.felten@gmail.com>
 
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 55d474ec7c35..0fc6d5857993 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -4,19 +4,19 @@
  *
  * INA219:
  * Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina219
+ * Datasheet: https://www.ti.com/product/ina219
  *
  * INA220:
  * Bi-Directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina220
+ * Datasheet: https://www.ti.com/product/ina220
  *
  * INA226:
  * Bi-Directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina226
+ * Datasheet: https://www.ti.com/product/ina226
  *
  * INA230:
  * Bi-directional Current/Power Monitor with I2C Interface
- * Datasheet: http://www.ti.com/product/ina230
+ * Datasheet: https://www.ti.com/product/ina230
  *
  * Copyright (C) 2012 Lothar Felten <lothar.felten@gmail.com>
  * Thanks to Jan Volkering
@@ -148,7 +148,7 @@ static const struct ina2xx_config ina2xx_config[] = {
  * Available averaging rates for ina226. The indices correspond with
  * the bit values expected by the chip (according to the ina226 datasheet,
  * table 3 AVG bit settings, found at
- * http://www.ti.com/lit/ds/symlink/ina226.pdf.
+ * https://www.ti.com/lit/ds/symlink/ina226.pdf.
  */
 static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
 
-- 
2.27.0


                 reply	other threads:[~2020-07-19 18:15 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200719181530.60878-1-grandmaster@al2klimov.de \
    --to=grandmaster@al2klimov.de \
    --cc=corbet@lwn.net \
    --cc=jdelvare@suse.com \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.