From: Jagan Teki <jagan@amarulasolutions.com> To: Kever Yang <kever.yang@rock-chips.com>, Philipp Tomsich <philipp.tomsich@theobroma-systems.com>, Simon Glass <sjg@chromium.org> Cc: Suniel Mahesh <sunil@amarulasolutions.com>, U-Boot-Denx <u-boot@lists.denx.de>, linux-rockchip@lists.infradead.org, linux-amarula <linux-amarula@amarulasolutions.com>, Jagan Teki <jagan@amarulasolutions.com> Subject: [PATCH 09/16] configs: Enable USB Gadget for rock-pi-n10 Date: Tue, 21 Jul 2020 00:21:13 +0530 [thread overview] Message-ID: <20200720185120.671064-10-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200720185120.671064-1-jagan@amarulasolutions.com> From: Suniel Mahesh <sunil@amarulasolutions.com> Enable fastboot and USB gadget related config options for rock-pi-n10 target which hosts RK3399Pro-VMARC-SOM . Note: Connect the Host USB cable (Type A) to rock-pi-n10 USB 3.0 port on carrier board for fastboot. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- configs/rock-pi-n10-rk3399pro_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig index ba2babe20f..895820fbe6 100644 --- a/configs/rock-pi-n10-rk3399pro_defconfig +++ b/configs/rock-pi-n10-rk3399pro_defconfig @@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y +# CONFIG_ANDROID_BOOT_IMAGE is not set # CONFIG_CONSOLE_MUX is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb" CONFIG_MISC_INIT_R=y @@ -55,8 +56,10 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_KEYBOARD=y # CONFIG_USB_KEYBOARD_FN_KEYS is not set +CONFIG_USB_GADGET=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [PATCH 09/16] configs: Enable USB Gadget for rock-pi-n10 Date: Tue, 21 Jul 2020 00:21:13 +0530 [thread overview] Message-ID: <20200720185120.671064-10-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200720185120.671064-1-jagan@amarulasolutions.com> From: Suniel Mahesh <sunil@amarulasolutions.com> Enable fastboot and USB gadget related config options for rock-pi-n10 target which hosts RK3399Pro-VMARC-SOM . Note: Connect the Host USB cable (Type A) to rock-pi-n10 USB 3.0 port on carrier board for fastboot. Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- configs/rock-pi-n10-rk3399pro_defconfig | 3 +++ 1 file changed, 3 insertions(+) diff --git a/configs/rock-pi-n10-rk3399pro_defconfig b/configs/rock-pi-n10-rk3399pro_defconfig index ba2babe20f..895820fbe6 100644 --- a/configs/rock-pi-n10-rk3399pro_defconfig +++ b/configs/rock-pi-n10-rk3399pro_defconfig @@ -9,6 +9,7 @@ CONFIG_NR_DRAM_BANKS=1 CONFIG_DEBUG_UART_BASE=0xFF1A0000 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_DEBUG_UART=y +# CONFIG_ANDROID_BOOT_IMAGE is not set # CONFIG_CONSOLE_MUX is not set CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb" CONFIG_MISC_INIT_R=y @@ -55,8 +56,10 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_GENERIC=y CONFIG_USB_DWC3=y CONFIG_USB_DWC3_GENERIC=y +CONFIG_ROCKCHIP_USB2_PHY=y CONFIG_USB_KEYBOARD=y # CONFIG_USB_KEYBOARD_FN_KEYS is not set +CONFIG_USB_GADGET=y CONFIG_DM_VIDEO=y CONFIG_DISPLAY=y CONFIG_VIDEO_ROCKCHIP=y -- 2.25.1
next prev parent reply other threads:[~2020-07-20 18:51 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-20 18:51 [PATCH 00/16] board: Add new features for ROCKPi N8/N10 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 01/16] ARM: dts: rockchip: Sync ROCKPi N8/N10 dts(i) from Linux Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-21 3:14 ` Kever Yang 2020-07-21 3:14 ` Kever Yang 2020-07-20 18:51 ` [PATCH 02/16] arm: dts: rockchip: Sync rk3288 dtsi from linux Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-21 3:14 ` Kever Yang 2020-07-21 3:14 ` Kever Yang 2020-07-20 18:51 ` [PATCH 03/16] ARM: dts: rockchip: Add usb host0 ohci node for rk3288 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-21 3:17 ` Kever Yang 2020-07-21 3:17 ` Kever Yang 2020-07-21 6:26 ` Jagan Teki 2020-07-21 6:26 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 04/16] ARM: dts: rockchip: Add USB for RockPI N8/N10 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 05/16] arm: dts: rockchip: Add HDMI out " Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 06/16] arm64: dts: rockchip: Add PCIe for RockPI N10 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 07/16] configs: Enable USB host on Rock-PI-N10 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-21 3:20 ` Kever Yang 2020-07-21 3:20 ` Kever Yang 2020-07-20 18:51 ` [PATCH 08/16] configs: Enable HDMI output Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` Jagan Teki [this message] 2020-07-20 18:51 ` [PATCH 09/16] configs: Enable USB Gadget for rock-pi-n10 Jagan Teki 2020-07-20 18:51 ` [PATCH 10/16] configs: Enable USB 2.0 on Rock-PI-N8 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 11/16] configs: Enable USB Gadget on rock-pi-n8 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 12/16] rk3288: rock-pi-n8: Add console settings Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 13/16] configs: Enable HDMI output for rock-pi-n8 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 14/16] rock-pi-n10: Enable PCI/NVME Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 15/16] arm64: dts: rockchip: Add u-boot, spl-boot-order for ROCKPi N10 Jagan Teki 2020-07-20 18:51 ` Jagan Teki 2020-07-20 18:51 ` [PATCH 16/16] rock-p-n8/n10: Disable RAM_ROCKCHIP_DEBUG Jagan Teki 2020-07-20 18:51 ` Jagan Teki
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200720185120.671064-10-jagan@amarulasolutions.com \ --to=jagan@amarulasolutions.com \ --cc=kever.yang@rock-chips.com \ --cc=linux-amarula@amarulasolutions.com \ --cc=linux-rockchip@lists.infradead.org \ --cc=philipp.tomsich@theobroma-systems.com \ --cc=sjg@chromium.org \ --cc=sunil@amarulasolutions.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.