From: Jagan Teki <jagan@amarulasolutions.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org> Cc: Suniel Mahesh <sunil@amarulasolutions.com>, Michael Trimarchi <michael@amarulasolutions.com>, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-amarula <linux-amarula@amarulasolutions.com>, Jagan Teki <jagan@amarulasolutions.com> Subject: [PATCH v3 4/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support Date: Thu, 23 Jul 2020 14:32:10 +0530 [thread overview] Message-ID: <20200723090210.41201-4-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200723090210.41201-1-jagan@amarulasolutions.com> Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - none Changes for v2: - update commit message - add radxa,rockpi4c arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-rock-pi-4c.dts | 51 +++++++++++++++++++ 2 files changed, 52 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 8832d05c2571..02cdb3c4a6c1 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts new file mode 100644 index 000000000000..4c7ebb1c5d2d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4C"; + compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399"; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + +&vcc5v0_host { + gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; +}; + +&vcc5v0_host_en { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; +}; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-rockchip@lists.infradead.org, Jagan Teki <jagan@amarulasolutions.com>, Suniel Mahesh <sunil@amarulasolutions.com>, Michael Trimarchi <michael@amarulasolutions.com>, linux-amarula <linux-amarula@amarulasolutions.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 4/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support Date: Thu, 23 Jul 2020 14:32:10 +0530 [thread overview] Message-ID: <20200723090210.41201-4-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200723090210.41201-1-jagan@amarulasolutions.com> Rock PI 4C has AP6256 Wifi/BT, PoE, miniDP, USB Host enabled GPIO pin change compared to 4B, 4C. So, add or enable difference nodes/properties in 4C dts by including common dtsi. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v3: - none Changes for v2: - update commit message - add radxa,rockpi4c arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-rock-pi-4c.dts | 51 +++++++++++++++++++ 2 files changed, 52 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 8832d05c2571..02cdb3c4a6c1 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -35,6 +35,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts new file mode 100644 index 000000000000..4c7ebb1c5d2d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c.dts @@ -0,0 +1,51 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2019 Radxa Limited + * Copyright (c) 2019 Amarula Solutions(India) + */ + +/dts-v1/; +#include "rk3399-rock-pi-4.dtsi" + +/ { + model = "Radxa ROCK Pi 4C"; + compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399"; +}; + +&sdio0 { + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&uart0 { + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + +&vcc5v0_host { + gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>; +}; + +&vcc5v0_host_en { + rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>; +}; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-23 9:02 UTC|newest] Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-23 9:02 [PATCH v3 1/4] dt-bindings: arm: rockchip: Update ROCKPi 4 binding Jagan Teki 2020-07-23 9:02 ` Jagan Teki 2020-07-23 9:02 ` Jagan Teki 2020-07-23 9:02 ` [PATCH v3 2/4] arm64: dts: rockchip: Mark rock-pi-4 as rock-pi-4a dts Jagan Teki 2020-07-23 9:02 ` Jagan Teki 2020-07-23 9:02 ` [PATCH v3 3/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4B support Jagan Teki 2020-07-23 9:02 ` Jagan Teki 2020-07-23 9:02 ` Jagan Teki 2020-07-23 9:02 ` Jagan Teki [this message] 2020-07-23 9:02 ` [PATCH v3 4/4] arm64: dts: rockchip: Add Radxa ROCK Pi 4C support Jagan Teki 2020-07-23 15:50 ` [PATCH v3 1/4] dt-bindings: arm: rockchip: Update ROCKPi 4 binding Rob Herring 2020-07-23 15:50 ` Rob Herring 2020-07-23 15:50 ` Rob Herring 2020-07-29 11:59 ` Jagan Teki 2020-07-29 11:59 ` Jagan Teki 2020-07-29 11:59 ` Jagan Teki 2020-07-23 15:51 ` Rob Herring 2020-07-23 15:51 ` Rob Herring 2020-07-23 15:51 ` Rob Herring
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200723090210.41201-4-jagan@amarulasolutions.com \ --to=jagan@amarulasolutions.com \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=linux-amarula@amarulasolutions.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=michael@amarulasolutions.com \ --cc=robh+dt@kernel.org \ --cc=sunil@amarulasolutions.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.