All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lars Povlsen <lars.povlsen@microchip.com>
To: SoC Team <soc@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Stephen Boyd <sboyd@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: Lars Povlsen <lars.povlsen@microchip.com>,
	Steen Hegelund <Steen.Hegelund@microchip.com>,
	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
	Olof Johansson <olof@lixom.net>,
	"Michael Turquette" <mturquette@baylibre.com>,
	<devicetree@vger.kernel.org>, <linux-clk@vger.kernel.org>,
	<linux-gpio@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>
Subject: [PATCH v4 08/10] clk: sparx5: Add Sparx5 SoC DPLL clock driver
Date: Mon, 27 Jul 2020 10:42:09 +0200	[thread overview]
Message-ID: <20200727084211.6632-9-lars.povlsen@microchip.com> (raw)
In-Reply-To: <20200727084211.6632-1-lars.povlsen@microchip.com>

This adds a device driver for the Sparx5 SoC DPLL clock

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-sparx5.c | 295 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 296 insertions(+)
 create mode 100644 drivers/clk/clk-sparx5.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ca9af11d33913..da8fcf147eb13 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
+obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
diff --git a/drivers/clk/clk-sparx5.c b/drivers/clk/clk-sparx5.c
new file mode 100644
index 0000000000000..0fad0c1a01862
--- /dev/null
+++ b/drivers/clk/clk-sparx5.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Microchip Sparx5 SoC Clock driver.
+ *
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
+
+#define PLL_DIV		GENMASK(7, 0)
+#define PLL_PRE_DIV	GENMASK(10, 8)
+#define PLL_ROT_DIR	BIT(11)
+#define PLL_ROT_SEL	GENMASK(13, 12)
+#define PLL_ROT_ENA	BIT(14)
+#define PLL_CLK_ENA	BIT(15)
+
+#define MAX_SEL 4
+#define MAX_PRE BIT(3)
+
+static const u8 sel_rates[MAX_SEL] = { 0, 2*8, 2*4, 2*2 };
+
+static const char *clk_names[N_CLOCKS] = {
+	"core", "ddr", "cpu2", "arm2",
+	"aux1", "aux2", "aux3", "aux4",
+	"synce",
+};
+
+struct s5_hw_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+struct s5_clk_data {
+	void __iomem *base;
+	struct s5_hw_clk s5_hw[N_CLOCKS];
+};
+
+struct s5_pll_conf {
+	unsigned long freq;
+	u8 div;
+	bool rot_ena;
+	u8 rot_sel;
+	u8 rot_dir;
+	u8 pre_div;
+};
+
+#define to_s5_pll(hw) container_of(hw, struct s5_hw_clk, hw)
+
+static unsigned long s5_calc_freq(unsigned long parent_rate,
+				  const struct s5_pll_conf *conf)
+{
+	unsigned long rate = parent_rate / conf->div;
+
+	if (conf->rot_ena) {
+		int sign = conf->rot_dir ? -1 : 1;
+		int divt = sel_rates[conf->rot_sel] * (1 + conf->pre_div);
+		int divb = divt + sign;
+
+		rate = mult_frac(rate, divt, divb);
+		rate = roundup(rate, 1000);
+	}
+
+	return rate;
+}
+
+static void s5_search_fractional(unsigned long rate,
+				 unsigned long parent_rate,
+				 int div,
+				 struct s5_pll_conf *conf)
+{
+	struct s5_pll_conf best;
+	ulong cur_offset, best_offset = rate;
+	int d, i, j;
+
+	memset(conf, 0, sizeof(*conf));
+	conf->div = div;
+	conf->rot_ena = 1;	/* Fractional rate */
+
+	for (d = 0; best_offset > 0 && d <= 1 ; d++) {
+		conf->rot_dir = !!d;
+		for (i = 0; best_offset > 0 && i < MAX_PRE; i++) {
+			conf->pre_div = i;
+			for (j = 1; best_offset > 0 && j < MAX_SEL; j++) {
+				conf->rot_sel = j;
+				conf->freq = s5_calc_freq(parent_rate, conf);
+				cur_offset = abs(rate - conf->freq);
+				if (cur_offset < best_offset) {
+					best_offset = cur_offset;
+					best = *conf;
+				}
+			}
+		}
+	}
+
+	/* Best match */
+	*conf = best;
+}
+
+static unsigned long s5_calc_params(unsigned long rate,
+				    unsigned long parent_rate,
+				    struct s5_pll_conf *conf)
+{
+	if (parent_rate % rate) {
+		struct s5_pll_conf alt1, alt2;
+		int div;
+
+		div = DIV_ROUND_CLOSEST_ULL(parent_rate, rate);
+		s5_search_fractional(rate, parent_rate, div, &alt1);
+
+		/* Straight match? */
+		if (alt1.freq == rate) {
+			*conf = alt1;
+		} else {
+			/* Try without rounding divider */
+			div = parent_rate / rate;
+			if (div != alt1.div) {
+				s5_search_fractional(rate, parent_rate, div,
+						     &alt2);
+				/* Select the better match */
+				if (abs(rate - alt1.freq) <
+				    abs(rate - alt2.freq))
+					*conf = alt1;
+				else
+					*conf = alt2;
+			}
+		}
+	} else {
+		/* Straight fit */
+		memset(conf, 0, sizeof(*conf));
+		conf->div = parent_rate / rate;
+	}
+
+	return conf->freq;
+}
+
+static int s5_pll_enable(struct clk_hw *hw)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	u32 val = readl(pll->reg);
+
+	val |= PLL_CLK_ENA;
+	writel(val, pll->reg);
+
+	return 0;
+}
+
+static void s5_pll_disable(struct clk_hw *hw)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	u32 val = readl(pll->reg);
+
+	val &= ~PLL_CLK_ENA;
+	writel(val, pll->reg);
+}
+
+static int s5_pll_set_rate(struct clk_hw *hw,
+			   unsigned long rate,
+			   unsigned long parent_rate)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	struct s5_pll_conf conf;
+	unsigned long eff_rate;
+	u32 val;
+
+	eff_rate = s5_calc_params(rate, parent_rate, &conf);
+	if (eff_rate != rate)
+		return -EOPNOTSUPP;
+
+	val = readl(pll->reg) & PLL_CLK_ENA;
+	val |= FIELD_PREP(PLL_DIV, conf.div);
+	if (conf.rot_ena) {
+		val |= PLL_ROT_ENA;
+		val |= FIELD_PREP(PLL_ROT_SEL, conf.rot_sel);
+		val |= FIELD_PREP(PLL_PRE_DIV, conf.pre_div);
+		if (conf.rot_dir)
+			val |= PLL_ROT_DIR;
+	}
+	writel(val, pll->reg);
+
+	return 0;
+}
+
+static unsigned long s5_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	struct s5_pll_conf conf;
+	u32 val;
+
+	val = readl(pll->reg);
+
+	if (val & PLL_CLK_ENA) {
+		conf.div     = FIELD_GET(PLL_DIV, val);
+		conf.pre_div = FIELD_GET(PLL_PRE_DIV, val);
+		conf.rot_ena = FIELD_GET(PLL_ROT_ENA, val);
+		conf.rot_dir = FIELD_GET(PLL_ROT_DIR, val);
+		conf.rot_sel = FIELD_GET(PLL_ROT_SEL, val);
+
+		conf.freq = s5_calc_freq(parent_rate, &conf);
+	} else {
+		conf.freq = 0;
+	}
+
+	return conf.freq;
+}
+
+static long s5_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *parent_rate)
+{
+	struct s5_pll_conf conf;
+
+	return s5_calc_params(rate, *parent_rate, &conf);
+}
+
+static const struct clk_ops s5_pll_ops = {
+	.enable		= s5_pll_enable,
+	.disable	= s5_pll_disable,
+	.set_rate	= s5_pll_set_rate,
+	.round_rate	= s5_pll_round_rate,
+	.recalc_rate	= s5_pll_recalc_rate,
+};
+
+static struct clk_hw *s5_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct s5_clk_data *s5_clk = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= N_CLOCKS) {
+		pr_err("%s: invalid index %u\n", __func__, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return &s5_clk->s5_hw[idx].hw;
+}
+
+static int s5_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int i, ret;
+	struct s5_clk_data *s5_clk;
+	struct clk_parent_data pdata = { .index = 0 };
+	struct clk_init_data init = {
+		.ops = &s5_pll_ops,
+		.num_parents = 1,
+		.parent_data = &pdata,
+	};
+
+	s5_clk = devm_kzalloc(dev, sizeof(*s5_clk), GFP_KERNEL);
+	if (!s5_clk)
+		return -ENOMEM;
+
+	s5_clk->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(s5_clk->base))
+		return PTR_ERR(s5_clk->base);
+
+	for (i = 0; i < N_CLOCKS; i++) {
+		struct s5_hw_clk *s5_hw = &s5_clk->s5_hw[i];
+
+		init.name = clk_names[i];
+		s5_hw->reg = s5_clk->base + (i * 4);
+		s5_hw->hw.init = &init;
+		ret = devm_clk_hw_register(dev, &s5_hw->hw);
+		if (ret) {
+			dev_err(dev, "failed to register %s clock\n",
+				init.name);
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, s5_clk_hw_get, s5_clk);
+}
+
+static const struct of_device_id s5_clk_dt_ids[] = {
+	{ .compatible = "microchip,sparx5-dpll", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s5_clk_dt_ids);
+
+static struct platform_driver s5_clk_driver = {
+	.probe  = s5_clk_probe,
+	.driver = {
+		.name = "sparx5-clk",
+		.of_match_table = s5_clk_dt_ids,
+	},
+};
+builtin_platform_driver(s5_clk_driver);
-- 
2.27.0


WARNING: multiple messages have this Message-ID (diff)
From: Lars Povlsen <lars.povlsen@microchip.com>
To: SoC Team <soc@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
	Stephen Boyd <sboyd@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>
Cc: devicetree@vger.kernel.org,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Steen Hegelund <Steen.Hegelund@microchip.com>,
	linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org,
	Microchip Linux Driver Support <UNGLinuxDriver@microchip.com>,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	Olof Johansson <olof@lixom.net>,
	Michael Turquette <mturquette@baylibre.com>,
	Lars Povlsen <lars.povlsen@microchip.com>
Subject: [PATCH v4 08/10] clk: sparx5: Add Sparx5 SoC DPLL clock driver
Date: Mon, 27 Jul 2020 10:42:09 +0200	[thread overview]
Message-ID: <20200727084211.6632-9-lars.povlsen@microchip.com> (raw)
In-Reply-To: <20200727084211.6632-1-lars.povlsen@microchip.com>

This adds a device driver for the Sparx5 SoC DPLL clock

Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
 drivers/clk/Makefile     |   1 +
 drivers/clk/clk-sparx5.c | 295 +++++++++++++++++++++++++++++++++++++++
 2 files changed, 296 insertions(+)
 create mode 100644 drivers/clk/clk-sparx5.c

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index ca9af11d33913..da8fcf147eb13 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_COMMON_CLK_CDCE925)	+= clk-cdce925.o
 obj-$(CONFIG_ARCH_CLPS711X)		+= clk-clps711x.o
 obj-$(CONFIG_COMMON_CLK_CS2000_CP)	+= clk-cs2000-cp.o
 obj-$(CONFIG_ARCH_EFM32)		+= clk-efm32gg.o
+obj-$(CONFIG_ARCH_SPARX5)		+= clk-sparx5.o
 obj-$(CONFIG_COMMON_CLK_FIXED_MMIO)	+= clk-fixed-mmio.o
 obj-$(CONFIG_COMMON_CLK_FSL_SAI)	+= clk-fsl-sai.o
 obj-$(CONFIG_COMMON_CLK_GEMINI)		+= clk-gemini.o
diff --git a/drivers/clk/clk-sparx5.c b/drivers/clk/clk-sparx5.c
new file mode 100644
index 0000000000000..0fad0c1a01862
--- /dev/null
+++ b/drivers/clk/clk-sparx5.c
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Microchip Sparx5 SoC Clock driver.
+ *
+ * Copyright (c) 2019 Microchip Inc.
+ *
+ * Author: Lars Povlsen <lars.povlsen@microchip.com>
+ */
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clk-provider.h>
+#include <linux/bitfield.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/clock/microchip,sparx5.h>
+
+#define PLL_DIV		GENMASK(7, 0)
+#define PLL_PRE_DIV	GENMASK(10, 8)
+#define PLL_ROT_DIR	BIT(11)
+#define PLL_ROT_SEL	GENMASK(13, 12)
+#define PLL_ROT_ENA	BIT(14)
+#define PLL_CLK_ENA	BIT(15)
+
+#define MAX_SEL 4
+#define MAX_PRE BIT(3)
+
+static const u8 sel_rates[MAX_SEL] = { 0, 2*8, 2*4, 2*2 };
+
+static const char *clk_names[N_CLOCKS] = {
+	"core", "ddr", "cpu2", "arm2",
+	"aux1", "aux2", "aux3", "aux4",
+	"synce",
+};
+
+struct s5_hw_clk {
+	struct clk_hw hw;
+	void __iomem *reg;
+};
+
+struct s5_clk_data {
+	void __iomem *base;
+	struct s5_hw_clk s5_hw[N_CLOCKS];
+};
+
+struct s5_pll_conf {
+	unsigned long freq;
+	u8 div;
+	bool rot_ena;
+	u8 rot_sel;
+	u8 rot_dir;
+	u8 pre_div;
+};
+
+#define to_s5_pll(hw) container_of(hw, struct s5_hw_clk, hw)
+
+static unsigned long s5_calc_freq(unsigned long parent_rate,
+				  const struct s5_pll_conf *conf)
+{
+	unsigned long rate = parent_rate / conf->div;
+
+	if (conf->rot_ena) {
+		int sign = conf->rot_dir ? -1 : 1;
+		int divt = sel_rates[conf->rot_sel] * (1 + conf->pre_div);
+		int divb = divt + sign;
+
+		rate = mult_frac(rate, divt, divb);
+		rate = roundup(rate, 1000);
+	}
+
+	return rate;
+}
+
+static void s5_search_fractional(unsigned long rate,
+				 unsigned long parent_rate,
+				 int div,
+				 struct s5_pll_conf *conf)
+{
+	struct s5_pll_conf best;
+	ulong cur_offset, best_offset = rate;
+	int d, i, j;
+
+	memset(conf, 0, sizeof(*conf));
+	conf->div = div;
+	conf->rot_ena = 1;	/* Fractional rate */
+
+	for (d = 0; best_offset > 0 && d <= 1 ; d++) {
+		conf->rot_dir = !!d;
+		for (i = 0; best_offset > 0 && i < MAX_PRE; i++) {
+			conf->pre_div = i;
+			for (j = 1; best_offset > 0 && j < MAX_SEL; j++) {
+				conf->rot_sel = j;
+				conf->freq = s5_calc_freq(parent_rate, conf);
+				cur_offset = abs(rate - conf->freq);
+				if (cur_offset < best_offset) {
+					best_offset = cur_offset;
+					best = *conf;
+				}
+			}
+		}
+	}
+
+	/* Best match */
+	*conf = best;
+}
+
+static unsigned long s5_calc_params(unsigned long rate,
+				    unsigned long parent_rate,
+				    struct s5_pll_conf *conf)
+{
+	if (parent_rate % rate) {
+		struct s5_pll_conf alt1, alt2;
+		int div;
+
+		div = DIV_ROUND_CLOSEST_ULL(parent_rate, rate);
+		s5_search_fractional(rate, parent_rate, div, &alt1);
+
+		/* Straight match? */
+		if (alt1.freq == rate) {
+			*conf = alt1;
+		} else {
+			/* Try without rounding divider */
+			div = parent_rate / rate;
+			if (div != alt1.div) {
+				s5_search_fractional(rate, parent_rate, div,
+						     &alt2);
+				/* Select the better match */
+				if (abs(rate - alt1.freq) <
+				    abs(rate - alt2.freq))
+					*conf = alt1;
+				else
+					*conf = alt2;
+			}
+		}
+	} else {
+		/* Straight fit */
+		memset(conf, 0, sizeof(*conf));
+		conf->div = parent_rate / rate;
+	}
+
+	return conf->freq;
+}
+
+static int s5_pll_enable(struct clk_hw *hw)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	u32 val = readl(pll->reg);
+
+	val |= PLL_CLK_ENA;
+	writel(val, pll->reg);
+
+	return 0;
+}
+
+static void s5_pll_disable(struct clk_hw *hw)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	u32 val = readl(pll->reg);
+
+	val &= ~PLL_CLK_ENA;
+	writel(val, pll->reg);
+}
+
+static int s5_pll_set_rate(struct clk_hw *hw,
+			   unsigned long rate,
+			   unsigned long parent_rate)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	struct s5_pll_conf conf;
+	unsigned long eff_rate;
+	u32 val;
+
+	eff_rate = s5_calc_params(rate, parent_rate, &conf);
+	if (eff_rate != rate)
+		return -EOPNOTSUPP;
+
+	val = readl(pll->reg) & PLL_CLK_ENA;
+	val |= FIELD_PREP(PLL_DIV, conf.div);
+	if (conf.rot_ena) {
+		val |= PLL_ROT_ENA;
+		val |= FIELD_PREP(PLL_ROT_SEL, conf.rot_sel);
+		val |= FIELD_PREP(PLL_PRE_DIV, conf.pre_div);
+		if (conf.rot_dir)
+			val |= PLL_ROT_DIR;
+	}
+	writel(val, pll->reg);
+
+	return 0;
+}
+
+static unsigned long s5_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct s5_hw_clk *pll = to_s5_pll(hw);
+	struct s5_pll_conf conf;
+	u32 val;
+
+	val = readl(pll->reg);
+
+	if (val & PLL_CLK_ENA) {
+		conf.div     = FIELD_GET(PLL_DIV, val);
+		conf.pre_div = FIELD_GET(PLL_PRE_DIV, val);
+		conf.rot_ena = FIELD_GET(PLL_ROT_ENA, val);
+		conf.rot_dir = FIELD_GET(PLL_ROT_DIR, val);
+		conf.rot_sel = FIELD_GET(PLL_ROT_SEL, val);
+
+		conf.freq = s5_calc_freq(parent_rate, &conf);
+	} else {
+		conf.freq = 0;
+	}
+
+	return conf.freq;
+}
+
+static long s5_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *parent_rate)
+{
+	struct s5_pll_conf conf;
+
+	return s5_calc_params(rate, *parent_rate, &conf);
+}
+
+static const struct clk_ops s5_pll_ops = {
+	.enable		= s5_pll_enable,
+	.disable	= s5_pll_disable,
+	.set_rate	= s5_pll_set_rate,
+	.round_rate	= s5_pll_round_rate,
+	.recalc_rate	= s5_pll_recalc_rate,
+};
+
+static struct clk_hw *s5_clk_hw_get(struct of_phandle_args *clkspec, void *data)
+{
+	struct s5_clk_data *s5_clk = data;
+	unsigned int idx = clkspec->args[0];
+
+	if (idx >= N_CLOCKS) {
+		pr_err("%s: invalid index %u\n", __func__, idx);
+		return ERR_PTR(-EINVAL);
+	}
+
+	return &s5_clk->s5_hw[idx].hw;
+}
+
+static int s5_clk_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	int i, ret;
+	struct s5_clk_data *s5_clk;
+	struct clk_parent_data pdata = { .index = 0 };
+	struct clk_init_data init = {
+		.ops = &s5_pll_ops,
+		.num_parents = 1,
+		.parent_data = &pdata,
+	};
+
+	s5_clk = devm_kzalloc(dev, sizeof(*s5_clk), GFP_KERNEL);
+	if (!s5_clk)
+		return -ENOMEM;
+
+	s5_clk->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(s5_clk->base))
+		return PTR_ERR(s5_clk->base);
+
+	for (i = 0; i < N_CLOCKS; i++) {
+		struct s5_hw_clk *s5_hw = &s5_clk->s5_hw[i];
+
+		init.name = clk_names[i];
+		s5_hw->reg = s5_clk->base + (i * 4);
+		s5_hw->hw.init = &init;
+		ret = devm_clk_hw_register(dev, &s5_hw->hw);
+		if (ret) {
+			dev_err(dev, "failed to register %s clock\n",
+				init.name);
+			return ret;
+		}
+	}
+
+	return devm_of_clk_add_hw_provider(dev, s5_clk_hw_get, s5_clk);
+}
+
+static const struct of_device_id s5_clk_dt_ids[] = {
+	{ .compatible = "microchip,sparx5-dpll", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, s5_clk_dt_ids);
+
+static struct platform_driver s5_clk_driver = {
+	.probe  = s5_clk_probe,
+	.driver = {
+		.name = "sparx5-clk",
+		.of_match_table = s5_clk_dt_ids,
+	},
+};
+builtin_platform_driver(s5_clk_driver);
-- 
2.27.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-07-27  8:43 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-27  8:42 [PATCH v4 00/10] Adding support for Microchip Sparx5 SoC Lars Povlsen
2020-07-27  8:42 ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 01/10] dt-bindings: arm: sparx5: Add documentation " Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 02/10] arm64: sparx5: Add support for Microchip 2xA53 SoC Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 03/10] arm64: dts: sparx5: Add basic cpu support Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 04/10] arm64: dts: sparx5: Add pinctrl support Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 05/10] pinctrl: ocelot: Add Sparx5 SoC support Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 06/10] dt-bindings: clock: sparx5: Add Sparx5 SoC DPLL clock Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 07/10] dt-bindings: clock: sparx5: Add bindings include file Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-29  1:18   ` Stephen Boyd
2020-07-27  8:42 ` Lars Povlsen [this message]
2020-07-27  8:42   ` [PATCH v4 08/10] clk: sparx5: Add Sparx5 SoC DPLL clock driver Lars Povlsen
2020-07-29  1:18   ` Stephen Boyd
2020-07-27  8:42 ` [PATCH v4 09/10] arm64: dts: sparx5: Add Sparx5 SoC DPLL clock Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  8:42 ` [PATCH v4 10/10] arm64: dts: sparx5: Add i2c devices, i2c muxes Lars Povlsen
2020-07-27  8:42   ` Lars Povlsen
2020-07-27  9:50 ` [PATCH v4 00/10] Adding support for Microchip Sparx5 SoC Alexandre Belloni
2020-07-27  9:50   ` Alexandre Belloni
2020-07-27 10:29   ` Lars Povlsen
2020-07-27 10:29     ` Lars Povlsen
2020-07-27 11:07     ` Arnd Bergmann
2020-07-27 11:07       ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200727084211.6632-9-lars.povlsen@microchip.com \
    --to=lars.povlsen@microchip.com \
    --cc=Steen.Hegelund@microchip.com \
    --cc=UNGLinuxDriver@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=arnd@arndb.de \
    --cc=devicetree@vger.kernel.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=olof@lixom.net \
    --cc=sboyd@kernel.org \
    --cc=soc@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.