From: Daniel Campello <campello@chromium.org>
To: LKML <devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>
Cc: Jonathan Cameron <jic23@kernel.org>,
Daniel Campello <campello@chromium.org>,
Douglas Anderson <dianders@chromium.org>,
Enrico Granata <egranata@chromium.org>,
Gwendal Grignou <gwendal@chromium.org>,
Hartmut Knaack <knaack.h@gmx.de>,
Lars-Peter Clausen <lars@metafoo.de>,
Peter Meerwald-Stadler <pmeerw@pmeerw.net>,
Stephen Boyd <swboyd@chromium.org>,
linux-iio@vger.kernel.org
Subject: [PATCH 02/15] iio: sx9310: Update macros declarations
Date: Tue, 28 Jul 2020 09:12:45 -0600 [thread overview]
Message-ID: <20200728091057.2.Idb6af9292f18f54be0b62cede52b481063738707@changeid> (raw)
In-Reply-To: <20200728151258.1222876-1-campello@chromium.org>
Follows spec sheet for macro declarations.
Signed-off-by: Daniel Campello <campello@chromium.org>
---
drivers/iio/proximity/sx9310.c | 143 +++++++++++++++------------------
1 file changed, 67 insertions(+), 76 deletions(-)
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
index d161f3061e353d..07895d4b935d12 100644
--- a/drivers/iio/proximity/sx9310.c
+++ b/drivers/iio/proximity/sx9310.c
@@ -33,45 +33,45 @@
#define SX9310_REG_IRQ_SRC 0x00
#define SX9310_REG_STAT0 0x01
#define SX9310_REG_STAT1 0x02
+#define SX9310_REG_STAT1_COMPSTAT_MASK GENMASK(3, 0)
#define SX9310_REG_IRQ_MSK 0x03
#define SX9310_CONVDONE_IRQ BIT(3)
#define SX9310_FAR_IRQ BIT(5)
#define SX9310_CLOSE_IRQ BIT(6)
-#define SX9310_EVENT_IRQ (SX9310_FAR_IRQ | \
- SX9310_CLOSE_IRQ)
#define SX9310_REG_IRQ_FUNC 0x04
#define SX9310_REG_PROX_CTRL0 0x10
-#define SX9310_REG_PROX_CTRL0_PROXSTAT2 0x10
-#define SX9310_REG_PROX_CTRL0_EN_MASK 0x0F
+#define SX9310_REG_PROX_CTRL0_SENSOREN_MASK GENMASK(3, 0)
+#define SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK GENMASK(7, 4)
+#define SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT 4
+#define SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS 0x01
#define SX9310_REG_PROX_CTRL1 0x11
#define SX9310_REG_PROX_CTRL2 0x12
-#define SX9310_REG_PROX_CTRL2_COMBMODE_ALL 0x80
-#define SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC 0x04
+#define SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 (0x02 << 6)
+#define SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC (0x01 << 2)
#define SX9310_REG_PROX_CTRL3 0x13
-#define SX9310_REG_PROX_CTRL3_GAIN0_X8 0x0c
+#define SX9310_REG_PROX_CTRL3_GAIN0_X8 (0x03 << 2)
#define SX9310_REG_PROX_CTRL3_GAIN12_X4 0x02
#define SX9310_REG_PROX_CTRL4 0x14
#define SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST 0x07
#define SX9310_REG_PROX_CTRL5 0x15
-#define SX9310_REG_PROX_CTRL5_RANGE_SMALL 0xc0
-#define SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 0x04
+#define SX9310_REG_PROX_CTRL5_RANGE_SMALL (0x03 << 6)
+#define SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 (0x01 << 2)
#define SX9310_REG_PROX_CTRL5_RAWFILT_1P25 0x02
#define SX9310_REG_PROX_CTRL6 0x16
-#define SX9310_REG_PROX_CTRL6_COMP_COMMON 0x20
+#define SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT 0x20
#define SX9310_REG_PROX_CTRL7 0x17
-#define SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 0x08
+#define SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 (0x01 << 3)
#define SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 0x05
#define SX9310_REG_PROX_CTRL8 0x18
#define SX9310_REG_PROX_CTRL9 0x19
-#define SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 0x40
-#define SX9310_REG_PROX_CTRL8_9_PTHRESH_96 0x88
+#define SX9310_REG_PROX_CTRL8_9_PTHRESH_28 (0x08 << 3)
+#define SX9310_REG_PROX_CTRL8_9_PTHRESH_96 (0x11 << 3)
#define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 0x03
#define SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 0x05
#define SX9310_REG_PROX_CTRL10 0x1a
-#define SX9310_REG_PROX_CTRL10_HYST_6PCT 0x10
-#define SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 0x12
-#define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8 0x03
+#define SX9310_REG_PROX_CTRL10_HYST_6PCT (0x01 << 4)
+#define SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 0x01
#define SX9310_REG_PROX_CTRL11 0x1b
#define SX9310_REG_PROX_CTRL12 0x1c
#define SX9310_REG_PROX_CTRL13 0x1d
@@ -82,8 +82,8 @@
#define SX9310_REG_PROX_CTRL18 0x22
#define SX9310_REG_PROX_CTRL19 0x23
#define SX9310_REG_SAR_CTRL0 0x2a
-#define SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES 0x40
-#define SX9310_REG_SAR_CTRL0_SARHYST_8 0x10
+#define SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES (0x02 << 5)
+#define SX9310_REG_SAR_CTRL0_SARHYST_8 (0x02 << 3)
#define SX9310_REG_SAR_CTRL1 0x2b
/* Each increment of the slope register is 0.0078125. */
#define SX9310_REG_SAR_CTRL1_SLOPE(_hnslope) (_hnslope / 78125)
@@ -107,7 +107,7 @@
#define SX9310_REG_SAR_MSB 0x39
#define SX9310_REG_SAR_LSB 0x3a
-#define SX9310_REG_I2CADDR 0x40
+#define SX9310_REG_I2C_ADDR 0x40
#define SX9310_REG_PAUSE 0x41
#define SX9310_REG_WHOAMI 0x42
#define SX9310_WHOAMI_VALUE 0x01
@@ -116,14 +116,9 @@
#define SX9310_REG_RESET 0x7f
#define SX9310_SOFT_RESET 0xde
-#define SX9310_SCAN_PERIOD_MASK GENMASK(7, 4)
-#define SX9310_SCAN_PERIOD_SHIFT 4
-
-#define SX9310_COMPSTAT_MASK GENMASK(3, 0)
/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
#define SX9310_NUM_CHANNELS 4
-#define SX9310_CHAN_ENABLED_MASK GENMASK(3, 0)
struct sx9310_data {
/* Serialize access to registers and channel configuration */
@@ -251,7 +246,7 @@ static const struct regmap_range sx9310_readable_reg_ranges[] = {
regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
- regmap_reg_range(SX9310_REG_I2CADDR, SX9310_REG_WHOAMI),
+ regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI),
regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
};
@@ -292,7 +287,7 @@ static int sx9310_update_chan_en(struct sx9310_data *data,
if ((data->chan_read | data->chan_event) != (chan_read | chan_event)) {
ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
- SX9310_CHAN_ENABLED_MASK,
+ SX9310_REG_PROX_CTRL0_SENSOREN_MASK,
chan_read | chan_event);
if (ret)
return ret;
@@ -361,7 +356,8 @@ static int sx9310_wait_for_sample(struct sx9310_data *data)
if (ret < 0)
return ret;
- val = (val & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+ val = (val & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+ SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
msleep(sx9310_scan_period_table[val]);
@@ -435,7 +431,8 @@ static int sx9310_read_samp_freq(struct sx9310_data *data, int *val, int *val2)
if (ret < 0)
return ret;
- regval = (regval & SX9310_SCAN_PERIOD_MASK) >> SX9310_SCAN_PERIOD_SHIFT;
+ regval = (regval & SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK) >>
+ SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT;
*val = sx9310_samp_freq_table[regval].val;
*val2 = sx9310_samp_freq_table[regval].val2;
@@ -483,8 +480,8 @@ static int sx9310_set_samp_freq(struct sx9310_data *data, int val, int val2)
mutex_lock(&data->mutex);
ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL0,
- SX9310_SCAN_PERIOD_MASK,
- i << SX9310_SCAN_PERIOD_SHIFT);
+ SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK,
+ i << SX9310_REG_PROX_CTRL0_SCANPERIOD_SHIFT);
mutex_unlock(&data->mutex);
@@ -572,7 +569,7 @@ static irqreturn_t sx9310_irq_thread_handler(int irq, void *private)
goto out;
}
- if (val & SX9310_EVENT_IRQ)
+ if (val & (SX9310_FAR_IRQ | SX9310_CLOSE_IRQ))
sx9310_push_events(indio_dev);
if (val & SX9310_CONVDONE_IRQ)
@@ -600,6 +597,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
enum iio_event_direction dir, int state)
{
struct sx9310_data *data = iio_priv(indio_dev);
+ unsigned int eventirq = SX9310_FAR_IRQ | SX9310_CLOSE_IRQ;
int ret;
/* If the state hasn't changed, there's nothing to do. */
@@ -612,7 +610,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
if (ret < 0)
goto out_unlock;
if (!(data->chan_event & ~BIT(chan->channel))) {
- ret = sx9310_enable_irq(data, SX9310_EVENT_IRQ);
+ ret = sx9310_enable_irq(data, eventirq);
if (ret < 0)
sx9310_put_event_channel(data, chan->channel);
}
@@ -621,7 +619,7 @@ static int sx9310_write_event_config(struct iio_dev *indio_dev,
if (ret < 0)
goto out_unlock;
if (!data->chan_event) {
- ret = sx9310_disable_irq(data, SX9310_EVENT_IRQ);
+ ret = sx9310_disable_irq(data, eventirq);
if (ret < 0)
sx9310_get_event_channel(data, chan->channel);
}
@@ -746,53 +744,46 @@ struct sx9310_reg_default {
u8 def;
};
-#define SX_INIT(_reg, _def) \
- { \
- .reg = SX9310_REG_##_reg, \
- .def = _def, \
- }
-
static const struct sx9310_reg_default sx9310_default_regs[] = {
- SX_INIT(IRQ_MSK, 0x00),
- SX_INIT(IRQ_FUNC, 0x00),
+ { SX9310_REG_IRQ_MSK, 0x00 },
+ { SX9310_REG_IRQ_FUNC, 0x00 },
/*
* The lower 4 bits should not be set as it enable sensors measurements.
* Turning the detection on before the configuration values are set to
* good values can cause the device to return erroneous readings.
*/
- SX_INIT(PROX_CTRL0, SX9310_REG_PROX_CTRL0_PROXSTAT2),
- SX_INIT(PROX_CTRL1, 0x00),
- SX_INIT(PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_ALL |
- SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC),
- SX_INIT(PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
- SX9310_REG_PROX_CTRL3_GAIN12_X4),
- SX_INIT(PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST),
- SX_INIT(PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
- SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
- SX9310_REG_PROX_CTRL5_RAWFILT_1P25),
- SX_INIT(PROX_CTRL6, SX9310_REG_PROX_CTRL6_COMP_COMMON),
- SX_INIT(PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
- SX9310_REG_PROX_CTRL7_AVGPOSFILT_512),
- SX_INIT(PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
- SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500),
- SX_INIT(PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH12_28 |
- SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900),
- SX_INIT(PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
- SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_8 |
- SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_8),
- SX_INIT(PROX_CTRL11, 0x00),
- SX_INIT(PROX_CTRL12, 0x00),
- SX_INIT(PROX_CTRL13, 0x00),
- SX_INIT(PROX_CTRL14, 0x00),
- SX_INIT(PROX_CTRL15, 0x00),
- SX_INIT(PROX_CTRL16, 0x00),
- SX_INIT(PROX_CTRL17, 0x00),
- SX_INIT(PROX_CTRL18, 0x00),
- SX_INIT(PROX_CTRL19, 0x00),
- SX_INIT(SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
- SX9310_REG_SAR_CTRL0_SARHYST_8),
- SX_INIT(SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250)),
- SX_INIT(SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT),
+ { SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS },
+ { SX9310_REG_PROX_CTRL1, 0x00 },
+ { SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 |
+ SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC },
+ { SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+ SX9310_REG_PROX_CTRL3_GAIN12_X4 },
+ { SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST },
+ { SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+ SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+ SX9310_REG_PROX_CTRL5_RAWFILT_1P25 },
+ { SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT },
+ { SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+ SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 },
+ { SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+ SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 },
+ { SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 |
+ SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 },
+ { SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+ SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 },
+ { SX9310_REG_PROX_CTRL11, 0x00 },
+ { SX9310_REG_PROX_CTRL12, 0x00 },
+ { SX9310_REG_PROX_CTRL13, 0x00 },
+ { SX9310_REG_PROX_CTRL14, 0x00 },
+ { SX9310_REG_PROX_CTRL15, 0x00 },
+ { SX9310_REG_PROX_CTRL16, 0x00 },
+ { SX9310_REG_PROX_CTRL17, 0x00 },
+ { SX9310_REG_PROX_CTRL18, 0x00 },
+ { SX9310_REG_PROX_CTRL19, 0x00 },
+ { SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+ SX9310_REG_SAR_CTRL0_SARHYST_8 },
+ { SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) },
+ { SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT },
};
/* Activate all channels and perform an initial compensation. */
@@ -809,7 +800,7 @@ static int sx9310_init_compensation(struct iio_dev *indio_dev)
/* run the compensation phase on all channels */
ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
- ctrl0 | SX9310_REG_PROX_CTRL0_EN_MASK);
+ ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
if (ret < 0)
return ret;
@@ -992,7 +983,7 @@ static int __maybe_unused sx9310_suspend(struct device *dev)
if (ret)
goto out;
- ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_EN_MASK;
+ ctrl0 = data->suspend_ctrl0 & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
if (ret)
goto out;
--
2.28.0.rc0.142.g3c755180ce-goog
next prev parent reply other threads:[~2020-07-28 15:13 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-25 0:40 [PATCH] iio: sx9310: Fixes dropped on initial commit Daniel Campello
2020-07-26 8:10 ` Andy Shevchenko
2020-07-26 11:53 ` Jonathan Cameron
2020-07-28 15:12 ` [PATCH 00/15] sx9310 iio driver updates Daniel Campello
2020-07-28 15:12 ` [PATCH 01/15] dt-bindings: iio: Add bindings for sx9310 sensor Daniel Campello
2020-07-28 22:06 ` Stephen Boyd
2020-07-28 15:12 ` Daniel Campello [this message]
2020-07-28 19:42 ` [PATCH 02/15] iio: sx9310: Update macros declarations Stephen Boyd
2020-07-28 15:12 ` [PATCH 03/15] iio: sx9310: Fix irq handling Daniel Campello
2020-07-28 18:08 ` Andy Shevchenko
2020-07-28 20:07 ` Daniel Campello
2020-07-28 20:15 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 04/15] iio: sx9310: Remove acpi and of table macros Daniel Campello
2020-07-28 18:09 ` Andy Shevchenko
2020-07-28 20:47 ` Daniel Campello
2020-07-28 21:28 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 05/15] iio: sx9310: Change from .probe to .probe_new Daniel Campello
2020-07-28 18:10 ` Andy Shevchenko
2020-07-28 19:32 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 06/15] iio: sx9310: Align memory Daniel Campello
2020-07-28 18:11 ` Andy Shevchenko
2020-07-28 21:26 ` Daniel Campello
2020-07-29 6:52 ` Andy Shevchenko
2020-07-28 15:12 ` [PATCH 07/15] iio: sx9310: Use long instead of int for channel bitmaps Daniel Campello
2020-07-28 18:13 ` Andy Shevchenko
2020-07-28 19:37 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 08/15] iio: sx9310: Use regmap_read_poll_timeout() for compensation Daniel Campello
2020-07-28 18:14 ` Andy Shevchenko
2020-07-28 19:37 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 09/15] iio: sx9310: Update copyright Daniel Campello
2020-07-28 15:12 ` [PATCH 10/15] iio: sx9310: Simplify error return handling Daniel Campello
2020-07-28 18:15 ` Andy Shevchenko
2020-07-28 19:40 ` Stephen Boyd
2020-07-28 21:23 ` Daniel Campello
2020-07-28 21:32 ` Stephen Boyd
2020-07-28 22:06 ` Daniel Campello
2020-07-28 15:12 ` [PATCH 11/15] iio: sx9310: Use variable to hold &client->dev Daniel Campello
2020-07-28 18:16 ` Andy Shevchenko
2020-07-28 19:41 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 12/15] iio: sx9310: Miscellaneous format fixes Daniel Campello
2020-07-28 18:16 ` Andy Shevchenko
2020-07-28 19:41 ` Stephen Boyd
2020-07-28 15:12 ` [PATCH 13/15] iio: sx9310: Add newlines to printks Daniel Campello
2020-07-28 18:19 ` Andy Shevchenko
2020-07-28 18:24 ` Joe Perches
2020-07-28 18:32 ` Andy Shevchenko
2020-07-28 15:12 ` [PATCH 14/15] iio: sx9310: Drop channel_users[] Daniel Campello
2020-07-28 18:20 ` Andy Shevchenko
2020-07-28 15:12 ` [PATCH 15/15] iio: sx9310: Enable vdd and svdd regulators at probe Daniel Campello
2020-07-28 18:21 ` Andy Shevchenko
2020-07-28 23:05 ` [PATCH v2 00/14] sx9310 iio driver updates Daniel Campello
2020-07-28 23:05 ` [PATCH v2 01/14] dt-bindings: iio: Add bindings for sx9310 sensor Daniel Campello
2020-07-29 0:52 ` Stephen Boyd
2020-07-28 23:05 ` [PATCH v2 02/14] iio: sx9310: Update macros declarations Daniel Campello
2020-07-28 23:05 ` [PATCH v2 03/14] iio: sx9310: Fix irq handling Daniel Campello
2020-07-29 8:40 ` Stephen Boyd
2020-07-28 23:05 ` [PATCH v2 04/14] iio: sx9310: Remove acpi and of table macros Daniel Campello
2020-07-29 6:54 ` Andy Shevchenko
2020-07-29 8:38 ` Stephen Boyd
2020-07-28 23:05 ` [PATCH v2 05/14] iio: sx9310: Change from .probe to .probe_new Daniel Campello
2020-07-28 23:05 ` [PATCH v2 06/14] iio: sx9310: Fixes various memory handling Daniel Campello
2020-07-28 23:05 ` [PATCH v2 07/14] iio: sx9310: Use long instead of int for channel bitmaps Daniel Campello
2020-07-29 1:03 ` Stephen Boyd
2020-07-29 7:00 ` Andy Shevchenko
2020-07-31 15:44 ` Daniel Campello
2020-07-31 15:52 ` Andy Shevchenko
2020-07-28 23:05 ` [PATCH v2 08/14] iio: sx9310: Use regmap_read_poll_timeout() for compensation Daniel Campello
2020-07-28 23:05 ` [PATCH v2 09/14] iio: sx9310: Update copyright Daniel Campello
2020-07-28 23:05 ` [PATCH v2 10/14] iio: sx9310: Simplify error return handling Daniel Campello
2020-07-29 8:42 ` Stephen Boyd
2020-07-28 23:05 ` [PATCH v2 11/14] iio: sx9310: Use variable to hold &client->dev Daniel Campello
2020-07-28 23:05 ` [PATCH v2 12/14] iio: sx9310: Miscellaneous format fixes Daniel Campello
2020-07-28 23:05 ` [PATCH v2 13/14] iio: sx9310: Drop channel_users[] Daniel Campello
2020-07-28 23:05 ` [PATCH v2 14/14] iio: sx9310: Enable vdd and svdd regulators at probe Daniel Campello
2020-07-29 0:50 ` [PATCH v2 00/14] sx9310 iio driver updates Stephen Boyd
2020-07-29 9:20 ` Stephen Boyd
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200728091057.2.Idb6af9292f18f54be0b62cede52b481063738707@changeid \
--to=campello@chromium.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=egranata@chromium.org \
--cc=gwendal@chromium.org \
--cc=jic23@kernel.org \
--cc=knaack.h@gmx.de \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.