All of lore.kernel.org
 help / color / mirror / Atom feed
From: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
To: alsa-devel@alsa-project.org
Cc: cezary.rojewski@intel.com, a-estrada@ti.com,
	andriy.shevchenko@intel.com, zakkaye@ti.com, tiwai@suse.com,
	jee.heng.sia@intel.com, pierre-louis.bossart@linux.intel.com,
	liam.r.girdwood@linux.intel.com, broonie@kernel.org,
	dmurphy@ti.com
Subject: [PATCH 3/3] ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset
Date: Wed, 29 Jul 2020 15:32:56 +0800	[thread overview]
Message-ID: <20200729073256.24028-4-michael.wei.hong.sit@intel.com> (raw)
In-Reply-To: <20200729073256.24028-1-michael.wei.hong.sit@intel.com>

Moving GPIO reset to a later stage and before clock registration to
ensure that the host system and codec clocks are in sync. If the host
register clock values prior to gpio reset, the last configured codec clock
is registered to the host. The codec then gets gpio resetted setting the
codec clocks to their default value, causing a mismatch. Host system will
skip clock setting thinking the codec clocks are already at the requested
rate.

ADC reset is added to ensure the next audio capture does not have
undesired artifacts. It is probably related to the original code
where the probe function resets the ADC prior to 1st record.

Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Reviewed-by: Sia Jee Heng <jee.heng.sia@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/codecs/tlv320aic32x4.c | 47 ++++++++++++++++++++++++--------
 1 file changed, 35 insertions(+), 12 deletions(-)

diff --git a/sound/soc/codecs/tlv320aic32x4.c b/sound/soc/codecs/tlv320aic32x4.c
index 5af438a00f95..37e14558d7c0 100644
--- a/sound/soc/codecs/tlv320aic32x4.c
+++ b/sound/soc/codecs/tlv320aic32x4.c
@@ -50,6 +50,28 @@ struct aic32x4_priv {
 	struct device *dev;
 };
 
+static int aic32x4_reset_adc(struct snd_soc_dapm_widget *w,
+			     struct snd_kcontrol *kcontrol, int event)
+{
+	struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
+	u32 adc_reg;
+
+	/*
+	 * Workaround: the datasheet does not mention a required programming
+	 * sequence but experiments show the ADC needs to be reset after each
+	 * capture to avoid audible artifacts.
+	 */
+	switch (event) {
+	case SND_SOC_DAPM_POST_PMD:
+		adc_reg = snd_soc_component_read32(component, AIC32X4_ADCSETUP);
+		snd_soc_component_write(component, AIC32X4_ADCSETUP, adc_reg |
+					AIC32X4_LADC_EN | AIC32X4_RADC_EN);
+		snd_soc_component_write(component, AIC32X4_ADCSETUP, adc_reg);
+		break;
+	}
+	return 0;
+};
+
 static int mic_bias_event(struct snd_soc_dapm_widget *w,
 	struct snd_kcontrol *kcontrol, int event)
 {
@@ -434,6 +456,7 @@ static const struct snd_soc_dapm_widget aic32x4_dapm_widgets[] = {
 	SND_SOC_DAPM_SUPPLY("Mic Bias", AIC32X4_MICBIAS, 6, 0, mic_bias_event,
 			SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
 
+	SND_SOC_DAPM_POST("ADC Reset", aic32x4_reset_adc),
 
 	SND_SOC_DAPM_OUTPUT("HPL"),
 	SND_SOC_DAPM_OUTPUT("HPR"),
@@ -665,8 +688,8 @@ static int aic32x4_set_processing_blocks(struct snd_soc_component *component,
 }
 
 static int aic32x4_setup_clocks(struct snd_soc_component *component,
-			unsigned int sample_rate, unsigned int channel,
-			unsigned int bit_depth)
+				unsigned int sample_rate, unsigned int channel,
+				unsigned int bit_depth)
 {
 	u8 aosr;
 	u16 dosr;
@@ -957,12 +980,6 @@ static int aic32x4_component_probe(struct snd_soc_component *component)
 	if (ret)
 		return ret;
 
-	if (gpio_is_valid(aic32x4->rstn_gpio)) {
-		ndelay(10);
-		gpio_set_value(aic32x4->rstn_gpio, 1);
-		mdelay(1);
-	}
-
 	snd_soc_component_write(component, AIC32X4_RESET, 0x01);
 
 	if (aic32x4->setup)
@@ -1195,10 +1212,6 @@ int aic32x4_probe(struct device *dev, struct regmap *regmap)
 		aic32x4->mclk_name = "mclk";
 	}
 
-	ret = aic32x4_register_clocks(dev, aic32x4->mclk_name);
-	if (ret)
-		return ret;
-
 	if (gpio_is_valid(aic32x4->rstn_gpio)) {
 		ret = devm_gpio_request_one(dev, aic32x4->rstn_gpio,
 				GPIOF_OUT_INIT_LOW, "tlv320aic32x4 rstn");
@@ -1220,6 +1233,16 @@ int aic32x4_probe(struct device *dev, struct regmap *regmap)
 		return ret;
 	}
 
+	if (gpio_is_valid(aic32x4->rstn_gpio)) {
+		ndelay(10);
+		gpio_set_value_cansleep(aic32x4->rstn_gpio, 1);
+		mdelay(1);
+	}
+
+	ret = aic32x4_register_clocks(dev, aic32x4->mclk_name);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 EXPORT_SYMBOL(aic32x4_probe);
-- 
2.17.1


  parent reply	other threads:[~2020-07-29  7:41 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-29  7:32 [PATCH 0/3] ASoC: codec: tlv3204: Codec workaround Michael Sit Wei Hong
2020-07-29  7:32 ` [PATCH 1/3] ASoC: codec: tlv3204: Enable 24 bit audio support Michael Sit Wei Hong
2020-07-29  7:32 ` [PATCH 2/3] ASoC: codec: tlv3204: Increased maximum supported channels Michael Sit Wei Hong
2020-07-29  7:32 ` Michael Sit Wei Hong [this message]
2020-07-29 12:31   ` [PATCH 3/3] ASoC: codec: tlv3204: Moving GPIO reset and add ADC reset Dan Murphy
2020-07-30  5:46     ` Sit, Michael Wei Hong
2020-07-30 12:33       ` Mark Brown
2020-08-03  1:54         ` Sit, Michael Wei Hong
2020-08-03  8:15           ` Shevchenko, Andriy
2020-08-03 10:44           ` Mark Brown
2020-08-04 10:31           ` Sit, Michael Wei Hong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200729073256.24028-4-michael.wei.hong.sit@intel.com \
    --to=michael.wei.hong.sit@intel.com \
    --cc=a-estrada@ti.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andriy.shevchenko@intel.com \
    --cc=broonie@kernel.org \
    --cc=cezary.rojewski@intel.com \
    --cc=dmurphy@ti.com \
    --cc=jee.heng.sia@intel.com \
    --cc=liam.r.girdwood@linux.intel.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    --cc=zakkaye@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.