All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mike Tipton <mdtipton@codeaurora.org>
To: georgi.djakov@linaro.org
Cc: bjorn.andersson@linaro.org, agross@kernel.org,
	linux-pm@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	Mike Tipton <mdtipton@codeaurora.org>
Subject: [PATCH v3 1/6] dt-bindings: interconnect: Add generic qcom bindings
Date: Fri, 31 Jul 2020 20:32:10 -0700	[thread overview]
Message-ID: <20200801033215.1440-2-mdtipton@codeaurora.org> (raw)
In-Reply-To: <20200801033215.1440-1-mdtipton@codeaurora.org>

Add generic qcom interconnect bindings that are common across platforms. In
particular, these include QCOM_ICC_TAG_* macros that clients can use when
calling icc_set_tag().

Signed-off-by: Mike Tipton <mdtipton@codeaurora.org>
---
 drivers/interconnect/qcom/icc-rpmh.h        | 18 ++------------
 include/dt-bindings/interconnect/qcom,icc.h | 26 +++++++++++++++++++++
 2 files changed, 28 insertions(+), 16 deletions(-)
 create mode 100644 include/dt-bindings/interconnect/qcom,icc.h

diff --git a/drivers/interconnect/qcom/icc-rpmh.h b/drivers/interconnect/qcom/icc-rpmh.h
index 903d25e61984..cb736b745e1a 100644
--- a/drivers/interconnect/qcom/icc-rpmh.h
+++ b/drivers/interconnect/qcom/icc-rpmh.h
@@ -6,6 +6,8 @@
 #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
 #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPMH_H__
 
+#include <dt-bindings/interconnect/qcom,icc.h>
+
 #define to_qcom_provider(_provider) \
 	container_of(_provider, struct qcom_icc_provider, provider)
 
@@ -44,22 +46,6 @@ struct bcm_db {
 #define MAX_BCM_PER_NODE	3
 #define MAX_VCD			10
 
-/*
- * The AMC bucket denotes constraints that are applied to hardware when
- * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
- * when the execution environment transitions between active and low power mode.
- */
-#define QCOM_ICC_BUCKET_AMC		0
-#define QCOM_ICC_BUCKET_WAKE		1
-#define QCOM_ICC_BUCKET_SLEEP		2
-#define QCOM_ICC_NUM_BUCKETS		3
-#define QCOM_ICC_TAG_AMC		BIT(QCOM_ICC_BUCKET_AMC)
-#define QCOM_ICC_TAG_WAKE		BIT(QCOM_ICC_BUCKET_WAKE)
-#define QCOM_ICC_TAG_SLEEP		BIT(QCOM_ICC_BUCKET_SLEEP)
-#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
-#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
-					 QCOM_ICC_TAG_SLEEP)
-
 /**
  * struct qcom_icc_node - Qualcomm specific interconnect nodes
  * @name: the node name used in debugfs
diff --git a/include/dt-bindings/interconnect/qcom,icc.h b/include/dt-bindings/interconnect/qcom,icc.h
new file mode 100644
index 000000000000..cd34f36daaaa
--- /dev/null
+++ b/include/dt-bindings/interconnect/qcom,icc.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
+#define __DT_BINDINGS_INTERCONNECT_QCOM_ICC_H
+
+/*
+ * The AMC bucket denotes constraints that are applied to hardware when
+ * icc_set_bw() completes, whereas the WAKE and SLEEP constraints are applied
+ * when the execution environment transitions between active and low power mode.
+ */
+#define QCOM_ICC_BUCKET_AMC		0
+#define QCOM_ICC_BUCKET_WAKE		1
+#define QCOM_ICC_BUCKET_SLEEP		2
+#define QCOM_ICC_NUM_BUCKETS		3
+
+#define QCOM_ICC_TAG_AMC		(1 << QCOM_ICC_BUCKET_AMC)
+#define QCOM_ICC_TAG_WAKE		(1 << QCOM_ICC_BUCKET_WAKE)
+#define QCOM_ICC_TAG_SLEEP		(1 << QCOM_ICC_BUCKET_SLEEP)
+#define QCOM_ICC_TAG_ACTIVE_ONLY	(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE)
+#define QCOM_ICC_TAG_ALWAYS		(QCOM_ICC_TAG_AMC | QCOM_ICC_TAG_WAKE |\
+					 QCOM_ICC_TAG_SLEEP)
+
+#endif
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project


  reply	other threads:[~2020-08-01  3:33 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-01  3:32 [PATCH v3 0/6] interconnect: qcom: Misc bcm-voter changes and fixes Mike Tipton
2020-08-01  3:32 ` Mike Tipton [this message]
2020-08-17 21:15   ` [PATCH v3 1/6] dt-bindings: interconnect: Add generic qcom bindings Rob Herring
2020-08-01  3:32 ` [PATCH v3 2/6] dt-bindings: interconnect: Add property to set BCM TCS wait behavior Mike Tipton
2020-08-17 21:16   ` Rob Herring
2020-08-01  3:32 ` [PATCH v3 3/6] interconnect: qcom: Support bcm-voter-specific " Mike Tipton
2020-08-01  3:32 ` [PATCH v3 4/6] interconnect: qcom: Only wait for completion in AMC/WAKE by default Mike Tipton
2020-08-01  3:32 ` [PATCH v3 5/6] interconnect: qcom: Add support for per-BCM scaling factors Mike Tipton
2020-08-01  3:32 ` [PATCH v3 6/6] interconnect: qcom: Fix small BW votes being truncated to zero Mike Tipton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200801033215.1440-2-mdtipton@codeaurora.org \
    --to=mdtipton@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=georgi.djakov@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.