From: Linus Walleij <linus.walleij@linaro.org> To: dri-devel@lists.freedesktop.org, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Sean Paul <sean@poorly.run> Cc: Linus Walleij <linus.walleij@linaro.org>, newbytee@protonmail.com, Stephan Gerhold <stephan@gerhold.net>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/4 v2] drm/mcde: Support using DSI in LP mode Date: Sun, 9 Aug 2020 00:31:20 +0200 [thread overview] Message-ID: <20200808223122.1492124-2-linus.walleij@linaro.org> (raw) In-Reply-To: <20200808223122.1492124-1-linus.walleij@linaro.org> It is possible to set a flag in the struct mipi_dsi_device so the panel is handled in low power (LP) mode. Some displays only support this mode and it is also good for testing. Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/gpu/drm/mcde/mcde_dsi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c index 76fecd7ab658..e335041e6e90 100644 --- a/drivers/gpu/drm/mcde/mcde_dsi.c +++ b/drivers/gpu/drm/mcde/mcde_dsi.c @@ -830,10 +830,11 @@ static void mcde_dsi_start(struct mcde_dsi *d) /* Command mode, clear IF1 ID */ val = readl(d->regs + DSI_CMD_MODE_CTL); /* - * If we enable low-power mode here, with - * val |= DSI_CMD_MODE_CTL_IF1_LP_EN + * If we enable low-power mode here, * then display updates become really slow. */ + if (d->mdsi->mode_flags & MIPI_DSI_MODE_LPM) + val |= DSI_CMD_MODE_CTL_IF1_LP_EN; val &= ~DSI_CMD_MODE_CTL_IF1_ID_MASK; writel(val, d->regs + DSI_CMD_MODE_CTL); @@ -922,10 +923,11 @@ static void mcde_dsi_bridge_pre_enable(struct drm_bridge *bridge) /* Command mode, clear IF1 ID */ val = readl(d->regs + DSI_CMD_MODE_CTL); /* - * If we enable low-power mode here with - * val |= DSI_CMD_MODE_CTL_IF1_LP_EN + * If we enable low-power mode here * the display updates become really slow. */ + if (d->mdsi->mode_flags & MIPI_DSI_MODE_LPM) + val |= DSI_CMD_MODE_CTL_IF1_LP_EN; val &= ~DSI_CMD_MODE_CTL_IF1_ID_MASK; writel(val, d->regs + DSI_CMD_MODE_CTL); } -- 2.26.2 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org> To: dri-devel@lists.freedesktop.org, Maarten Lankhorst <maarten.lankhorst@linux.intel.com>, Maxime Ripard <mripard@kernel.org>, Sean Paul <sean@poorly.run> Cc: newbytee@protonmail.com, Stephan Gerhold <stephan@gerhold.net>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/4 v2] drm/mcde: Support using DSI in LP mode Date: Sun, 9 Aug 2020 00:31:20 +0200 [thread overview] Message-ID: <20200808223122.1492124-2-linus.walleij@linaro.org> (raw) In-Reply-To: <20200808223122.1492124-1-linus.walleij@linaro.org> It is possible to set a flag in the struct mipi_dsi_device so the panel is handled in low power (LP) mode. Some displays only support this mode and it is also good for testing. Cc: newbytee@protonmail.com Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/gpu/drm/mcde/mcde_dsi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c index 76fecd7ab658..e335041e6e90 100644 --- a/drivers/gpu/drm/mcde/mcde_dsi.c +++ b/drivers/gpu/drm/mcde/mcde_dsi.c @@ -830,10 +830,11 @@ static void mcde_dsi_start(struct mcde_dsi *d) /* Command mode, clear IF1 ID */ val = readl(d->regs + DSI_CMD_MODE_CTL); /* - * If we enable low-power mode here, with - * val |= DSI_CMD_MODE_CTL_IF1_LP_EN + * If we enable low-power mode here, * then display updates become really slow. */ + if (d->mdsi->mode_flags & MIPI_DSI_MODE_LPM) + val |= DSI_CMD_MODE_CTL_IF1_LP_EN; val &= ~DSI_CMD_MODE_CTL_IF1_ID_MASK; writel(val, d->regs + DSI_CMD_MODE_CTL); @@ -922,10 +923,11 @@ static void mcde_dsi_bridge_pre_enable(struct drm_bridge *bridge) /* Command mode, clear IF1 ID */ val = readl(d->regs + DSI_CMD_MODE_CTL); /* - * If we enable low-power mode here with - * val |= DSI_CMD_MODE_CTL_IF1_LP_EN + * If we enable low-power mode here * the display updates become really slow. */ + if (d->mdsi->mode_flags & MIPI_DSI_MODE_LPM) + val |= DSI_CMD_MODE_CTL_IF1_LP_EN; val &= ~DSI_CMD_MODE_CTL_IF1_ID_MASK; writel(val, d->regs + DSI_CMD_MODE_CTL); } -- 2.26.2 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-08-08 22:33 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-08 22:31 [PATCH 1/4 v2] drm/mcde: Improve pixel fetcher FIFO depth setting Linus Walleij 2020-08-08 22:31 ` Linus Walleij 2020-08-08 22:31 ` Linus Walleij [this message] 2020-08-08 22:31 ` [PATCH 2/4 v2] drm/mcde: Support using DSI in LP mode Linus Walleij 2020-08-08 22:31 ` [PATCH 3/4 v2] drm/mcde: Fix display pipeline restart Linus Walleij 2020-08-08 22:31 ` Linus Walleij 2020-08-08 22:31 ` [PATCH 4/4 v2] drm/mcde: Enable the DSI link with display Linus Walleij 2020-08-08 22:31 ` Linus Walleij 2020-08-10 13:03 ` Daniel Vetter 2020-08-10 13:03 ` Daniel Vetter 2020-08-10 12:54 ` [PATCH 1/4 v2] drm/mcde: Improve pixel fetcher FIFO depth setting Daniel Vetter 2020-08-10 12:54 ` Daniel Vetter
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200808223122.1492124-2-linus.walleij@linaro.org \ --to=linus.walleij@linaro.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=maarten.lankhorst@linux.intel.com \ --cc=mripard@kernel.org \ --cc=newbytee@protonmail.com \ --cc=sean@poorly.run \ --cc=stephan@gerhold.net \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.