From: Lubomir Rintel <lkundrak@v3.sk> To: Andrzej Hajda <a.hajda@samsung.com> Cc: Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>, Rob Herring <robh+dt@kernel.org>, Neil Armstrong <narmstrong@baylibre.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Jonas Karlman <jonas@kwiboo.se>, Jernej Skrabec <jernej.skrabec@siol.net>, dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Lubomir Rintel <lkundrak@v3.sk> Subject: [PATCH v4 1/2] dt-bindings: display: himax,hx8837: Add Himax HX8837 bindings Date: Wed, 19 Aug 2020 12:22:45 +0200 [thread overview] Message-ID: <20200819102246.634039-2-lkundrak@v3.sk> (raw) In-Reply-To: <20200819102246.634039-1-lkundrak@v3.sk> Himax HX8837 is a secondary display controller used to drive the panel on OLPC platforms. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v3: - Moved to bindings/display/ - Added the ports - Converted to YAML - Removed Pavel's Ack, because the changes are substantial Changes since v2: - s/betweend/between/ Changes since v1: - s/load-gpio/load-gpios/ - Use interrupt bindings instead of gpio for the IRQ .../bindings/display/bridge/himax,hx8837.yaml | 96 +++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml b/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml new file mode 100644 index 0000000000000..f5b0a00f5089d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/himax,hx8837.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HX8837 Display Controller Device Tree Bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: himax,hx8837 + + reg: + const: 0xd + + load-gpios: + maxItems: 1 + description: GPIO specifier of DCON_LOAD pin (active high) + + stat-gpios: + minItems: 2 + description: GPIO specifier of DCON_STAT0 and DCON_STAT1 pins (active high) + + interrupts: + maxItems: 1 + description: Interrupt specifier of DCON_IRQ pin (edge falling) + + ports: + type: object + + properties: + port@0: + type: object + description: | + Video port for RGB input. + + port@1: + type: object + description: | + Video port connected to the panel. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - load-gpios + - stat-gpios + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lcd-controller@d { + compatible = "himax,hx8837"; + reg = <0x0d>; + stat-gpios = <&gpio 100 GPIO_ACTIVE_HIGH>, + <&gpio 101 GPIO_ACTIVE_HIGH>; + load-gpios = <&gpio 142 GPIO_ACTIVE_HIGH>; + interrupts = <&gpio 124 IRQ_TYPE_EDGE_FALLING>; + + ports { + #address-cells = <0x01>; + #size-cells = <0x00>; + + port@0 { + reg = <0x00>; + dcon_rgb_in: endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + port@1 { + reg = <0x01>; + dcon_gettl_out: endpoint { + remote-endpoint = <&panel_dettl_in>; + }; + }; + }; + }; + }; -- 2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: Lubomir Rintel <lkundrak@v3.sk> To: Andrzej Hajda <a.hajda@samsung.com> Cc: devicetree@vger.kernel.org, Jernej Skrabec <jernej.skrabec@siol.net>, Jonas Karlman <jonas@kwiboo.se>, David Airlie <airlied@linux.ie>, Neil Armstrong <narmstrong@baylibre.com>, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, Lubomir Rintel <lkundrak@v3.sk>, Rob Herring <robh+dt@kernel.org>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Subject: [PATCH v4 1/2] dt-bindings: display: himax, hx8837: Add Himax HX8837 bindings Date: Wed, 19 Aug 2020 12:22:45 +0200 [thread overview] Message-ID: <20200819102246.634039-2-lkundrak@v3.sk> (raw) In-Reply-To: <20200819102246.634039-1-lkundrak@v3.sk> Himax HX8837 is a secondary display controller used to drive the panel on OLPC platforms. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> --- Changes since v3: - Moved to bindings/display/ - Added the ports - Converted to YAML - Removed Pavel's Ack, because the changes are substantial Changes since v2: - s/betweend/between/ Changes since v1: - s/load-gpio/load-gpios/ - Use interrupt bindings instead of gpio for the IRQ .../bindings/display/bridge/himax,hx8837.yaml | 96 +++++++++++++++++++ 1 file changed, 96 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml b/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml new file mode 100644 index 0000000000000..f5b0a00f5089d --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/himax,hx8837.yaml @@ -0,0 +1,96 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2018,2019,2020 Lubomir Rintel <lkundrak@v3.sk> +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/himax,hx8837.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HX8837 Display Controller Device Tree Bindings + +maintainers: + - Lubomir Rintel <lkundrak@v3.sk> + +properties: + compatible: + const: himax,hx8837 + + reg: + const: 0xd + + load-gpios: + maxItems: 1 + description: GPIO specifier of DCON_LOAD pin (active high) + + stat-gpios: + minItems: 2 + description: GPIO specifier of DCON_STAT0 and DCON_STAT1 pins (active high) + + interrupts: + maxItems: 1 + description: Interrupt specifier of DCON_IRQ pin (edge falling) + + ports: + type: object + + properties: + port@0: + type: object + description: | + Video port for RGB input. + + port@1: + type: object + description: | + Video port connected to the panel. + + required: + - port@0 + - port@1 + +required: + - compatible + - reg + - load-gpios + - stat-gpios + - interrupts + - ports + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + lcd-controller@d { + compatible = "himax,hx8837"; + reg = <0x0d>; + stat-gpios = <&gpio 100 GPIO_ACTIVE_HIGH>, + <&gpio 101 GPIO_ACTIVE_HIGH>; + load-gpios = <&gpio 142 GPIO_ACTIVE_HIGH>; + interrupts = <&gpio 124 IRQ_TYPE_EDGE_FALLING>; + + ports { + #address-cells = <0x01>; + #size-cells = <0x00>; + + port@0 { + reg = <0x00>; + dcon_rgb_in: endpoint { + remote-endpoint = <&lcd0_rgb_out>; + }; + }; + + port@1 { + reg = <0x01>; + dcon_gettl_out: endpoint { + remote-endpoint = <&panel_dettl_in>; + }; + }; + }; + }; + }; -- 2.26.2 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2020-08-19 10:23 UTC|newest] Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <[PATCH v4 0/2] drm/bridge: hx8837: add a Himax HX8837 display controller driver> 2020-08-19 10:22 ` Lubomir Rintel 2020-08-19 10:22 ` Lubomir Rintel [this message] 2020-08-19 10:22 ` [PATCH v4 1/2] dt-bindings: display: himax, hx8837: Add Himax HX8837 bindings Lubomir Rintel 2020-08-25 21:54 ` Rob Herring 2020-08-25 21:54 ` Rob Herring 2020-08-19 10:22 ` [PATCH v4 2/2] drm/bridge: hx8837: add a Himax HX8837 display controller driver Lubomir Rintel 2020-08-19 10:22 ` Lubomir Rintel 2020-08-19 13:04 ` [PATCH v4 0/2] dt-bindings: display: himax,hx8837: Add Himax HX8837 bindings Lubomir Rintel 2020-08-19 13:04 ` Lubomir Rintel
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200819102246.634039-2-lkundrak@v3.sk \ --to=lkundrak@v3.sk \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=devicetree@vger.kernel.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=jernej.skrabec@siol.net \ --cc=jonas@kwiboo.se \ --cc=linux-kernel@vger.kernel.org \ --cc=narmstrong@baylibre.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.