From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org
Cc: mpe@ellerman.id.au, linuxppc-dev@lists.ozlabs.org,
Anshuman Khandual <anshuman.khandual@arm.com>,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Subject: [PATCH v2 03/13] mm/debug_vm_pgtable/ppc64: Avoid setting top bits in radom value
Date: Wed, 19 Aug 2020 18:30:57 +0530 [thread overview]
Message-ID: <20200819130107.478414-4-aneesh.kumar@linux.ibm.com> (raw)
In-Reply-To: <20200819130107.478414-1-aneesh.kumar@linux.ibm.com>
ppc64 use bit 62 to indicate a pte entry (_PAGE_PTE). Avoid setting that bit in
random value.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/debug_vm_pgtable.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
index 086309fb9b6f..57259e2dbd17 100644
--- a/mm/debug_vm_pgtable.c
+++ b/mm/debug_vm_pgtable.c
@@ -44,10 +44,13 @@
* entry type. But these bits might affect the ability to clear entries with
* pxx_clear() because of how dynamic page table folding works on s390. So
* while loading up the entries do not change the lower 4 bits. It does not
- * have affect any other platform.
+ * have affect any other platform. Also avoid the 62nd bit on ppc64 that is
+ * used to mark a pte entry.
*/
-#define S390_MASK_BITS 4
-#define RANDOM_ORVALUE GENMASK(BITS_PER_LONG - 1, S390_MASK_BITS)
+#define S390_SKIP_MASK GENMASK(3, 0)
+#define PPC64_SKIP_MASK GENMASK(62, 62)
+#define ARCH_SKIP_MASK (S390_SKIP_MASK | PPC64_SKIP_MASK)
+#define RANDOM_ORVALUE (GENMASK(BITS_PER_LONG - 1, 0) & ~ARCH_SKIP_MASK)
#define RANDOM_NZVALUE GENMASK(7, 0)
static void __init pte_basic_tests(unsigned long pfn, pgprot_t prot)
--
2.26.2
WARNING: multiple messages have this Message-ID (diff)
From: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
To: linux-mm@kvack.org, akpm@linux-foundation.org
Cc: linuxppc-dev@lists.ozlabs.org,
"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
Anshuman Khandual <anshuman.khandual@arm.com>
Subject: [PATCH v2 03/13] mm/debug_vm_pgtable/ppc64: Avoid setting top bits in radom value
Date: Wed, 19 Aug 2020 18:30:57 +0530 [thread overview]
Message-ID: <20200819130107.478414-4-aneesh.kumar@linux.ibm.com> (raw)
In-Reply-To: <20200819130107.478414-1-aneesh.kumar@linux.ibm.com>
ppc64 use bit 62 to indicate a pte entry (_PAGE_PTE). Avoid setting that bit in
random value.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
---
mm/debug_vm_pgtable.c | 9 ++++++---
1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/mm/debug_vm_pgtable.c b/mm/debug_vm_pgtable.c
index 086309fb9b6f..57259e2dbd17 100644
--- a/mm/debug_vm_pgtable.c
+++ b/mm/debug_vm_pgtable.c
@@ -44,10 +44,13 @@
* entry type. But these bits might affect the ability to clear entries with
* pxx_clear() because of how dynamic page table folding works on s390. So
* while loading up the entries do not change the lower 4 bits. It does not
- * have affect any other platform.
+ * have affect any other platform. Also avoid the 62nd bit on ppc64 that is
+ * used to mark a pte entry.
*/
-#define S390_MASK_BITS 4
-#define RANDOM_ORVALUE GENMASK(BITS_PER_LONG - 1, S390_MASK_BITS)
+#define S390_SKIP_MASK GENMASK(3, 0)
+#define PPC64_SKIP_MASK GENMASK(62, 62)
+#define ARCH_SKIP_MASK (S390_SKIP_MASK | PPC64_SKIP_MASK)
+#define RANDOM_ORVALUE (GENMASK(BITS_PER_LONG - 1, 0) & ~ARCH_SKIP_MASK)
#define RANDOM_NZVALUE GENMASK(7, 0)
static void __init pte_basic_tests(unsigned long pfn, pgprot_t prot)
--
2.26.2
next prev parent reply other threads:[~2020-08-19 13:02 UTC|newest]
Thread overview: 73+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-19 13:00 [PATCH v2 00/13] mm/debug_vm_pgtable fixes Aneesh Kumar K.V
2020-08-19 13:00 ` Aneesh Kumar K.V
2020-08-19 13:00 ` [PATCH v2 01/13] powerpc/mm: Add DEBUG_VM WARN for pmd_clear Aneesh Kumar K.V
2020-08-19 13:00 ` Aneesh Kumar K.V
2020-08-19 13:00 ` [PATCH v2 02/13] powerpc/mm: Move setting pte specific flags to pfn_pte Aneesh Kumar K.V
2020-08-19 13:00 ` Aneesh Kumar K.V
2020-08-19 13:00 ` Aneesh Kumar K.V [this message]
2020-08-19 13:00 ` [PATCH v2 03/13] mm/debug_vm_pgtable/ppc64: Avoid setting top bits in radom value Aneesh Kumar K.V
2020-08-19 13:00 ` [PATCH v2 04/13] mm/debug_vm_pgtables/hugevmap: Use the arch helper to identify huge vmap support Aneesh Kumar K.V
2020-08-19 13:00 ` Aneesh Kumar K.V
2020-08-19 16:29 ` kernel test robot
2020-08-19 16:29 ` kernel test robot
2020-08-19 16:29 ` kernel test robot
2020-08-20 5:31 ` Aneesh Kumar K.V
2020-08-20 5:31 ` Aneesh Kumar K.V
2020-08-21 8:38 ` Anshuman Khandual
2020-08-21 8:38 ` Anshuman Khandual
2020-08-19 13:00 ` [PATCH v2 05/13] mm/debug_vm_pgtable/savedwrite: Enable savedwrite test with CONFIG_NUMA_BALANCING Aneesh Kumar K.V
2020-08-19 13:00 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 06/13] mm/debug_vm_pgtable/THP: Mark the pte entry huge before using set_pmd/pud_at Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 07/13] mm/debug_vm_pgtable/set_pte/pmd/pud: Don't use set_*_at to update an existing pte entry Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-20 14:32 ` Christophe Leroy
2020-08-21 7:14 ` Aneesh Kumar K.V
2020-08-21 8:20 ` Anshuman Khandual
2020-08-19 13:01 ` [PATCH v2 08/13] mm/debug_vm_pgtable/thp: Use page table depost/withdraw with THP Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 09/13] mm/debug_vm_pgtable/locks: Move non page table modifying test together Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 10/13] mm/debug_vm_pgtable/locks: Take correct page table lock Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-21 8:03 ` Anshuman Khandual
2020-08-21 8:03 ` Anshuman Khandual
2020-08-21 8:08 ` Aneesh Kumar K.V
2020-08-21 8:08 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 11/13] mm/debug_vm_pgtable/pmd_clear: Don't use pmd/pud_clear on pte entries Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 12/13] mm/debug_vm_pgtable/hugetlb: Disable hugetlb test on ppc64 Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-19 13:01 ` [PATCH v2 13/13] mm/debug_vm_pgtable: populate a pte entry before fetching it Aneesh Kumar K.V
2020-08-19 13:01 ` Aneesh Kumar K.V
2020-08-19 13:45 ` [PATCH v2 00/13] mm/debug_vm_pgtable fixes Aneesh Kumar K.V
2020-08-19 13:45 ` Aneesh Kumar K.V
2020-08-21 3:33 ` Anshuman Khandual
2020-08-21 3:33 ` Anshuman Khandual
2020-08-21 4:20 ` Anshuman Khandual
2020-08-21 4:20 ` Anshuman Khandual
2020-08-21 6:53 ` Aneesh Kumar K.V
2020-08-21 6:53 ` Aneesh Kumar K.V
2020-08-21 8:01 ` Anshuman Khandual
2020-08-21 8:01 ` Anshuman Khandual
2020-08-21 8:10 ` Aneesh Kumar K.V
2020-08-21 8:10 ` Aneesh Kumar K.V
2020-08-21 8:50 ` Aneesh Kumar K.V
2020-08-21 8:50 ` Aneesh Kumar K.V
2020-08-21 9:09 ` Anshuman Khandual
2020-08-21 9:09 ` Anshuman Khandual
2020-08-21 8:51 ` Anshuman Khandual
2020-08-21 8:51 ` Anshuman Khandual
2020-08-21 8:51 ` Anshuman Khandual
2020-08-21 8:51 ` Anshuman Khandual
2020-08-21 8:51 ` Anshuman Khandual
2020-09-01 8:03 ` Christophe Leroy
2020-09-01 8:03 ` Christophe Leroy
2020-09-01 8:03 ` Christophe Leroy
2020-09-01 8:03 ` Christophe Leroy
2020-09-01 8:03 ` Christophe Leroy
2020-09-01 9:11 ` Anshuman Khandual
2020-09-01 9:11 ` Anshuman Khandual
2020-09-01 9:11 ` Anshuman Khandual
2020-09-01 9:11 ` Anshuman Khandual
2020-09-01 9:11 ` Anshuman Khandual
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200819130107.478414-4-aneesh.kumar@linux.ibm.com \
--to=aneesh.kumar@linux.ibm.com \
--cc=akpm@linux-foundation.org \
--cc=anshuman.khandual@arm.com \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.