All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: "David S . Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Sergei Shtylyov <sergei.shtylyov@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Oleksij Rempel <linux@rempel-privat.de>,
	Philippe Schenker <philippe.schenker@toradex.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Dan Murphy <dmurphy@ti.com>,
	Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>,
	Wolfram Sang <wsa+renesas@sang-engineering.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 7/7] arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
Date: Wed, 19 Aug 2020 15:43:44 +0200	[thread overview]
Message-ID: <20200819134344.27813-8-geert+renesas@glider.be> (raw)
In-Reply-To: <20200819134344.27813-1-geert+renesas@glider.be>

Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).

Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode.  This was wrong, as these are meant solely for the
PHY, not for the MAC.  Hence properties were introduced for explicit
configuration of these delays.

Convert the RZ/G2 DTS files from the old to the new scheme:
  - Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
    properties to the SoC .dtsi files, to be overridden by board files
    where needed,
  - Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
    the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
    overrides.

Notes:
  - RZ/G2E does not support TX internal delay handling.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
This depends on "[PATCH v3 5/7] ravb: Add support for explicit internal
clock delay configuration", and thus must not be applied before its
dependency has hit upstream.

v3:
  - Update new beacon-renesom-som.dtsi and r8a774e1.dtsi,

v2:
  - Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps".
---
 arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi | 3 ++-
 arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi     | 2 +-
 arch/arm64/boot/dts/renesas/r8a774a1.dtsi           | 2 ++
 arch/arm64/boot/dts/renesas/r8a774b1.dtsi           | 2 ++
 arch/arm64/boot/dts/renesas/r8a774c0.dtsi           | 1 +
 arch/arm64/boot/dts/renesas/r8a774e1.dtsi           | 2 ++
 6 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
index 97272f5fa0abf92e..8ac167aa18f04743 100644
--- a/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
+++ b/arch/arm64/boot/dts/renesas/beacon-renesom-som.dtsi
@@ -55,7 +55,8 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-id";
+	rx-internal-delay-ps = <1800>;
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
index 178401a34cbf8d38..46f1ca0b7ef5e7c2 100644
--- a/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
+++ b/arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi
@@ -19,7 +19,7 @@
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
 	phy-handle = <&phy0>;
-	phy-mode = "rgmii-txid";
+	tx-internal-delay-ps = <2000>;
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index 8e80f50132ad55f5..ed99863f1dd09fd0 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1115,6 +1115,8 @@
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index 49e5addcfd97af01..1c76de24d3ea4844 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -989,6 +989,8 @@
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 42171190cce4602d..9fdca4c55ba95608 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -960,6 +960,7 @@
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index 0f86cfd524258353..0975bcbc3c502535 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1139,6 +1139,8 @@
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 812>;
 			phy-mode = "rgmii";
+			rx-internal-delay-ps = <0>;
+			tx-internal-delay-ps = <0>;
 			iommus = <&ipmmu_ds0 16>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.17.1


      parent reply	other threads:[~2020-08-19 13:51 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-19 13:43 [PATCH v3 0/7] net/ravb: Add support for explicit internal clock delay configuration Geert Uytterhoeven
2020-08-19 13:43 ` [PATCH v3 1/7] dt-bindings: net: ethernet-controller: Add internal delay properties Geert Uytterhoeven
2020-08-24 17:55   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 2/7] dt-bindings: net: renesas,ravb: Document internal clock " Geert Uytterhoeven
2020-08-24 17:56   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 3/7] dt-bindings: net: renesas,etheravb: Convert to json-schema Geert Uytterhoeven
2020-08-24 17:57   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 4/7] ravb: Split delay handling in parsing and applying Geert Uytterhoeven
2020-08-24 17:57   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 5/7] ravb: Add support for explicit internal clock delay configuration Geert Uytterhoeven
2020-08-24 17:58   ` Florian Fainelli
2020-08-19 13:43 ` [PATCH v3 6/7] arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling Geert Uytterhoeven
2020-08-19 13:43 ` Geert Uytterhoeven [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200819134344.27813-8-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=f.fainelli@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kazuya.mizuguchi.ks@renesas.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=linux@rempel-privat.de \
    --cc=magnus.damm@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=philippe.schenker@toradex.com \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@gmail.com \
    --cc=wsa+renesas@sang-engineering.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.