From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com>, <robh@kernel.org> Cc: <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>, Dan Murphy <dmurphy@ti.com> Subject: [PATCH] ASoC: tlv320adcx140: Add digital mic channel enable routing Date: Fri, 28 Aug 2020 06:28:55 -0500 [thread overview] Message-ID: <20200828112855.10112-1-dmurphy@ti.com> (raw) Add the audio routing map to enable the digital mic paths when the analog mic paths are not enabled. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tlv320adcx140.c | 37 ++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 5cd50d841177..5d1b2a03f0ac 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -412,6 +412,16 @@ static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = { SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0), SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0), + SND_SOC_DAPM_ADC("CH1_DIG", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0), + SND_SOC_DAPM_ADC("CH2_DIG", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0), + SND_SOC_DAPM_ADC("CH3_DIG", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0), + SND_SOC_DAPM_ADC("CH4_DIG", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0), + SND_SOC_DAPM_ADC("CH5_DIG", "CH5 Capture", ADCX140_IN_CH_EN, 3, 0), + SND_SOC_DAPM_ADC("CH6_DIG", "CH6 Capture", ADCX140_IN_CH_EN, 2, 0), + SND_SOC_DAPM_ADC("CH7_DIG", "CH7 Capture", ADCX140_IN_CH_EN, 1, 0), + SND_SOC_DAPM_ADC("CH8_DIG", "CH8 Capture", ADCX140_IN_CH_EN, 0, 0), + + SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0, &adcx140_dapm_ch1_en_switch), SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0, @@ -470,6 +480,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"CH3_ASI_EN", "Switch", "CH3_ADC"}, {"CH4_ASI_EN", "Switch", "CH4_ADC"}, + {"CH1_ASI_EN", "Switch", "CH1_DIG"}, + {"CH2_ASI_EN", "Switch", "CH2_DIG"}, + {"CH3_ASI_EN", "Switch", "CH3_DIG"}, + {"CH4_ASI_EN", "Switch", "CH4_DIG"}, + {"CH5_ASI_EN", "Switch", "CH5_DIG"}, + {"CH6_ASI_EN", "Switch", "CH6_DIG"}, + {"CH7_ASI_EN", "Switch", "CH7_DIG"}, + {"CH8_ASI_EN", "Switch", "CH8_DIG"}, + {"CH5_ASI_EN", "Switch", "CH5_OUT"}, {"CH6_ASI_EN", "Switch", "CH6_OUT"}, {"CH7_ASI_EN", "Switch", "CH7_OUT"}, @@ -541,6 +560,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"}, {"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"}, + {"MIC1P Input Mux", NULL, "CH1_DIG"}, + {"MIC1M Input Mux", NULL, "CH2_DIG"}, + {"MIC2P Input Mux", NULL, "CH3_DIG"}, + {"MIC2M Input Mux", NULL, "CH4_DIG"}, + {"MIC3P Input Mux", NULL, "CH5_DIG"}, + {"MIC3M Input Mux", NULL, "CH6_DIG"}, + {"MIC4P Input Mux", NULL, "CH7_DIG"}, + {"MIC4M Input Mux", NULL, "CH8_DIG"}, + {"MIC1 Analog Mux", "Line In", "MIC1P"}, {"MIC2 Analog Mux", "Line In", "MIC2P"}, {"MIC3 Analog Mux", "Line In", "MIC3P"}, @@ -554,6 +582,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"MIC3M Input Mux", "Analog", "MIC3M"}, {"MIC4P Input Mux", "Analog", "MIC4P"}, {"MIC4M Input Mux", "Analog", "MIC4M"}, + + {"MIC1P Input Mux", "Digital", "MIC1P"}, + {"MIC1M Input Mux", "Digital", "MIC1M"}, + {"MIC2P Input Mux", "Digital", "MIC2P"}, + {"MIC2M Input Mux", "Digital", "MIC2M"}, + {"MIC3P Input Mux", "Digital", "MIC3P"}, + {"MIC3M Input Mux", "Digital", "MIC3M"}, + {"MIC4P Input Mux", "Digital", "MIC4P"}, + {"MIC4M Input Mux", "Digital", "MIC4M"}, }; static const struct snd_kcontrol_new adcx140_snd_controls[] = { -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Dan Murphy <dmurphy@ti.com> To: <lgirdwood@gmail.com>, <broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.com>, <robh@kernel.org> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org, Dan Murphy <dmurphy@ti.com> Subject: [PATCH] ASoC: tlv320adcx140: Add digital mic channel enable routing Date: Fri, 28 Aug 2020 06:28:55 -0500 [thread overview] Message-ID: <20200828112855.10112-1-dmurphy@ti.com> (raw) Add the audio routing map to enable the digital mic paths when the analog mic paths are not enabled. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- sound/soc/codecs/tlv320adcx140.c | 37 ++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c index 5cd50d841177..5d1b2a03f0ac 100644 --- a/sound/soc/codecs/tlv320adcx140.c +++ b/sound/soc/codecs/tlv320adcx140.c @@ -412,6 +412,16 @@ static const struct snd_soc_dapm_widget adcx140_dapm_widgets[] = { SND_SOC_DAPM_ADC("CH3_ADC", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0), SND_SOC_DAPM_ADC("CH4_ADC", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0), + SND_SOC_DAPM_ADC("CH1_DIG", "CH1 Capture", ADCX140_IN_CH_EN, 7, 0), + SND_SOC_DAPM_ADC("CH2_DIG", "CH2 Capture", ADCX140_IN_CH_EN, 6, 0), + SND_SOC_DAPM_ADC("CH3_DIG", "CH3 Capture", ADCX140_IN_CH_EN, 5, 0), + SND_SOC_DAPM_ADC("CH4_DIG", "CH4 Capture", ADCX140_IN_CH_EN, 4, 0), + SND_SOC_DAPM_ADC("CH5_DIG", "CH5 Capture", ADCX140_IN_CH_EN, 3, 0), + SND_SOC_DAPM_ADC("CH6_DIG", "CH6 Capture", ADCX140_IN_CH_EN, 2, 0), + SND_SOC_DAPM_ADC("CH7_DIG", "CH7 Capture", ADCX140_IN_CH_EN, 1, 0), + SND_SOC_DAPM_ADC("CH8_DIG", "CH8 Capture", ADCX140_IN_CH_EN, 0, 0), + + SND_SOC_DAPM_SWITCH("CH1_ASI_EN", SND_SOC_NOPM, 0, 0, &adcx140_dapm_ch1_en_switch), SND_SOC_DAPM_SWITCH("CH2_ASI_EN", SND_SOC_NOPM, 0, 0, @@ -470,6 +480,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"CH3_ASI_EN", "Switch", "CH3_ADC"}, {"CH4_ASI_EN", "Switch", "CH4_ADC"}, + {"CH1_ASI_EN", "Switch", "CH1_DIG"}, + {"CH2_ASI_EN", "Switch", "CH2_DIG"}, + {"CH3_ASI_EN", "Switch", "CH3_DIG"}, + {"CH4_ASI_EN", "Switch", "CH4_DIG"}, + {"CH5_ASI_EN", "Switch", "CH5_DIG"}, + {"CH6_ASI_EN", "Switch", "CH6_DIG"}, + {"CH7_ASI_EN", "Switch", "CH7_DIG"}, + {"CH8_ASI_EN", "Switch", "CH8_DIG"}, + {"CH5_ASI_EN", "Switch", "CH5_OUT"}, {"CH6_ASI_EN", "Switch", "CH6_OUT"}, {"CH7_ASI_EN", "Switch", "CH7_OUT"}, @@ -541,6 +560,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"PDM Clk Div Select", "705.6 kHz", "MIC1P Input Mux"}, {"PDM Clk Div Select", "5.6448 MHz", "MIC1P Input Mux"}, + {"MIC1P Input Mux", NULL, "CH1_DIG"}, + {"MIC1M Input Mux", NULL, "CH2_DIG"}, + {"MIC2P Input Mux", NULL, "CH3_DIG"}, + {"MIC2M Input Mux", NULL, "CH4_DIG"}, + {"MIC3P Input Mux", NULL, "CH5_DIG"}, + {"MIC3M Input Mux", NULL, "CH6_DIG"}, + {"MIC4P Input Mux", NULL, "CH7_DIG"}, + {"MIC4M Input Mux", NULL, "CH8_DIG"}, + {"MIC1 Analog Mux", "Line In", "MIC1P"}, {"MIC2 Analog Mux", "Line In", "MIC2P"}, {"MIC3 Analog Mux", "Line In", "MIC3P"}, @@ -554,6 +582,15 @@ static const struct snd_soc_dapm_route adcx140_audio_map[] = { {"MIC3M Input Mux", "Analog", "MIC3M"}, {"MIC4P Input Mux", "Analog", "MIC4P"}, {"MIC4M Input Mux", "Analog", "MIC4M"}, + + {"MIC1P Input Mux", "Digital", "MIC1P"}, + {"MIC1M Input Mux", "Digital", "MIC1M"}, + {"MIC2P Input Mux", "Digital", "MIC2P"}, + {"MIC2M Input Mux", "Digital", "MIC2M"}, + {"MIC3P Input Mux", "Digital", "MIC3P"}, + {"MIC3M Input Mux", "Digital", "MIC3M"}, + {"MIC4P Input Mux", "Digital", "MIC4P"}, + {"MIC4M Input Mux", "Digital", "MIC4M"}, }; static const struct snd_kcontrol_new adcx140_snd_controls[] = { -- 2.28.0
next reply other threads:[~2020-08-28 11:30 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-28 11:28 Dan Murphy [this message] 2020-08-28 11:28 ` [PATCH] ASoC: tlv320adcx140: Add digital mic channel enable routing Dan Murphy 2020-08-28 14:50 ` Mark Brown 2020-08-28 14:50 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200828112855.10112-1-dmurphy@ti.com \ --to=dmurphy@ti.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=robh@kernel.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.