All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	David Lechner <david@lechnology.com>,
	Sekhar Nori <nsekhar@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-msm@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 05/10] clk: sunxi-ng: Simplify with dev_err_probe()
Date: Wed,  2 Sep 2020 17:03:43 +0200	[thread overview]
Message-ID: <20200902150348.14465-5-krzk@kernel.org> (raw)
In-Reply-To: <20200902150348.14465-1-krzk@kernel.org>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c     | 28 ++++++++----------------
 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c  | 19 +++++-----------
 drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c |  9 +++-----
 3 files changed, 18 insertions(+), 38 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 524f33275bc7..0de024d3e466 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -297,29 +297,19 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	mod_clk = devm_clk_get(&pdev->dev, "mod");
-	if (IS_ERR(mod_clk)) {
-		ret = PTR_ERR(mod_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(mod_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(mod_clk),
+				     "Couldn't get mod clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The clocks need to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
index 6616e8114f62..541c3d32b93e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
@@ -215,21 +215,14 @@ static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
index 4b4a507d04ed..f6a3989fea36 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
@@ -103,12 +103,9 @@ static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	David Lechner <david@lechnology.com>,
	Sekhar Nori <nsekhar@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-msm@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 05/10] clk: sunxi-ng: Simplify with dev_err_probe()
Date: Wed,  2 Sep 2020 17:03:43 +0200	[thread overview]
Message-ID: <20200902150348.14465-5-krzk@kernel.org> (raw)
In-Reply-To: <20200902150348.14465-1-krzk@kernel.org>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c     | 28 ++++++++----------------
 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c  | 19 +++++-----------
 drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c |  9 +++-----
 3 files changed, 18 insertions(+), 38 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 524f33275bc7..0de024d3e466 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -297,29 +297,19 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	mod_clk = devm_clk_get(&pdev->dev, "mod");
-	if (IS_ERR(mod_clk)) {
-		ret = PTR_ERR(mod_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(mod_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(mod_clk),
+				     "Couldn't get mod clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The clocks need to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
index 6616e8114f62..541c3d32b93e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
@@ -215,21 +215,14 @@ static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
index 4b4a507d04ed..f6a3989fea36 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
@@ -103,12 +103,9 @@ static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	David Lechner <david@lechnology.com>,
	Sekhar Nori <nsekhar@ti.com>,
	Santosh Shilimkar <ssantosh@kernel.org>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Jerome Brunet <jbrunet@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	Martin Blumenstingl <martin.blumenstingl@googlemail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-msm@vger.kernel.org
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Subject: [PATCH 05/10] clk: sunxi-ng: Simplify with dev_err_probe()
Date: Wed,  2 Sep 2020 17:03:43 +0200	[thread overview]
Message-ID: <20200902150348.14465-5-krzk@kernel.org> (raw)
In-Reply-To: <20200902150348.14465-1-krzk@kernel.org>

Common pattern of handling deferred probe can be simplified with
dev_err_probe().  Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 drivers/clk/sunxi-ng/ccu-sun8i-de2.c     | 28 ++++++++----------------
 drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c  | 19 +++++-----------
 drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c |  9 +++-----
 3 files changed, 18 insertions(+), 38 deletions(-)

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
index 524f33275bc7..0de024d3e466 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-de2.c
@@ -297,29 +297,19 @@ static int sunxi_de2_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	mod_clk = devm_clk_get(&pdev->dev, "mod");
-	if (IS_ERR(mod_clk)) {
-		ret = PTR_ERR(mod_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get mod clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(mod_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(mod_clk),
+				     "Couldn't get mod clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The clocks need to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
index 6616e8114f62..541c3d32b93e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-de.c
@@ -215,21 +215,14 @@ static int sun9i_a80_de_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev,
-				"Couldn't get reset control: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(rstc))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rstc),
+				     "Couldn't get reset control\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
diff --git a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
index 4b4a507d04ed..f6a3989fea36 100644
--- a/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
+++ b/drivers/clk/sunxi-ng/ccu-sun9i-a80-usb.c
@@ -103,12 +103,9 @@ static int sun9i_a80_usb_clk_probe(struct platform_device *pdev)
 		return PTR_ERR(reg);
 
 	bus_clk = devm_clk_get(&pdev->dev, "bus");
-	if (IS_ERR(bus_clk)) {
-		ret = PTR_ERR(bus_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "Couldn't get bus clk: %d\n", ret);
-		return ret;
-	}
+	if (IS_ERR(bus_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(bus_clk),
+				     "Couldn't get bus clk\n");
 
 	/* The bus clock needs to be enabled for us to access the registers */
 	ret = clk_prepare_enable(bus_clk);
-- 
2.17.1


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

  parent reply	other threads:[~2020-09-02 15:04 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-02 15:03 [PATCH 01/10] clk: at91: Drop unused at91sam9g45_pcr_layout Krzysztof Kozlowski
2020-09-02 15:03 ` Krzysztof Kozlowski
2020-09-02 15:03 ` Krzysztof Kozlowski
2020-09-02 15:03 ` [PATCH 02/10] clk: fixed: Add missing kerneldoc Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03 ` [PATCH 03/10] clk: bulk: Simplify with dev_err_probe() Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03 ` [PATCH 04/10] clk: gpio: " Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-10 22:01   ` Stephen Boyd
2020-09-10 22:01     ` Stephen Boyd
2020-09-10 22:01     ` Stephen Boyd
2020-09-11 15:29     ` Krzysztof Kozlowski
2020-09-11 15:29       ` Krzysztof Kozlowski
2020-09-11 15:29       ` Krzysztof Kozlowski
2020-09-02 15:03 ` Krzysztof Kozlowski [this message]
2020-09-02 15:03   ` [PATCH 05/10] clk: sunxi-ng: " Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03 ` [PATCH 06/10] clk: keystone: " Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03 ` [PATCH 07/10] clk: meson: " Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-07  8:30   ` Jerome Brunet
2020-09-07  8:30     ` Jerome Brunet
2020-09-07  8:30     ` Jerome Brunet
2020-09-02 15:03 ` [PATCH 08/10] clk: qcom: " Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03 ` [PATCH 09/10] clk: davinci: Add missing kerneldoc Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:37   ` David Lechner
2020-09-02 15:37     ` David Lechner
2020-09-02 15:37     ` David Lechner
2020-09-02 15:03 ` [PATCH 10/10] clk: davinci: Simplify with dev_err_probe() Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:03   ` Krzysztof Kozlowski
2020-09-02 15:37   ` David Lechner
2020-09-02 15:37     ` David Lechner
2020-09-02 15:37     ` David Lechner
2020-09-02 16:35 ` [PATCH 01/10] clk: at91: Drop unused at91sam9g45_pcr_layout Alexandre Belloni
2020-09-02 16:35   ` Alexandre Belloni
2020-09-02 16:35   ` Alexandre Belloni
2020-09-11 15:34   ` Krzysztof Kozlowski
2020-09-11 15:34     ` Krzysztof Kozlowski
2020-09-11 15:34     ` Krzysztof Kozlowski
2020-09-15  0:01     ` Stephen Boyd
2020-09-15  0:01       ` Stephen Boyd
2020-09-15  0:01       ` Stephen Boyd
2020-09-16 16:15       ` Krzysztof Kozlowski
2020-09-16 16:15         ` Krzysztof Kozlowski
2020-09-16 16:15         ` Krzysztof Kozlowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200902150348.14465-5-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=agross@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=david@lechnology.com \
    --cc=jbrunet@baylibre.com \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=martin.blumenstingl@googlemail.com \
    --cc=mripard@kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=narmstrong@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=nsekhar@ti.com \
    --cc=sboyd@kernel.org \
    --cc=ssantosh@kernel.org \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.