From: Ben Levinsky <ben.levinsky@xilinx.com> To: stefanos@xilinx.com, michals@xilinx.com, michael.auchter@ni.com Cc: devicetree@vger.kernel.org, mathieu.poirier@linaro.org, emooring@xilinx.com, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, jliang@xilinx.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v11 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. Date: Wed, 2 Sep 2020 09:58:42 -0700 [thread overview] Message-ID: <20200902165846.3366-2-ben.levinsky@xilinx.com> (raw) In-Reply-To: <20200902165846.3366-1-ben.levinsky@xilinx.com> Add ZynqMP firmware ioctl enums for RPU configuration. Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> --- v3: - add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct v4: - add default values for enums --- include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 5968df82b991..bb347dfe4ba4 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -104,6 +104,10 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE = 0, + IOCTL_SET_RPU_OPER_MODE = 1, + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, + IOCTL_TCM_COMB_CONFIG = 3, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY, IOCTL_SET_PLL_FRAC_MODE, @@ -129,6 +133,21 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR, }; +enum rpu_oper_mode { + PM_RPU_MODE_LOCKSTEP = 0, + PM_RPU_MODE_SPLIT = 1, +}; + +enum rpu_boot_mem { + PM_RPU_BOOTMEM_LOVEC = 0, + PM_RPU_BOOTMEM_HIVEC = 1, +}; + +enum rpu_tcm_comb { + PM_RPU_TCM_SPLIT = 0, + PM_RPU_TCM_COMB = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE, PM_RESET_ACTION_ASSERT, -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Ben Levinsky <ben.levinsky@xilinx.com> To: stefanos@xilinx.com, michals@xilinx.com, michael.auchter@ni.com Cc: devicetree@vger.kernel.org, emooring@xilinx.com, mathieu.poirier@linaro.org, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, jliang@xilinx.com, robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v11 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration. Date: Wed, 2 Sep 2020 09:58:42 -0700 [thread overview] Message-ID: <20200902165846.3366-2-ben.levinsky@xilinx.com> (raw) In-Reply-To: <20200902165846.3366-1-ben.levinsky@xilinx.com> Add ZynqMP firmware ioctl enums for RPU configuration. Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> --- v3: - add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct v4: - add default values for enums --- include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 5968df82b991..bb347dfe4ba4 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -104,6 +104,10 @@ enum pm_ret_status { }; enum pm_ioctl_id { + IOCTL_GET_RPU_OPER_MODE = 0, + IOCTL_SET_RPU_OPER_MODE = 1, + IOCTL_RPU_BOOT_ADDR_CONFIG = 2, + IOCTL_TCM_COMB_CONFIG = 3, IOCTL_SD_DLL_RESET = 6, IOCTL_SET_SD_TAPDELAY, IOCTL_SET_PLL_FRAC_MODE, @@ -129,6 +133,21 @@ enum pm_query_id { PM_QID_CLOCK_GET_MAX_DIVISOR, }; +enum rpu_oper_mode { + PM_RPU_MODE_LOCKSTEP = 0, + PM_RPU_MODE_SPLIT = 1, +}; + +enum rpu_boot_mem { + PM_RPU_BOOTMEM_LOVEC = 0, + PM_RPU_BOOTMEM_HIVEC = 1, +}; + +enum rpu_tcm_comb { + PM_RPU_TCM_SPLIT = 0, + PM_RPU_TCM_COMB = 1, +}; + enum zynqmp_pm_reset_action { PM_RESET_ACTION_RELEASE, PM_RESET_ACTION_ASSERT, -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-02 16:59 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-02 16:58 [PATCH v11 0/5] Provide basic driver to control Arm R5 co-processor found on Xilinx ZynqMP Ben Levinsky 2020-09-02 16:58 ` Ben Levinsky 2020-09-02 16:58 ` Ben Levinsky [this message] 2020-09-02 16:58 ` [PATCH v11 1/5] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration Ben Levinsky 2020-09-02 16:58 ` [PATCH v11 2/5] firmware: xilinx: Add shutdown/wakeup APIs Ben Levinsky 2020-09-02 16:58 ` Ben Levinsky 2020-09-02 16:58 ` [PATCH v11 3/5] firmware: xilinx: Add RPU configuration APIs Ben Levinsky 2020-09-02 16:58 ` Ben Levinsky 2020-09-03 10:36 ` Punit Agrawal 2020-09-03 10:36 ` Punit Agrawal 2020-09-02 16:58 ` [PATCH v11 4/5] dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc bindings Ben Levinsky 2020-09-02 16:58 ` Ben Levinsky 2020-09-02 16:58 ` [PATCH v11 5/5] remoteproc: Add initial zynqmp R5 remoteproc driver Ben Levinsky 2020-09-02 16:58 ` Ben Levinsky 2020-09-03 10:44 ` Punit Agrawal 2020-09-03 10:44 ` Punit Agrawal
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200902165846.3366-2-ben.levinsky@xilinx.com \ --to=ben.levinsky@xilinx.com \ --cc=devicetree@vger.kernel.org \ --cc=emooring@xilinx.com \ --cc=jliang@xilinx.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=mathieu.poirier@linaro.org \ --cc=michael.auchter@ni.com \ --cc=michals@xilinx.com \ --cc=robh+dt@kernel.org \ --cc=stefanos@xilinx.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.