All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christoph Hellwig <hch@lst.de>
To: Linus Torvalds <torvalds@linux-foundation.org>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Michael Ellerman <mpe@ellerman.id.au>,
	x86@kernel.org
Cc: Alexey Dobriyan <adobriyan@gmail.com>,
	Luis Chamberlain <mcgrof@kernel.org>,
	Kees Cook <keescook@chromium.org>,
	linux-kernel@vger.kernel.org, linux-fsdevel@vger.kernel.org,
	linux-arch@vger.kernel.org, linuxppc-dev@lists.ozlabs.org
Subject: [PATCH 06/14] fs: don't allow splice read/write without explicit ops
Date: Thu,  3 Sep 2020 16:22:34 +0200	[thread overview]
Message-ID: <20200903142242.925828-7-hch@lst.de> (raw)
In-Reply-To: <20200903142242.925828-1-hch@lst.de>

default_file_splice_write is the last piece of generic code that uses
set_fs to make the uaccess routines operate on kernel pointers.  It
implements a "fallback loop" for splicing from files that do not actually
provide a proper splice_read method.  The usual file systems and other
high bandwidth instances all provide a ->splice_read, so this just removes
support for various device drivers and procfs/debugfs files.  If splice
support for any of those turns out to be important it can be added back
by switching them to the iter ops and using generic_file_splice_read.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 fs/read_write.c    |   2 +-
 fs/splice.c        | 130 +++++----------------------------------------
 include/linux/fs.h |   2 -
 3 files changed, 15 insertions(+), 119 deletions(-)

diff --git a/fs/read_write.c b/fs/read_write.c
index 702c4301d9eb6b..8c61f67453e3d3 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1077,7 +1077,7 @@ ssize_t vfs_iter_write(struct file *file, struct iov_iter *iter, loff_t *ppos,
 }
 EXPORT_SYMBOL(vfs_iter_write);
 
-ssize_t vfs_readv(struct file *file, const struct iovec __user *vec,
+static ssize_t vfs_readv(struct file *file, const struct iovec __user *vec,
 		  unsigned long vlen, loff_t *pos, rwf_t flags)
 {
 	struct iovec iovstack[UIO_FASTIOV];
diff --git a/fs/splice.c b/fs/splice.c
index d7c8a7c4db07ff..412df7b48f9eb7 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -342,89 +342,6 @@ const struct pipe_buf_operations nosteal_pipe_buf_ops = {
 };
 EXPORT_SYMBOL(nosteal_pipe_buf_ops);
 
-static ssize_t kernel_readv(struct file *file, const struct kvec *vec,
-			    unsigned long vlen, loff_t offset)
-{
-	mm_segment_t old_fs;
-	loff_t pos = offset;
-	ssize_t res;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	/* The cast to a user pointer is valid due to the set_fs() */
-	res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos, 0);
-	set_fs(old_fs);
-
-	return res;
-}
-
-static ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
-				 struct pipe_inode_info *pipe, size_t len,
-				 unsigned int flags)
-{
-	struct kvec *vec, __vec[PIPE_DEF_BUFFERS];
-	struct iov_iter to;
-	struct page **pages;
-	unsigned int nr_pages;
-	unsigned int mask;
-	size_t offset, base, copied = 0;
-	ssize_t res;
-	int i;
-
-	if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
-		return -EAGAIN;
-
-	/*
-	 * Try to keep page boundaries matching to source pagecache ones -
-	 * it probably won't be much help, but...
-	 */
-	offset = *ppos & ~PAGE_MASK;
-
-	iov_iter_pipe(&to, READ, pipe, len + offset);
-
-	res = iov_iter_get_pages_alloc(&to, &pages, len + offset, &base);
-	if (res <= 0)
-		return -ENOMEM;
-
-	nr_pages = DIV_ROUND_UP(res + base, PAGE_SIZE);
-
-	vec = __vec;
-	if (nr_pages > PIPE_DEF_BUFFERS) {
-		vec = kmalloc_array(nr_pages, sizeof(struct kvec), GFP_KERNEL);
-		if (unlikely(!vec)) {
-			res = -ENOMEM;
-			goto out;
-		}
-	}
-
-	mask = pipe->ring_size - 1;
-	pipe->bufs[to.head & mask].offset = offset;
-	pipe->bufs[to.head & mask].len -= offset;
-
-	for (i = 0; i < nr_pages; i++) {
-		size_t this_len = min_t(size_t, len, PAGE_SIZE - offset);
-		vec[i].iov_base = page_address(pages[i]) + offset;
-		vec[i].iov_len = this_len;
-		len -= this_len;
-		offset = 0;
-	}
-
-	res = kernel_readv(in, vec, nr_pages, *ppos);
-	if (res > 0) {
-		copied = res;
-		*ppos += res;
-	}
-
-	if (vec != __vec)
-		kfree(vec);
-out:
-	for (i = 0; i < nr_pages; i++)
-		put_page(pages[i]);
-	kvfree(pages);
-	iov_iter_advance(&to, copied);	/* truncates and discards */
-	return res;
-}
-
 /*
  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
  * using sendpage(). Return the number of bytes sent.
@@ -788,33 +705,6 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 
 EXPORT_SYMBOL(iter_file_splice_write);
 
-static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
-			  struct splice_desc *sd)
-{
-	int ret;
-	void *data;
-	loff_t tmp = sd->pos;
-
-	data = kmap(buf->page);
-	ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
-	kunmap(buf->page);
-
-	return ret;
-}
-
-static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
-					 struct file *out, loff_t *ppos,
-					 size_t len, unsigned int flags)
-{
-	ssize_t ret;
-
-	ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
-	if (ret > 0)
-		*ppos += ret;
-
-	return ret;
-}
-
 /**
  * generic_splice_sendpage - splice data from a pipe to a socket
  * @pipe:	pipe to splice from
@@ -836,15 +726,23 @@ ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
 
 EXPORT_SYMBOL(generic_splice_sendpage);
 
+static int warn_unsupported(struct file *file, const char *op)
+{
+	pr_debug_ratelimited(
+		"splice %s not supported for file %pD4 (pid: %d comm: %.20s)\n",
+		op, file, current->pid, current->comm);
+	return -EINVAL;
+}
+
 /*
  * Attempt to initiate a splice from pipe to file.
  */
 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 			   loff_t *ppos, size_t len, unsigned int flags)
 {
-	if (out->f_op->splice_write)
-		return out->f_op->splice_write(pipe, out, ppos, len, flags);
-	return default_file_splice_write(pipe, out, ppos, len, flags);
+	if (unlikely(!out->f_op->splice_write))
+		return warn_unsupported(out, "write");
+	return out->f_op->splice_write(pipe, out, ppos, len, flags);
 }
 
 /*
@@ -866,9 +764,9 @@ static long do_splice_to(struct file *in, loff_t *ppos,
 	if (unlikely(len > MAX_RW_COUNT))
 		len = MAX_RW_COUNT;
 
-	if (in->f_op->splice_read)
-		return in->f_op->splice_read(in, ppos, pipe, len, flags);
-	return default_file_splice_read(in, ppos, pipe, len, flags);
+	if (unlikely(!in->f_op->splice_read))
+		return warn_unsupported(in, "read");
+	return in->f_op->splice_read(in, ppos, pipe, len, flags);
 }
 
 /**
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7519ae003a082c..839eeccf10174b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1894,8 +1894,6 @@ ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
 
 extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
 extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
-extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
-		unsigned long, loff_t *, rwf_t);
 extern ssize_t vfs_copy_file_range(struct file *, loff_t , struct file *,
 				   loff_t, size_t, unsigned int);
 extern ssize_t generic_copy_file_range(struct file *file_in, loff_t pos_in,
-- 
2.28.0


WARNING: multiple messages have this Message-ID (diff)
From: Christoph Hellwig <hch@lst.de>
To: Linus Torvalds <torvalds@linux-foundation.org>,
	Al Viro <viro@zeniv.linux.org.uk>,
	Michael Ellerman <mpe@ellerman.id.au>,
	x86@kernel.org
Cc: linux-arch@vger.kernel.org, Kees Cook <keescook@chromium.org>,
	linux-kernel@vger.kernel.org,
	Luis Chamberlain <mcgrof@kernel.org>,
	linux-fsdevel@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	Alexey Dobriyan <adobriyan@gmail.com>
Subject: [PATCH 06/14] fs: don't allow splice read/write without explicit ops
Date: Thu,  3 Sep 2020 16:22:34 +0200	[thread overview]
Message-ID: <20200903142242.925828-7-hch@lst.de> (raw)
In-Reply-To: <20200903142242.925828-1-hch@lst.de>

default_file_splice_write is the last piece of generic code that uses
set_fs to make the uaccess routines operate on kernel pointers.  It
implements a "fallback loop" for splicing from files that do not actually
provide a proper splice_read method.  The usual file systems and other
high bandwidth instances all provide a ->splice_read, so this just removes
support for various device drivers and procfs/debugfs files.  If splice
support for any of those turns out to be important it can be added back
by switching them to the iter ops and using generic_file_splice_read.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
---
 fs/read_write.c    |   2 +-
 fs/splice.c        | 130 +++++----------------------------------------
 include/linux/fs.h |   2 -
 3 files changed, 15 insertions(+), 119 deletions(-)

diff --git a/fs/read_write.c b/fs/read_write.c
index 702c4301d9eb6b..8c61f67453e3d3 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1077,7 +1077,7 @@ ssize_t vfs_iter_write(struct file *file, struct iov_iter *iter, loff_t *ppos,
 }
 EXPORT_SYMBOL(vfs_iter_write);
 
-ssize_t vfs_readv(struct file *file, const struct iovec __user *vec,
+static ssize_t vfs_readv(struct file *file, const struct iovec __user *vec,
 		  unsigned long vlen, loff_t *pos, rwf_t flags)
 {
 	struct iovec iovstack[UIO_FASTIOV];
diff --git a/fs/splice.c b/fs/splice.c
index d7c8a7c4db07ff..412df7b48f9eb7 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -342,89 +342,6 @@ const struct pipe_buf_operations nosteal_pipe_buf_ops = {
 };
 EXPORT_SYMBOL(nosteal_pipe_buf_ops);
 
-static ssize_t kernel_readv(struct file *file, const struct kvec *vec,
-			    unsigned long vlen, loff_t offset)
-{
-	mm_segment_t old_fs;
-	loff_t pos = offset;
-	ssize_t res;
-
-	old_fs = get_fs();
-	set_fs(KERNEL_DS);
-	/* The cast to a user pointer is valid due to the set_fs() */
-	res = vfs_readv(file, (const struct iovec __user *)vec, vlen, &pos, 0);
-	set_fs(old_fs);
-
-	return res;
-}
-
-static ssize_t default_file_splice_read(struct file *in, loff_t *ppos,
-				 struct pipe_inode_info *pipe, size_t len,
-				 unsigned int flags)
-{
-	struct kvec *vec, __vec[PIPE_DEF_BUFFERS];
-	struct iov_iter to;
-	struct page **pages;
-	unsigned int nr_pages;
-	unsigned int mask;
-	size_t offset, base, copied = 0;
-	ssize_t res;
-	int i;
-
-	if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
-		return -EAGAIN;
-
-	/*
-	 * Try to keep page boundaries matching to source pagecache ones -
-	 * it probably won't be much help, but...
-	 */
-	offset = *ppos & ~PAGE_MASK;
-
-	iov_iter_pipe(&to, READ, pipe, len + offset);
-
-	res = iov_iter_get_pages_alloc(&to, &pages, len + offset, &base);
-	if (res <= 0)
-		return -ENOMEM;
-
-	nr_pages = DIV_ROUND_UP(res + base, PAGE_SIZE);
-
-	vec = __vec;
-	if (nr_pages > PIPE_DEF_BUFFERS) {
-		vec = kmalloc_array(nr_pages, sizeof(struct kvec), GFP_KERNEL);
-		if (unlikely(!vec)) {
-			res = -ENOMEM;
-			goto out;
-		}
-	}
-
-	mask = pipe->ring_size - 1;
-	pipe->bufs[to.head & mask].offset = offset;
-	pipe->bufs[to.head & mask].len -= offset;
-
-	for (i = 0; i < nr_pages; i++) {
-		size_t this_len = min_t(size_t, len, PAGE_SIZE - offset);
-		vec[i].iov_base = page_address(pages[i]) + offset;
-		vec[i].iov_len = this_len;
-		len -= this_len;
-		offset = 0;
-	}
-
-	res = kernel_readv(in, vec, nr_pages, *ppos);
-	if (res > 0) {
-		copied = res;
-		*ppos += res;
-	}
-
-	if (vec != __vec)
-		kfree(vec);
-out:
-	for (i = 0; i < nr_pages; i++)
-		put_page(pages[i]);
-	kvfree(pages);
-	iov_iter_advance(&to, copied);	/* truncates and discards */
-	return res;
-}
-
 /*
  * Send 'sd->len' bytes to socket from 'sd->file' at position 'sd->pos'
  * using sendpage(). Return the number of bytes sent.
@@ -788,33 +705,6 @@ iter_file_splice_write(struct pipe_inode_info *pipe, struct file *out,
 
 EXPORT_SYMBOL(iter_file_splice_write);
 
-static int write_pipe_buf(struct pipe_inode_info *pipe, struct pipe_buffer *buf,
-			  struct splice_desc *sd)
-{
-	int ret;
-	void *data;
-	loff_t tmp = sd->pos;
-
-	data = kmap(buf->page);
-	ret = __kernel_write(sd->u.file, data + buf->offset, sd->len, &tmp);
-	kunmap(buf->page);
-
-	return ret;
-}
-
-static ssize_t default_file_splice_write(struct pipe_inode_info *pipe,
-					 struct file *out, loff_t *ppos,
-					 size_t len, unsigned int flags)
-{
-	ssize_t ret;
-
-	ret = splice_from_pipe(pipe, out, ppos, len, flags, write_pipe_buf);
-	if (ret > 0)
-		*ppos += ret;
-
-	return ret;
-}
-
 /**
  * generic_splice_sendpage - splice data from a pipe to a socket
  * @pipe:	pipe to splice from
@@ -836,15 +726,23 @@ ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out,
 
 EXPORT_SYMBOL(generic_splice_sendpage);
 
+static int warn_unsupported(struct file *file, const char *op)
+{
+	pr_debug_ratelimited(
+		"splice %s not supported for file %pD4 (pid: %d comm: %.20s)\n",
+		op, file, current->pid, current->comm);
+	return -EINVAL;
+}
+
 /*
  * Attempt to initiate a splice from pipe to file.
  */
 static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
 			   loff_t *ppos, size_t len, unsigned int flags)
 {
-	if (out->f_op->splice_write)
-		return out->f_op->splice_write(pipe, out, ppos, len, flags);
-	return default_file_splice_write(pipe, out, ppos, len, flags);
+	if (unlikely(!out->f_op->splice_write))
+		return warn_unsupported(out, "write");
+	return out->f_op->splice_write(pipe, out, ppos, len, flags);
 }
 
 /*
@@ -866,9 +764,9 @@ static long do_splice_to(struct file *in, loff_t *ppos,
 	if (unlikely(len > MAX_RW_COUNT))
 		len = MAX_RW_COUNT;
 
-	if (in->f_op->splice_read)
-		return in->f_op->splice_read(in, ppos, pipe, len, flags);
-	return default_file_splice_read(in, ppos, pipe, len, flags);
+	if (unlikely(!in->f_op->splice_read))
+		return warn_unsupported(in, "read");
+	return in->f_op->splice_read(in, ppos, pipe, len, flags);
 }
 
 /**
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 7519ae003a082c..839eeccf10174b 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1894,8 +1894,6 @@ ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
 
 extern ssize_t vfs_read(struct file *, char __user *, size_t, loff_t *);
 extern ssize_t vfs_write(struct file *, const char __user *, size_t, loff_t *);
-extern ssize_t vfs_readv(struct file *, const struct iovec __user *,
-		unsigned long, loff_t *, rwf_t);
 extern ssize_t vfs_copy_file_range(struct file *, loff_t , struct file *,
 				   loff_t, size_t, unsigned int);
 extern ssize_t generic_copy_file_range(struct file *file_in, loff_t pos_in,
-- 
2.28.0


  parent reply	other threads:[~2020-09-03 14:27 UTC|newest]

Thread overview: 115+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-03 14:22 remove the last set_fs() in common code, and remove it for x86 and powerpc v3 Christoph Hellwig
2020-09-03 14:22 ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 01/14] proc: remove a level of indentation in proc_get_inode Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 02/14] proc: cleanup the compat vs no compat file ops Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 03/14] proc: add a read_iter method to proc proc_ops Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 04/14] sysctl: Convert to iter interfaces Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 05/14] fs: don't allow kernel reads and writes without iter ops Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-10-01 22:38   ` Eric Biggers
2020-10-01 22:38     ` Eric Biggers
2020-10-01 22:40     ` Al Viro
2020-10-01 22:40       ` Al Viro
2020-10-02 16:27       ` Linus Torvalds
2020-10-02 16:27         ` Linus Torvalds
2020-10-09 22:06         ` Eric Biggers
2020-10-09 22:06           ` Eric Biggers
2020-10-10  1:03           ` Linus Torvalds
2020-10-10  1:03             ` Linus Torvalds
2020-10-10  1:19             ` Eric Biggers
2020-10-10  1:19               ` Eric Biggers
2020-10-10  1:29               ` Linus Torvalds
2020-10-10  1:29                 ` Linus Torvalds
2020-10-10  1:55                 ` Alexander Viro
2020-10-10  1:55                   ` Alexander Viro
2020-10-14  5:51                   ` Christoph Hellwig
2020-10-14  5:51                     ` Christoph Hellwig
2020-09-03 14:22 ` Christoph Hellwig [this message]
2020-09-03 14:22   ` [PATCH 06/14] fs: don't allow splice read/write without explicit ops Christoph Hellwig
2020-09-03 14:22 ` [PATCH 07/14] uaccess: add infrastructure for kernel builds with set_fs() Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 08/14] test_bitmap: remove user bitmap tests Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 09/14] lkdtm: remove set_fs-based tests Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 10/14] x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32,64}_types.h Christoph Hellwig
2020-09-03 14:22   ` [PATCH 10/14] x86: move PAGE_OFFSET, TASK_SIZE & friends to page_{32, 64}_types.h Christoph Hellwig
2020-09-03 14:22 ` [PATCH 11/14] x86: make TASK_SIZE_MAX usable from assembly code Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 12/14] x86: remove address space overrides using set_fs() Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 21:30   ` David Laight
2020-09-03 21:30     ` David Laight
2020-09-03 23:25     ` Linus Torvalds
2020-09-03 23:25       ` Linus Torvalds
2020-09-04  7:59       ` David Laight
2020-09-04  7:59         ` David Laight
2020-09-04  2:55   ` Al Viro
2020-09-04  2:55     ` Al Viro
2020-09-04  4:41     ` Al Viro
2020-09-04  4:41       ` Al Viro
2020-09-04  6:38     ` Christoph Hellwig
2020-09-04  6:38       ` Christoph Hellwig
2020-09-04  7:47       ` Christoph Hellwig
2020-09-04  7:47         ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 13/14] powerpc: use non-set_fs based maccess routines Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 14:22 ` [PATCH 14/14] powerpc: remove address space overrides using set_fs() Christoph Hellwig
2020-09-03 14:22   ` Christoph Hellwig
2020-09-03 15:43   ` Christophe Leroy
2020-09-03 15:49     ` Christoph Hellwig
2020-09-03 15:49       ` Christoph Hellwig
2020-09-03 15:56       ` Christoph Hellwig
2020-09-03 15:56         ` Christoph Hellwig
2020-09-03 16:03         ` Christophe Leroy
2020-09-03 16:03           ` Christophe Leroy
2020-09-03 14:28 ` remove the last set_fs() in common code, and remove it for x86 and powerpc v3 Al Viro
2020-09-03 14:28   ` Al Viro
2020-09-03 14:30   ` Christoph Hellwig
2020-09-03 14:30     ` Christoph Hellwig
2020-09-03 14:36     ` Al Viro
2020-09-03 14:36       ` Al Viro
2020-09-03 14:40       ` Christoph Hellwig
2020-09-03 14:40         ` Christoph Hellwig
2020-09-09 17:31   ` Linus Torvalds
2020-09-09 17:31     ` Linus Torvalds
2020-09-09 18:40     ` Segher Boessenkool
2020-09-09 18:40       ` Segher Boessenkool
2020-09-09 21:33       ` Linus Torvalds
2020-09-09 21:33         ` Linus Torvalds
2020-09-10  8:04         ` David Laight
2020-09-10  8:04           ` David Laight
2020-09-10  8:13           ` Christophe Leroy
2020-09-10  8:13             ` Christophe Leroy
2020-09-10  9:26             ` David Laight
2020-09-10  9:26               ` David Laight
2020-09-10 12:26               ` David Laight
2020-09-10 12:26                 ` David Laight
2020-09-10 15:20                 ` Segher Boessenkool
2020-09-10 15:20                   ` Segher Boessenkool
2020-09-10 15:31                   ` David Laight
2020-09-10 15:31                     ` David Laight
2020-09-10 17:15                     ` Segher Boessenkool
2020-09-10 17:15                       ` Segher Boessenkool
2020-09-10 15:16               ` Segher Boessenkool
2020-09-10 15:16                 ` Segher Boessenkool
2020-09-10 15:44         ` Segher Boessenkool
2020-09-10 15:44           ` Segher Boessenkool
2020-09-03 15:49 ` Linus Torvalds
2020-09-03 15:49   ` Linus Torvalds
2020-09-04  6:00 ` Ingo Molnar
2020-09-04  6:00   ` Ingo Molnar
2020-09-04 17:58   ` Alexey Dobriyan
2020-09-04 17:58     ` Alexey Dobriyan
2020-09-04 18:42     ` Linus Torvalds
2020-09-04 18:42       ` Linus Torvalds
2020-09-04 21:01     ` David Laight
2020-09-04 21:01       ` David Laight
2020-09-05  7:16       ` Christophe Leroy
2020-09-05  7:16         ` Christophe Leroy
2020-09-05 10:13         ` David Laight
2020-09-05 10:13           ` David Laight

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200903142242.925828-7-hch@lst.de \
    --to=hch@lst.de \
    --cc=adobriyan@gmail.com \
    --cc=keescook@chromium.org \
    --cc=linux-arch@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mcgrof@kernel.org \
    --cc=mpe@ellerman.id.au \
    --cc=torvalds@linux-foundation.org \
    --cc=viro@zeniv.linux.org.uk \
    --cc=x86@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.