All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Marek <jonathan@marek.ca>
To: linux-arm-msm@vger.kernel.org
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	linux-kernel@vger.kernel.org (open list),
	linux-clk@vger.kernel.org (open list:COMMON CLK FRAMEWORK)
Subject: [PATCH v2 4/5] clk: qcom: add video clock controller driver for SM8150
Date: Thu,  3 Sep 2020 23:09:53 -0400	[thread overview]
Message-ID: <20200904030958.13325-5-jonathan@marek.ca> (raw)
In-Reply-To: <20200904030958.13325-1-jonathan@marek.ca>

Add support for the video clock controller found on SM8150 based devices.

Derived from the downstream driver.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
---
 drivers/clk/qcom/Kconfig          |   9 +
 drivers/clk/qcom/Makefile         |   1 +
 drivers/clk/qcom/videocc-sm8150.c | 276 ++++++++++++++++++++++++++++++
 3 files changed, 286 insertions(+)
 create mode 100644 drivers/clk/qcom/videocc-sm8150.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 058327310c25..40d7ee9886c9 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -444,6 +444,15 @@ config SM_GPUCC_8250
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.
 
+config SM_VIDEOCC_8150
+	tristate "SM8150 Video Clock Controller"
+	select SDM_GCC_8150
+	select QCOM_GDSC
+	help
+	  Support for the video clock controller on SM8150 devices.
+	  Say Y if you want to support video devices and functionality such as
+	  video encode and decode.
+
 config SPMI_PMIC_CLKDIV
 	tristate "SPMI PMIC clkdiv Support"
 	depends on SPMI || COMPILE_TEST
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 9677e769e7e9..6f4c580d2728 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -68,6 +68,7 @@ obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o
 obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o
 obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
 obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
+obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
 obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
 obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
diff --git a/drivers/clk/qcom/videocc-sm8150.c b/drivers/clk/qcom/videocc-sm8150.c
new file mode 100644
index 000000000000..3087e2ec8fd4
--- /dev/null
+++ b/drivers/clk/qcom/videocc-sm8150.c
@@ -0,0 +1,276 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
+
+#include "common.h"
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "reset.h"
+#include "gdsc.h"
+
+enum {
+	P_BI_TCXO,
+	P_CHIP_SLEEP_CLK,
+	P_CORE_BI_PLL_TEST_SE,
+	P_VIDEO_PLL0_OUT_EVEN,
+	P_VIDEO_PLL0_OUT_MAIN,
+	P_VIDEO_PLL0_OUT_ODD,
+};
+
+static struct pll_vco trion_vco[] = {
+	{ 249600000, 2000000000, 0 },
+};
+
+static struct alpha_pll_config video_pll0_config = {
+	.l = 0x14,
+	.alpha = 0xD555,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002267,
+	.config_ctl_hi1_val = 0x00000024,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x000000D0,
+};
+
+static struct clk_alpha_pll video_pll0 = {
+	.offset = 0x42c,
+	.vco_table = trion_vco,
+	.num_vco = ARRAY_SIZE(trion_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_TRION],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "video_pll0",
+			.parent_data = &(const struct clk_parent_data){
+				.fw_name = "bi_tcxo",
+			},
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_trion_ops,
+		},
+	},
+};
+
+static const struct parent_map video_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_VIDEO_PLL0_OUT_MAIN, 1 },
+};
+
+static const struct clk_parent_data video_cc_parent_data_0[] = {
+	{ .fw_name = "bi_tcxo" },
+	{ .hw = &video_pll0.clkr.hw },
+};
+
+static const struct freq_tbl ftbl_video_cc_iris_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(200000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(240000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(338000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(365000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(444000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	F(533000000, P_VIDEO_PLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 video_cc_iris_clk_src = {
+	.cmd_rcgr = 0x7f0,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = video_cc_parent_map_0,
+	.freq_tbl = ftbl_video_cc_iris_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "video_cc_iris_clk_src",
+		.parent_data = video_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(video_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_shared_ops,
+	},
+};
+
+static struct clk_branch video_cc_iris_ahb_clk = {
+	.halt_reg = 0x8f4,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x8f4,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_iris_ahb_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs0_core_clk = {
+	.halt_reg = 0x890,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x890,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs0_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvs1_core_clk = {
+	.halt_reg = 0x8d0,
+	.halt_check = BRANCH_VOTED,
+	.clkr = {
+		.enable_reg = 0x8d0,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvs1_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch video_cc_mvsc_core_clk = {
+	.halt_reg = 0x850,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x850,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "video_cc_mvsc_core_clk",
+			.parent_data = &(const struct clk_parent_data){
+				.hw = &video_cc_iris_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc venus_gdsc = {
+	.gdscr = 0x814,
+	.pd = {
+		.name = "venus_gdsc",
+	},
+	.flags = 0,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec0_gdsc = {
+	.gdscr = 0x874,
+	.pd = {
+		.name = "vcodec0_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc vcodec1_gdsc = {
+	.gdscr = 0x8b4,
+	.pd = {
+		.name = "vcodec1_gdsc",
+	},
+	.flags = HW_CTRL,
+	.pwrsts = PWRSTS_OFF_ON,
+};
+static struct clk_regmap *video_cc_sm8150_clocks[] = {
+	[VIDEO_CC_IRIS_AHB_CLK] = &video_cc_iris_ahb_clk.clkr,
+	[VIDEO_CC_IRIS_CLK_SRC] = &video_cc_iris_clk_src.clkr,
+	[VIDEO_CC_MVS0_CORE_CLK] = &video_cc_mvs0_core_clk.clkr,
+	[VIDEO_CC_MVS1_CORE_CLK] = &video_cc_mvs1_core_clk.clkr,
+	[VIDEO_CC_MVSC_CORE_CLK] = &video_cc_mvsc_core_clk.clkr,
+	[VIDEO_CC_PLL0] = &video_pll0.clkr,
+};
+
+static struct gdsc *video_cc_sm8150_gdscs[] = {
+	[VENUS_GDSC] = &venus_gdsc,
+	[VCODEC0_GDSC] = &vcodec0_gdsc,
+	[VCODEC1_GDSC] = &vcodec1_gdsc,
+};
+
+static const struct regmap_config video_cc_sm8150_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+	.max_register	= 0xb94,
+	.fast_io	= true,
+};
+
+static const struct qcom_reset_map video_cc_sm8150_resets[] = {
+	[VIDEO_CC_MVSC_CORE_CLK_BCR] = { 0x850, 2 },
+};
+
+static const struct qcom_cc_desc video_cc_sm8150_desc = {
+	.config = &video_cc_sm8150_regmap_config,
+	.clks = video_cc_sm8150_clocks,
+	.num_clks = ARRAY_SIZE(video_cc_sm8150_clocks),
+	.resets = video_cc_sm8150_resets,
+	.num_resets = ARRAY_SIZE(video_cc_sm8150_resets),
+	.gdscs = video_cc_sm8150_gdscs,
+	.num_gdscs = ARRAY_SIZE(video_cc_sm8150_gdscs),
+};
+
+static const struct of_device_id video_cc_sm8150_match_table[] = {
+	{ .compatible = "qcom,sm8150-videocc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, video_cc_sm8150_match_table);
+
+static int video_cc_sm8150_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &video_cc_sm8150_desc);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	clk_trion_pll_configure(&video_pll0, regmap, &video_pll0_config);
+
+	/* Keep VIDEO_CC_XO_CLK ALWAYS-ON */
+	regmap_update_bits(regmap, 0x984, 0x1, 0x1);
+
+	return qcom_cc_really_probe(pdev, &video_cc_sm8150_desc, regmap);
+}
+
+static struct platform_driver video_cc_sm8150_driver = {
+	.probe = video_cc_sm8150_probe,
+	.driver = {
+		.name	= "video_cc-sm8150",
+		.of_match_table = video_cc_sm8150_match_table,
+	},
+};
+
+static int __init video_cc_sm8150_init(void)
+{
+	return platform_driver_register(&video_cc_sm8150_driver);
+}
+subsys_initcall(video_cc_sm8150_init);
+
+static void __exit video_cc_sm8150_exit(void)
+{
+	platform_driver_unregister(&video_cc_sm8150_driver);
+}
+module_exit(video_cc_sm8150_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QTI VIDEOCC SM8150 Driver");
-- 
2.26.1


  parent reply	other threads:[~2020-09-04  3:11 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-04  3:09 [PATCH v2 0/5] SM8150 and SM8250 videocc drivers Jonathan Marek
2020-09-04  3:09 ` [PATCH v2 1/5] dt-bindings: clock: combine qcom,sdm845-videocc and qcom,sc7180-videocc Jonathan Marek
2020-09-14 21:01   ` Rob Herring
2020-09-22 18:47   ` Stephen Boyd
2020-09-04  3:09 ` [PATCH v2 2/5] dt-bindings: clock: add SM8150 QCOM video clock bindings Jonathan Marek
2020-09-14 21:02   ` Rob Herring
2020-09-22 18:48   ` Stephen Boyd
2020-09-04  3:09 ` [PATCH v2 3/5] dt-bindings: clock: add SM8250 " Jonathan Marek
2020-09-14 21:03   ` Rob Herring
2020-09-22 18:49   ` Stephen Boyd
2020-09-04  3:09 ` Jonathan Marek [this message]
2020-09-04  3:09 ` [PATCH v2 5/5] clk: qcom: add video clock controller driver for SM8250 Jonathan Marek
2020-09-22 18:46   ` Stephen Boyd
2020-09-23 16:07     ` Jonathan Marek
2020-09-23 23:30       ` Stephen Boyd
2020-09-24  0:54         ` Jonathan Marek
2020-09-24  6:17           ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200904030958.13325-5-jonathan@marek.ca \
    --to=jonathan@marek.ca \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.