From: Krzysztof Kozlowski <krzk@kernel.org> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Rob Herring <robh+dt@kernel.org>, Lihua Yao <ylhuajnu@outlook.com>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Marek Szyprowski <m.szyprowski@samsung.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Sylwester Nawrocki <snawrocki@kernel.org>, Tomasz Figa <tomasz.figa@gmail.com> Subject: [PATCH 02/11] ARM: dts: s3c6410: move fixed clocks under root node in Mini6410 Date: Mon, 7 Sep 2020 20:33:04 +0200 [thread overview] Message-ID: <20200907183313.29234-3-krzk@kernel.org> (raw) In-Reply-To: <20200907183313.29234-1-krzk@kernel.org> The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/s3c6410-mini6410.dts | 30 ++++++++++---------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1aeac33b0d34..75067dbcf7e8 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -28,26 +28,18 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; srom-cs1@18000000 { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org> To: Kukjin Kim <kgene@kernel.org>, Krzysztof Kozlowski <krzk@kernel.org>, Rob Herring <robh+dt@kernel.org>, Lihua Yao <ylhuajnu@outlook.com>, linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: Sylwester Nawrocki <snawrocki@kernel.org>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Tomasz Figa <tomasz.figa@gmail.com>, Marek Szyprowski <m.szyprowski@samsung.com> Subject: [PATCH 02/11] ARM: dts: s3c6410: move fixed clocks under root node in Mini6410 Date: Mon, 7 Sep 2020 20:33:04 +0200 [thread overview] Message-ID: <20200907183313.29234-3-krzk@kernel.org> (raw) In-Reply-To: <20200907183313.29234-1-krzk@kernel.org> The fixed clocks are kept under dedicated 'clocks' node but this causes multiple dtschema warnings: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' clocks: #size-cells:0:0: 0 is not one of [1, 2] clocks: oscillator@0:reg:0: [0] is too short clocks: oscillator@1:reg:0: [1] is too short clocks: 'ranges' is a required property oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- arch/arm/boot/dts/s3c6410-mini6410.dts | 30 ++++++++++---------------- 1 file changed, 11 insertions(+), 19 deletions(-) diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts index 1aeac33b0d34..75067dbcf7e8 100644 --- a/arch/arm/boot/dts/s3c6410-mini6410.dts +++ b/arch/arm/boot/dts/s3c6410-mini6410.dts @@ -28,26 +28,18 @@ bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1"; }; - clocks { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - fin_pll: oscillator@0 { - compatible = "fixed-clock"; - reg = <0>; - clock-frequency = <12000000>; - clock-output-names = "fin_pll"; - #clock-cells = <0>; - }; + fin_pll: oscillator-0 { + compatible = "fixed-clock"; + clock-frequency = <12000000>; + clock-output-names = "fin_pll"; + #clock-cells = <0>; + }; - xusbxti: oscillator@1 { - compatible = "fixed-clock"; - reg = <1>; - clock-output-names = "xusbxti"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; + xusbxti: oscillator-1 { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <48000000>; + #clock-cells = <0>; }; srom-cs1@18000000 { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-07 18:34 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-07 18:33 [PATCH 00/11] ARM: dts: s3c: dtschema fixes Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 01/11] ARM: dts: s5pv210: Correct ethernet unit address in SMDKV210 Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-11 14:36 ` Krzysztof Kozlowski 2020-09-11 14:36 ` Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski [this message] 2020-09-07 18:33 ` [PATCH 02/11] ARM: dts: s3c6410: move fixed clocks under root node in Mini6410 Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 03/11] ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410 Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 04/11] ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410 Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 05/11] ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410 Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 06/11] ARM: dts: s3c6410: remove additional CPU compatible Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 07/11] ARM: dts: s3c24xx: fix number of PWM cells Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 08/11] ARM: dts: s3c24xx: override nods by label Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 09/11] ARM: dts: s3c24xx: align PWM/timer node name with dtschema Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 10/11] ARM: dts: s3c24xx: add address to CPU node Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-07 18:33 ` [PATCH 11/11] ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416 Krzysztof Kozlowski 2020-09-07 18:33 ` Krzysztof Kozlowski 2020-09-11 14:38 ` [PATCH 00/11] ARM: dts: s3c: dtschema fixes Krzysztof Kozlowski 2020-09-11 14:38 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200907183313.29234-3-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=b.zolnierkie@samsung.com \ --cc=devicetree@vger.kernel.org \ --cc=kgene@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-samsung-soc@vger.kernel.org \ --cc=m.szyprowski@samsung.com \ --cc=robh+dt@kernel.org \ --cc=snawrocki@kernel.org \ --cc=tomasz.figa@gmail.com \ --cc=ylhuajnu@outlook.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.